132,141 used machines on RESALE, but how to find them? Machine Search
EAGLE eVision 1530 F4.0 4kW fiber laser was built in 2016 in Poland. The machine has been maintained and upgraded on an ongoing basis throughout its service life. In 2021, the cutting head and modules in the laser source were replaced. The laser cutting machine is designed for machining sheet metal made of, among others, stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDS ...
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts
MALMEDIE DIE Adjustable drawing speed with inverter • Minimum worked diameter 15 mm • Maximum worked diameter 25 mm • External dimension coils 1,250-1,300 mm • Internal dimension coils 800-900 mm • Length 700-1,300 mm • Weight 1.500 Kgs • Wire surface treatment bonderized with soaped • Tensile resistance approx 500 N/mm2 The drawing machine normally work the raw material over mentioned with the follow specification: • Number of drawing passage 1 • Drawing die sizes 120x45 mm • Lubricant now used oil • Max area reduction 6 to 8 % • Drawing speed adjustable with inverter
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 160 mm -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg
- 6 bottle lines - WITHOUT OZONE GENERATOR - Machine in working order - Machine available immediately - Video available on request
: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate, straightening bench ... -Number: 1 prism available -Dimensions: 100/120/H60 mm -Weight: 5 kg
electric motor, three-phase motor -Power: 0.37 kW -Speed: 2730 rpm -Shaft: Ø 12 x 35 mm -Design: B5 -Protection class: IP 54 -Dimensions: 275/165/H220 mm -Weight: 7.4 kg
Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.
Key data: 1 t
Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. ...
Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 1,6 scope of de ...
electric motor, three-phase motor -Power: 1.1 kW -Speed: 2845 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 55 -Quantity: 1x available -Price: per piece -Dimensions: 275/156/H195 mm -Weight: 9.6 kg
Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...
From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax
Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 385/276/H250 mm -Weight: 32 kg
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 50 mm Truss Type: TRV1-290-125-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,200 kg, with the same weight Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on th ...
USED TETRA PAK A3 FLEX 1000ML PRISMA FILLING LINE FOR SALE Item #: Usm-193 Category Tetra Pak A3 CF/Flex A3 Flex 250ml Slim and 1000ml Prisma Filling Line For Sale A3 Flex 250ml Slim filling machine with 1000ml Prisma Volume change kit, Version 100v, Speed 7000 PPH Straw applicator TSA 21 Cap applicator 45 for stream cap Tetra Pak packer TCBP 70 Tetra Film wrapper 67 eady ride and conveyors paper trolly Condition: Good
Radial piston motor, hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 34 mm -Flange: Ø 180 mm - Universally applicable: -Number: 1x motor available -Price: per piece -Dimensions: Ø 205/258 mm -Weight: 23 kg/piece
Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg
Kemper Spiral Kneader Type: SP 125 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...
BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)
Three-phase motor, electric motor -Power: 2.5 kW -Speed: 920 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 460/330/H260 mm -Weight: 45 kg
clamping plate, welding table, welding table, surface plate -Clamping plate: is steel -Width: 1000 mm -Length: 1000 mm -Height: 820 mm -Plate thickness: 50 mm -Plate is on: steel frame -Quantity: 1 piece available -Transport dimensions: 1000/1000/H820 mm -Weight: 466 kg
radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.37 kW -Speed: 2800 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 190 mm -Outlet connection: Ø 190 mm -Impeller: Ø mm -Dimensions: 700/580/H560 mm -Weight: 37 kg
Alcolor Vario continuous dampening Autoplate (semi automatic plate loader) Ink unit temperature control (Technotrans Beta C) Cooling and recirculation Impression-cylinder washing device - automatic Ink-roller washing device - automatic Blanket washing device - automatic Non-stop feeder Powder sprayer (WEKO AP 110) Preset Plus feeder Prinect Press Center AirStar Pro - Central air supply cabinet Prinect Easy Control - Color Measurement
Stick electrodes 2.5 x 250 -Type: Phoenix 120K -Price: per package -Number: 16 packages available -Weight per package: 3.3 kg
Blume roller conveyor continuous weighing scale 1880-910-600 RA2046 Make: Blume Roller width (RB): 600 mm, Steel rolls Nominal/outer width (NB): 910 mm length: 1880 mm Rolls diameter: 50 mm Roller distance 80 mm Overall height: 900 mm 3x 24V Interroll drum motors Conveyor speed: freely adjustable with frequency converter between 0.22 and 0.65 m/s maximal load: 220 kg Electronics: 4x load cell: Interface, MB-150-38 ML-1106B Scope of delivery: with supports, USB converter Optionally available: Side guides on one-sided or both sides Other measuring device e.g. Metler Toledo IND400 Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2012 Electric data: 24V Interroll, 220-240 condition: very good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 910 Roll width in mm: 600 Roll division in mm: 80 Driven: YES scope of ...
Stick electrodes, welding electrodes 4.0 x 350 -Type: SL 19 G -AWS: A5.5-96:E8018-B2-H4 -Price: per package -Number: 5 packages available -Weight per package: 4.8 kg
V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg
Quick-change tool post, tool post head, quick-change tool post -Mounting dimensions: 112 mm -Number: 5x steel holders available -Price: per piece -Dimensions: 160/55/H170 mm -Weight: 3.7 kg/piece
Used candle filter - sanitary made by Cerfiltr type FHC - STC - 12SF30T80. New 2021. The filter is used for water sterilisation. Plus a set of cartridges (extra charge). Little used.
Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters
Used pipetting robot Tecan EVO 150 with Tecan dongle and CDs and accessories .
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 120 mm -Admission: -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg
Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -2x prisms: as a set -Price: for one set -Dimensions: 130/75/H150 mm -Weight: 10 kg
Polishing bench, grinding machine, polishing bench, double grinding bench, double grinding machine, pedestal grinding machine, pedestal grinding bench -Drive: 2.2 kW -Speed: 1420 rpm -Assembled brush: 150 mm -Dimensions: 700/800/H1300 mm -Weight: 73 kg
Nakamura WTS 150 Y2 Bar Lathe :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 16i - T Main Spindle Nose: ASA 5 Main spindle power: 7.5Kw Main spindle bar clearance: 42mm Turning diameter: 310mm Turning Length: 255mm Main spindle speed: 6000 Number of Tool Turrets: 3 Number of first turret tool slots: 12 Number of first turret motors: 12 First Turret X-Axis Travel: 207.5mm First Turret Y-Axis Travel: +-30mm First Turret Z-Axis Travel: 300mm Number of second turret tool slots: 12 Number of second turret motors: 12 Second Turret X-Axis Travel: 207.5mm Second Turret Y-Axis Travel: +- 30mm Second Turret Z-Axis Travel: 300mm Number of third turret tool slots: 12 Number of third turret motors: 12 Third Turret X-Axis Travel: 207.5mm Third Turret Z-Axis Travel: 800mm Rapid feeds for linear axes X Y Z: 40m/min High refr ...
1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 90 mm -Dimensions: 105/110/H68 mm -Weight: 3.1 kg
1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders
Turntable Bausch + Ströbele further information on request
Key data: 6 mm
Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW
The scope of delivery includes: 01x Locking bracket, used Material colour: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "W" approx. 63 mm Bearing surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2,330 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm -6 set: clamping jaws -Weight: 17.5 kg
maximum number of results exceeded
please refine your search
