combi bloc used for sale

RECON Part number: 1216 2655 / 2656 of 1216 Engine number: 232.12.02144 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height 330 mm max min 80 mm Infeed height 890 mm max min 860 mm Speed max 900 Pack. / h

RECON Part number: 1216 3892 Engine number: 234.12.03352 Std. size ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON ID: 28679 Year of construction: 1974 Power: 530PS / RPM 1050 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 1216 3891 Engine number: 2200988 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Part number: 1230 0506 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

; ready for operation

-Die BBS 550 ist ideal zum Schneiden von weichem, hartem, trockenem oder gefrorenem Holz bzw. Holz-Prismen  mit einer Länge entsprechend der Maschinenkonstruktion. -Die max. Schnittlänge ist abhängig von den Verlängerungselementen -Alle Holzarten können mit dem gleichen Sägeband geschnitten werden. -Robuste und schwingungsfreie Konstruktion -Minimaler Wartungsaufwand -Einfache Bedienung Massive Präzisionsgusslaufräder -Präzisionsführungen -Excenterspanner -Vorschneiderschwenkmechanik -Manuelle Schnitthöheneinstellung -Manueller Vorschub -Geliefert mit 4,6 m Rollbahn Technische Daten: - max. Stammdurchmesser: 550 mm - max. Brettbreite: 530 mm - max. Sägebandhub: 20 mm - max. Schnitttiefe: 220 mm - Schnittlänge Grundversion: 3,7 m - Verlängerungssektion: 2,3 m - max. Schnittlänge: unlimitiert - min. Schnnittlänge: 0,9 m - Motorleistung Antriebsrad S1 (100%) / S6: 4 kW / 5, ...

; ready for operation

Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

RECON -MN30101 -2.1111-100 -Basic camp lane standard -930KW/900U/min -1.13.3-1111-00.03 GGG50 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Pn. 1213 3885 #604.16.010139 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

4 pieces same batteries 24 V

RECON Part number: 0422 7127 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Used but reconditionable #25442 Used: 750€ Recon: 3800€ ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Used Machine

Technische Daten: Technische Daten - Vorschub + Auf / Ab - Sägekopf elektrisch regelbar - 2-teiliger Grundrahmen - Bedienersitz - Wenderollen - Stammspanner - zusätzliche Stammauflagen - Sichtlineal - Kreisskala - mechan. manuell verstellbare Sägeblattführung - max. Stammdurchmesser 1100 mm - max. Schnittlänge 11 m - Hauptmotor 10 kW - Vorschubmotor 0,55 / 1,05 kW - Hubmotor 1,1 kW - Sägeband L= 4010 bis 4140 mm, B=30 bis 35 mm - Vorschubgeschwindigkeiten: 1. Stufe: 2,2 bis 4,5 m / min 2. Stufe: 4,5 bis 9,0 m / min 3. Stufe: 7,0 bis 9,0 m / min 4. Stufe: 14,0 bis 28,0 m / min - Gesamtgewicht ca. 1250 kg - Abmessungen L=13,0 m x B=2,05 m x H=1,35 m

Technische Daten: - Vorschub + Auf / Ab - Sägekopf elektrisch regelbar - 2-teiliger Grundrahmen - Bedienersitz - Wenderollen - Stammspanner - zusätzliche Stammauflagen - Sichtlineal - Kreisskala - mechan. manuell verstellbare Sägeblattführung - max. Stammdurchmesser 800 mm - max. Schnittlänge 11 m - Hauptmotor 10 kW - Vorschubmotor 0,55 / 1,05 kW - Hubmotor 1,1 kW - Sägeband L= 4010 bis 4140 mm, B=30 bis 35 mm -Vorschubgeschwindigkeiten: 1. Stufe: 2,2 bis 4,5 m / min 2. Stufe: 4,5 bis 9,0 m / min 3. Stufe: 7,0 bis 9,0 m / min 4. Stufe: 14,0 bis 28,0 m / min - Gesamtgewicht ca. 1250 kg - Abmessungen L=13,0 m x B=2,05 m x H=1,35 m

Technische Daten: - Kapazität 2-6m3 / h - Schnitthöhe ca. 250 mm - hydraulische Bandspannung - Bandgeschwindigkeit 10, 11, 12 m/min. - Sägemotor 7,5 kW / 400 V / 50 Hz - Vorschubmotor 0,75 kW / 400 V / 50 Hz - Sägebandlänge 4250 mm - Sägebandbreite 35 - 40 mm - Länge mit Tischen 2800 mm - Breite 1150 mm - Gewicht 430 kg Inclusive: - Speichenräder für Bandbreite 60 mm - stufenlos einstellbarer Vorschub - Rollentisch im Ein- und Auslauf

COEX adapters for wide-slit nozzle up to 5 layers are possible with an appropriate module

Schmedt Praecoll; good condition; 2.glue basin; Block width 110-450mm; Block height up to 345mm; Blockstaerke up to 82mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Mak 6M20 Block Very Good Condition for sale

Blocking unit Built in 1999; working condition

Stainless steel cooking line Kitchen Cup block kuechenline; Stainless steel cooking line Kitchen line Kitchen block Kitchen line 4-flame stainless steel Gas stove with oven stainless steel countertop Spuele with single-lever mixing battery 5 x shelf 1 x drawer 1 x 230V socket Stainless steel socket mass approx. (HxBxT)68x265x65cm Component of this auction is one of the two picture shipping costs, please ask us. Other items can be found in our shop.

For sale a motor block of 442 KW Deutz TBG604BV8 gas CHP generator. The crank shaft we can offer also. FCA Free charged on your truck.

Yanmar 6N18AL

Block vane pump DK200 Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: DK200 Rated motor power: 5,5KW Nominal: 200m ³/h Final pressure without GASB.: small 5x10e-3 Accessories: operating instructions spare parts list Delivery: in the short term; ready for operation

With PRO 500 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with PRO series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

SOS block bottom bag machine 1 ply photo cell for preprinted paper 4 colour tail end printer Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm

SOS Block bottom bag machine 2 plies photo cell for preprinted paper 4 colour tail end printer bottom patch and 1 colour tail end printer for bottom patch Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Used concrete block making machine Fabr. Henke / Masa with core and attachment Board size 1400 x 1050 mm stroke head countersunk head vehicle group packaging strapping Chambers in a diverse Formen.Mischanlage is complex, ZementsilosDie now can a ready state, but also to the present Site be continued. For more information, 0171 6232061 or via MailLonz - measuring and RegeltechnikBrunnenstrasse 22 65510 Idstein

Now available: MaK M25 6 cylinder engine block in stock and ready to be sold. Ask us for more information and prices.

RECON Part number: 1216 1230 Main bearing standard dimensions New camshaft bearings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)

Block glue press Müro 5000/A3 TM; good condition; cleaned and tested; Table equipment; Format A3; Stack increase. Padding press Müro 5000/A3 TM; good condition; cleaned and checked; table top machine; size A3; Pile elevation.

2 plies, 4 colours Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

Working Sizes: 1300 x 3500 mm

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

Very Good Condition Wartsila V32 Block for Sale

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Producer : Fischer & Krecke Type Combi 43 BB year: 1993 Bag width : 100 - 280 mm. Cut-off length : 280 - 580 mm. Bottom width : 50 - 180 mm. Mechanical speed : 250 bags / min. 2 unwinds for 2 ply bags With 2 flexo printing unit (or 3 units with 1 ply bag) notch cut unit

Producer : Fischer & Krecke Type Combi 31 BB year: 1980 Bag width 120 – 260 mm. Cut-off length 250 – 460 mm. Bottom width 45 – 120 mm. Mechanical speed : 250 bags / min. 2 unwinds for 2 ply bags With 1 flexo printing unit (or 2 units with 1 ply bag) notch cut unit

Corpus press (used) Press for assembly of hulls (b/u) Good quality In good condition Pressurized area of the 800x570 mm Pneumatic cylinders: Number of pneumatic cylinders: 4 Step between stating hole: Distance between fixing holes: 50 mm Compressed air pressure Compressed Air 8 bar Transport dimensions Transport Sizes 1950x600x1150mm Weigh Weight 350Kg

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Recon Cylinder block ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon Part number: 0208 9102 Old engine number: #7300402 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. --------------------------------------------------------------------- If you have any further questions, please do not hesitate to contact us!

Manufacturer: EDUR Type: NUBS 700 6148L Built: 2015 Condition: looks good, overhauled Weight: 132 kg Volume flow: 98 m3/h Power: 7 kW Speed: 2900 rpm Operating pressure: 10 bar Head: 18 m