combi feed used for sale

Eccentric punching machine HAULICK + ROOS type RVD 125Double column - Eccentric pressMasch. No. 212560 Year of construction 1981Compressive force 125 ton. Table size 880 x 800 mmTable opening 470 x 140 mmStand width 900 mmStand width laterally 415 mmRam stroke 45 mmRam adjustment range 0-80 mmInstallation height in the picture 340 mmStroke rate 50 to 300 strokes/min. Engine power main drive 22 kWNe-connection 380 Volt, 50 Hz- Double connecting rod engine with 4-bearing eccentric shaft for off-center tappet pressure

Hethon 71 Hopper and screw feed 2018, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock

Vibratory Feeders Manufacturer: Vibra Schultheis Type ER 11 No. 7174 Oscillation frequency 50 / 60 Hz Power 60 VA, 0.22 A, channel width approx. 70 mm, channel length approx. 500 mm, permissible payload approx. 1-3 kg Flow rate for plastic granulate max. approx. 1 m³/h ER 11 incl. Electric Thyristor Controllers VST

Feeder WGOMA VS 34 -used-incl. Tripod---------- Technical data ----------castors: 3 pieces, number of speeds: 4

vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 Fpobmafvewav R Sjpxok vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition!

E+K SORTIERSYSTEM EMSE-55GU 800mm stainless steel vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Automatic Pile Feeder Multigraf PFA-52 (originally) - Own drive and vacuum pump (230V) - Side-lay register - Modularly expandable and customizable - with extra long feed table Paper format max. 520 x 1050 mm Grammage range up to approx. 500g/sqm The feeder was previously operated in combination with a UV varnishing machine., Year of build: Unknown, Type of control: conventional, Stock location: 75242 Neuhausen DE, Coutry of origin: Switzerland, Delivery time: immediately available, Freight base: free loaded truck

3 Jaw Lining SMW 250 BH At Für are more than 30 pairs of baking part nail new ! Condition very good Shipping with cargo transport possible for an extra charge. Invoice with VAT.

Manufacturer: SPINNER Model: SERVO - LOAD 80 - 1200 Year of Manufacture: 2011 Voltage (U): 3/PE ~ 400 V Frequency (f): 50/60 Hz Input Current (Iᵍ): 5 A Fuse Rating (Iₙ): 10 A Find more here - / Contact us at -

Nimo feeding SKV 300, in very good condition, tipping height: 1,550 mm

VSA 2032 Feed 3 feed rollers 4 speeds Speeds: 4/8/9/18 m/min Roll diameter 80mm Motor 180W 400V 50Hz G&STÜ-5119032

Cap feeder for various types of caps, tubes, small bottles, etc. Weckerle Kappen B Stainless steel Year 1998 2 pc available

Cap feeder for various types of caps, tubes, small bottles, etc. Stailess steel Year 2005

ADMV Tube feeder The machine has been used as a mascara tube feeder Siemens control panel

But here I have an automation component of an old system. These are two vibratory conveyors and associated elements.

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

with EZ3200 weighing device, Volume / capacity (m3 / l): 14, Working hours: 1, Year of construction: 1

Switches to Muller Martini saddle stitcher feeder: - 0416.2067.2 Switch, 26 pcs. Original price: CHF 1082.00/pcs. Retail price: CHF 400.00/pc. - 0345.3222.2 Switch, 2 pcs. Original price: CHF 653.50/pc. Retail price: CHF 300.00/pc. - 0345.3216.2 Switch, 1 pc. Original price: CHF 848.25/pcs. Retail price: CHF 400.00/pc. - 0316.3206.2 Switch, 1 pc. Original price: CHF 768.00/pcs. Retail price: CHF 400.00/pc. - 0316.3208.2 Switch, 1 pc. Original price: CHF 800.00/pc. Sales price: CHF 400.00/pc.

Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

Size: 4.400 (2.750) x 1.200mm. - With Rubber wearplates (Metso Trellex SQ300) - 2 Pcs. Friedrich F2000-6-7.8 (5,6KW / 1.000RPM) Unbalance motors

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Size : 3.000 x 1.950mm. - With 2 Pcs. Friedrich unbalance motors of 2KW each. - Included: Frame with rubbers springs and springs

• Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, other sizes possible depending on format set • Output approx. 6000 bottles/h • with format for round bottles Ø 24 mm x length 52 mm • Feed hopper with lifting device, • aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) • 240V/50 Hz

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Aluminum chass ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

TECHNICAL DATA: 03 Reels Installed power: 0.6 kW

Round feeder for dosing difficult-to-flow materials, trough diameter: 950 mm, trough height: 800 mm, trough capacity: approx. 0.5 m³, plate diameter: 1,200 mm; discharge via 3-arm soil agitator with wall-mounted scraper and adjustable pusher / weir. Drive via SEW adjustable gear motor with 5.5 kW. Workshop overhauled in 2017 by Belgian specialist company, not used since then.

Manufacturer: Top Automazioni Model: ETL 10-65 Year of Manufacture: 2018 Machine Type : Automatic bar loader CE marked: Yes Technical data Maximum bar length: up to 3200 mm Weight: approx. 2500 kg Configuration and compatibility Originally installed on: Emco Maxxturn 65 Supplied as: Top Load version via Emco, manufacturer is Top Automazioni Included in sale: Bar loader including control unit Condition : The bar loader is in good, age-appropriate condition. No known damage. Fully functional before shutdown. Find more here - / Contact us at -

Inv. Num. : 8916 Type: Maxis 62N Producer: IEMCA Created: 2007 Parameters: Maximum rod length: 3485 mm Rod diameter: 9-62 mm Weight: 770 kg

Closure / feeding conveyor system Gassner Ferrero Year of manufacturing: 2000"

SKS PF5 Wire Feeder and FPM8i Component Package Manufacturer: SKS Welding Systems Device type: Wire feeder devices and system components Total quantity: 14 pieces PF5-LEA 10-2-9: 1 piece PF5-L 10-2-21: 2pcs PF5-R GFS 10-2-104: 1 piece PF5-L GFS 10-2-108: 3 pieces PF5-L 10-2-8: 5 pieces FPM8i 10-13-200: 2 pieces Design: Industrial MIG/MAG wire feeders Wire drive: 4-roller system Scope of delivery: Wire feeder devices according to the above parts list

SERVO - Bar loading magazine HATEC AM 90 -Diameter range 4 - 65mm -Length range 100 - 1270mm -Feed of the working head 1300mm -Total power requirement 1KW -Drive - SERVO Drive -Control - CNC -Max. bar weight 40Kg -Various feed rods -DOCUMENTATION Dimensions: LxWxH 1.6x1.1x1.3 meters / Weight 250Kg

Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 52 mm (on request new sewer parts € 1,500,-, approx. 4 weeks) - Material slide length LL - Centering - last attached to Gildemeister Twin 32 - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 52 mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, basic feed-in unit -Type: BUG622-28-54-E-000 -Number: 4x module available -Price: per piece -Dimensions: 300/100/H380 mm -Weight: 14 kg/piece

Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Feeder VSA 2048 L Wood Power Exhibition Machine-- Number of Feed Rollers: 4 - Feed Speed: 2 - 33 m/min- Speed Levels: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Radius max.: 1050 mm- Roller Diameter: 120 mm- Roller Width: 60 mm- Roller Travel: 20 mmDimensions and Weights: - Length (product) approx.: 1665 mm- Width/Depth (product) approx.: 220 mm- Height (product) approx.: 540 mm- Weight (net) approx.: 73.5 kg- Explanation Weight (net) approx.: including tripod Electrical data: -

Kalmeijer Feed Roller GearKalmeijer Feed Roller Gear NEWHer: KalmeijerType: Gear for Feed RollerCondition: New Gear (KGM):D These gears are part of the machine's drive train. They precisely transmit the power from the motor to the various rollers to ensure synchronized and uniform transport of the dough. Kalmeijer Pastry Machine KGMBhe KGM is a well-known type of machine in the food industry, especially in bakery and confectionery production.Kalmeijer Feed Roller (KGM):D ies is one of the conveyor rollers in the

Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

PTC relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Beckhoff, Digital Input Terminal -Type: KL1104 -Quantity: 4 pieces available -Price: per piece -Dimensions: 15/70/H100 mm -Weight: 0.1 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1408 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: EL1018 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M 090-31 -Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg