combi block used for sale

- Tape inserter - Standard Model

- Tape inserter - Standard Model

- Tape inserter - Standard Model

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

2G agenitor 406 CHP container, used, on behalf of a customer, with unit certificate Year of Make: 2013 Running Time: Approx. 30000 Bh Power: 250 kW electr. Delivery available for an extra charge

Fendt 5275 C combine harvester – modern and powerful harvester • Built in 2024 with only 449 operating hours • Very low drum wear (only 260 h) • Powerful 306 hp engine • Hydrostatic drive for comfortable working • All-wheel drive for optimum traction even in difficult conditions Cutting unit & harvesting: • Cutting unit 5.40 m working width • Incl. rapeseed equipment with hydraulic rapeseed separators left/right • Cutterbar car (Ziegler, 1-axle, built in 2024) • Reel horizontally adjustable • Autocontour for optimal ground tracking Equipment: • On-board computer & flow control • Hectare counter • Air conditioning for comfortable working • Pendulum compensation • Reversing device • Rotating beacon • Straw choppers • Chaff Distributor • Loss measurement Tyres: • Front: 650/75 R32 (approx. 80% ...

John Deere T550 combine harvester – reliable and powerful harvester • Built in 2019 with only 1,179 operating hours • Very low drum hours (621 h) • Powerful 305 hp engine • Hydrostatic drive Cutting unit & harvesting: • Cutting unit 6.70 m working width • Incl. cutting unit trolley (Zürn) • Mechanical rapeseed blades • Autocontour for optimal ground tracking Equipment: • GreenStar 2630 display • AutoTrac preparation (GPS ready) • Yield measurement & throughput control • On-board computer & hectare counter • Air conditioning • Pendulum compensation • Reversing device • Straw choppers & chaff spreaders Technology & Comfort: • XtraFast emptying system • Electrically adjustable screen box • Two-stage threshing drum drive • Laser sweeping control • LED lighting package • Com ...

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Combined sheet metal processing machine with: - Bending, tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm. - Rolls, roller diameter 42mm - Scissors, max. 1015 x 1mm Material width 1015 mm Material thickness 1 mm Speed by hand Weight 0.25 t Dimensions L x W x H 1.4 x 0.6 x 0.75 m Condition: never used / new (5) Auction-ID: A7-46642-65

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5) Auction-ID: A7-46642-113

Profile steel shears combined: - Footswitch - Length stop Round steel 30 mm Square steel 28 mm Angle steel 90 x 8 mm Flat bar 150 x 8 mm Pressure capacity 35 t Total power requirement 2.8 kW Machine weight approx. 0.5 t Space requirement approx. 0.75 x 1.0 x 1.5 m Condition: unchecked (6) Auction-ID: A7-46642-47

Model: Sartorius Combics 1 (CWP1P1-60IG-LCE) Type: Industrial Platform Scale with Display Weighing range: up to 60 kg Readability: 1 g Platform size: approx. 400 × 300 mm Material: Stainless Steel Display, Platform Powder Coated Protection class: IP44 (optional IP69K) Features: Automatic buoyancy Checkweighing, Percentage Weighing, Totalization Interfaces: RS232 as standard, optional RS485, Profibus-DP, Ethernet TCP/IP Legal-for-trade according to OIML Special features: Hygienic design, easy to clean, suitable for GMP/ISO environments Auction-ID: A1-46686-1044

Power supply: 400V; Power: 19 kW; Capacity: 10 trays; Water pressure: 1.5-4 bar; Electronic control with programs The convection oven is a professional, high-capacity appliance designed for restaurants, hotels, canteens, catering companies and large culinary shops. Its main purpose is to simultaneously, quickly and evenly cook large quantities of food by combining hot air (convection) and steam. Transport defect - the door does not close Auction-ID: A7-46794-14

Machine number: FG3721 for all other technical data see photographed nameplate Auction-ID: A7-46287-154

Serial number 531B093 for maximum material cross-sections see photographed nameplate incl. punching tools as shown in the pictures with length stop max. stop length approx. 2000 mm Reference: Prologtec Lot 1 Auction-ID: A7-46763-125

Manufacturing number: 75-8771 Max. grinding wheel diameter: approx. 250 mm Max. sanding belt width: approx. 40 mm Auction-ID: A7-46287-11

Serial number: M275930 Power: 7.7 kW Current: 19 A Voltage: 400 V Frequency: 50 Hz Speed: 2820 rpm Max. machining length: 6000 mm Reference: Groven - Lot 19 Auction-ID: A7-46763-316

Belt width: 65 mm incl. whetstone, diameter: 110 mm Auction-ID: A7-46287-69

Belt width: 400 mm, Description: With adjustable take-over outfeed conveyor, Filling capacity: 27 litres, Power: 3 x 400V, 50Hz, 0.7kW, Dimensions: 2860 x 750 x 1450 mm, Weight: 390 kg

well functioning, equipped with: pin 35mm tension, mechanical support leg, control box, stabbing pick-up, Trelleborg 600/55-26.5 tires, foil wrapper, output with support wheel, LED lighting, lubrication system, Auction-ID: A1-40139-34

COMBISAFE fall protection, Overall length 107.1m, unassembled, consisting of: 51 pieces of steel mesh L=2.30m (for span length 2.10m), as in item number 3203 with different length 52 pieces of posts 2000, article number 2000 52 pieces screw base M12, item number 1212 SO001380 Auction-ID: A1-46973-207

Technical details Manufacturer: Walter Model: WDPP 410 KBA Type: Combined slab recovery circular saw / multi-blade edging saw Year: 2023 Motor power: - 2 × 6.5 kW vertical motors - 2 × 20 kW horizontal motors Configuration: - Extended 4 m cutting version - Multi-blade saw arrangement Vertical saw blades: Ø 500 mm Horizontal saw blades: Ø 350–425 mm Number of saw blades: Typically 6 blades (KBA version) Dimensions: - Width: 2000 mm - Length: 9900 mm - Height: Approx. 1200–1400 mm Weight: 2400 kg Application: Slab recovery, edging, and multi-blade wood cutting operations Condition: Used Auction-ID: A7-40554-7

For sale is a set of COMBISAFE fall protection, Overall length 33.6m, unassembled, consisting of: 16 pieces of steel mesh L=2.30m (for span length 2.10m), as in item number 3203 with different length 17 pieces of posts 2000, article number 2000 17 Comisafe combi clamps, item number 1500 SO001378 Auction-ID: A1-46973-205

Combisafe Plastic Recess Tubes, Recess Sleeve, Bar Goods, for cutting, consisting of: 120 yellow plastic tubes PP-HM 54 x 2mm, length 2.40m 22 yellow plastic pipes without further description, apparently with the same dimension, length 3m Factory number: 1255 (Accessories for Combisafe prefabricated ceiling fastening item no.: 1231) SO001365 Auction-ID: A1-46973-203

COMBISAFE Fall Protection Set, Overall length 71.4m, unassembled, consisting of: 34 pieces of steel mesh L=2.30m (for span length 2.10m), as in item number 3203 with different length 35 pieces of posts 2000, article number 2000 35 pieces screw base M12, article number 1212 SO001379 Auction-ID: A1-46973-206

Technical details Manufacturer: Eloma Model: Genius T 10-11 Type: Commercial combi steam oven Year: 2011 Serial numbers: EL0503056 / EL106520 Capacity: 10 × GN 1/1 trays Power: 17.0 kW Voltage: 3N AC 400 V / 50 Hz Water pressure: 200–600 kPa Maximum water temperature: 50 °C Protection class: IPX5 Configuration: - Programmable Genius control panel - Multi-rack tray support system - Stainless steel cooking chamber - Steam and convection cooking functions Application: - Restaurants - Hotels - Institutional kitchens - Bakery production - Catering operations - Supermarket hot-food preparation Dimensions: - Length: Approx. 950 mm - Width: Approx. 900 mm - Height: Approx. 1250 mm Weight: Approx. 180 kg Condition: Used, fair to good commercial condition Observed condition: - Door glass intact - Rack rails complete - Moderate internal mineral/water scaling - ...

