combi feed used for sale

Equipped with: 2 vertical augers with overlap system, heavy duty planetary mixing gearboxes, two mixer speeds, mechanical control, knives on auger made of high-strength steel, 11 pieces of knives per auger, four mechanically operated counter knives, hydraulic unloading door, hydraulic support leg, I-Feed weighing system with one display and 4 scales, wide-angle PTO, two-sided unloading possibility front, tires 28x12.5-15, power requirement 95Hp. Auction-ID: A1-47391-117

Equipped with 2 vertical jacks; single-sided rear unloading; control box; weighing device; ring towbar; Auction-ID: A1-47391-110

Equipped with 6-Cil. \"FPT\"Diesel engine 175 hp; camera system; weighing device; double-sided dispensing; 2 mixing augers; inlet width approx. 200cm; Auction-ID: A1-47391-12

Serial No.:553776/1, length 490 mm New from stock liquidation Auction-ID: A1-50529-529

mounted on a mobile chassis; equipped with torch; pipes; grounding clamp; Auction-ID: A1-44050-152

Set consisting of 9 bags of Perfect Fit kibble for dogs, weighing 6 kg each. Auction-ID: A1-50192-309

Technical data Manufacturer: MAZAK Corporation Model: Quick Turn 10N / QT 10N UNIV. Year of manufacture: 03/1987 Control: MAZATROL CAM T-2 Weight according to nameplate: 7,500 lbs Connection according to the marking: 380 V Max. swing diameter: 440 mm (Source: Online research) Max. machining length: 507 mm (Source: Online Research) Spindle speed: 10–2,600 rpm (source: online research) Spindle bore: 56 mm (Source: Online research) Travel X/Z: 155 / 540 mm (Source: Online Research) Tool turret: 8 positions (Source: Online Research) Configuration CNC lathe with tool turret and chuck. MAZATROL CAM T-2 CNC control with screen and control panel. Attached bar feeder available for material feeding. Lateral chip conveyor available. Closed work area with sliding door. Control was on at the time of shooting. Remarks The machine comes from a well-maintained company liq ...

Basket size LxWxH:530 x 320 x 200 mm Max. basket weight:50 kg capacity:4 Körbe/h; baskets/h No. of washing chambers:1 No. Of tanks for washing:1 No. Of tnks for conserving:1 Cleaning medium:Tetrachlorethen Electrical heating power:42 kW Machine size LxWxH:4 x 3 x 2 m

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Karl Schnell GmbH & Co.KG feed hopper with 2 s/s augers on weighing cells, type: 675, machine number: 14376, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 40 A, 20 kW, volume: 2000 liter, with Fristam product lobe pump, type FKL50 and Fristam CIP pump, type FPE 3532/175, total dimensions: 3680 mm x 1700 mm x 2140 mm.

rolls: 4; speed: 2 - 30 m/min; number of speeds: 2 Getriebe, 2 Motor, 2 Zahnrad-wechsel (8);