Syringe Storage- 2252 Manufacturer: Sybermat Model: 14x17 combing machine Year: 2009 Serial Number: 3460 Simatic Panel SIEMENS Syringe infeed conveyor Two syringe distribution stations Air pressure: 6 bar Power: 2x240V + PE, 25A Overall dimensions (W x D x H): approx. 1400x1200x2100mm Auction-ID: A1-47051-1

Massey Ferguson Centora 7282 – 2005 combine harvester equipped with Massey Ferguson 25 FT cutterbar with transport trolley and rapeseed side cut; High-performance and comfortable agricultural machine, ideal for grain farms looking for a reliable machine with a high harvesting capacity. Auction-ID: A3-43539-38077

Very nice Massey Ferguson Centora 7280 AL combine harvester from 2009, in good general condition and ready to work. Machine equipped with a 25 FT cutter bar with transport trolley and a rapeseed side cut. Clean, complete and well maintained set. Auction-ID: A3-43539-38078

By Holex/epb et al. Auction-ID: A7-47109-68

Works perfectly Coach Long trolley Cutting length 127cm Presser Leitz tools Auction-ID: A3-43538-36011

This concerns an unused product, consisting of article number: WP0803, Combination spanner set 10-19 m / suspension MI X-pert, Auction-ID: A1-45624-18

This concerns an unused product, consisting of article number: WP0803, Combination spanner set 10-19 m / suspension MI X-pert, Auction-ID: A1-45624-167

Sold with stainless steel storage cabinet. Auction-ID: A1-47151-12

Sofa height 42cm; height 75.5cm; room for 8 people; Demo table for transport Composition of two tables, see also lots 110 and 111. Auction-ID: A1-40114-112

Lot of 101-132, 300-311, 1005, 1114-1122 Dimensions in cm; Dimensions per Cargo Scooter; All data, as well as all descriptions, can be found in the respective lots; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not assume any warranty for the condition and functionality of the lot; Auction-ID: A1-47184-1

Sofa height 42cm; height 75.5cm; room for 8 people; Demo table for transport Auction-ID: A1-40114-111

Sofa height 42cm; height 75.5cm; room for 8 people; Demo table for transport Auction-ID: A1-40114-110

Massey Ferguson MF30 combine harvester from 1998, produced by Dronningborg Industries A/S, equipped with cab, GPS system, mechanical gearbox and walker threshing system. Motor power 114 kW, max. speed 15 km/h, reading hours 2359, tyres front 30.5 LR 32 and rear 400/60-26.5, own weight 1700 kg, dimensions 6000 × 2500 mm, serial number 55161, registration TFR-84-Z. Auction-ID: A1-40140-21

Equipped with: Drawer for keeping warm, Gaggenau BS275110E / type HLBS27 luxury built-in combi-steam oven with 220-240V / 50Hz connection, oven power 2900W, motor powers 36W and 28W, lighting 60W, FD 9109 Auction-ID: A1-40114-96

John Deere CTS Combine Harvester Complete with a JD 922 header with trailer Year of construction 2000 Engine hours 3018 Drum hours 1536 2WD 25 km/h Air conditioning 5.20 meter unloading auger Shredder chaff spreader Mechanical deflector 710/75R34 front tyres 440/80R28 rear tyres John Deere 922 header (Year of manufacture 2000) with Zürn rapeseed attachment (BJ2007) including Brun's trailer. Auction-ID: A1-40140-70

This is a combination of lots 12 and 13 consisting of 2019 \"Soest\" RC-400 rolling machine and \"Soest\" VP-2-400 polishing and brushing machine Auction-ID: A1-44305-14

Concerns a combination of lots 1 and 2 \"ETA\" eHACK 170 EP Biomass boiler and 60m3 wood tension silo Auction-ID: A1-44305-3

engine hours: 3878 hours, cage hours: 2853 hours, equipped with: John Deere 625R header (working width 7500mm, year of construction 2009, 2190kg), loss monitor, yield measurement, moisture measurement, four-wheel drive, air conditioning, electric screen adjustment, John deere 9 liter diesel engine, chaff spreader, forage harvester, 5 meter discharge pipe, GreenStar ready, Dutch license plate registration Auction-ID: A1-40140-1

Concerns a combination of lots 6 and 7 gluing installation and glue press installation Auction-ID: A1-44305-8

Tiltrotaqtor combination TR-K90 fully hydraulic Lehnhoff VL80; suitable for a Kubota KX080/KX085 Auction-ID: A7-47086-121

Contents: Assortment of various parts, tools and accessories Including Garant drawer cabinet + shelf Auction-ID: A7-46939-7

in working condition. tested for function. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-55

Total 4.5Kw; on mobile chassis. The Hot Naboo / HOEN072. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-1

Total 4.5Kw; on mobile chassis. The Hot Naboo / HOEN072. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-2