combi 1 used for sale

; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344

Approved for HVO use; Gross weight [kg]: 1490; Engine: Rehlko KD39L04T-AA56; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: cooland heater and battery charger; Water Tank Volume [l]: 181

Bosch DMA 140D 301-D, 1070077623-216 Technical data: 670V-705V140A max. Version: V.0.019 Original price: 13554,-€ Item condition: Used, in perfect condition More products of this category can be found in our extensive EBAY assortment. More plug-in cards - new and used - can be found in our shop! International shipping costs on request! Plug-in cards and other products buy cheap - Here you buy goods from the professional for the professional - In our SHOP you will find more attractive offers

; Gross weight [kg]: 510; Engine: Rehlko KDW1404; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 50

; Gross weight [kg]: 14280; Engine: Cummins KTA38-G5; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1200

Shaft grinding machine with belt grinding attachment Specifications: - Flexible shaft 1500 mm - 5 speeds - Belt grinding attachment - Drive 380 V - mobile underframe - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg

pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!

Technical data for the wide-span rack beam: Shelving system: Jung Heinrich Type: G The scope of delivery includes: 01x Wide-span shelving beam, used Material colour: RAL 1007 yellow Z-profile: 50 x 30 mm Agraffe: 3 HK (hook) clear width: 2,145 mm 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...

Size: 0x0

; Gross weight [kg]: 1055; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 87

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

; Gross weight [kg]: 1102; Engine: Cummins 4BT3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 1072; Engine: Cummins 4B3.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Used shredder / shredder from Moco type AZ 17E/1210. Shredder MOCO AZ 17E, shredder with slow and quiet toothed working shafts. Low vibration and minimal maintenance, compact Robust welded structure, low power consumption, Individually interchangeable cutting discs. Very good inlet behavior, even for large bodies. High degree of fineness. The material is stopped by an optional sieve inside the cutting chamber for repeated shredding until its dimensions are smaller than the sieve openings. The control of the AC gear motors is equipped with an automatic overload-dependent reverse adjustment. BANDWIDTH EXAMPLE 15 to 18 cubic meters of loose mixed waste per hour. DIMENSIONS • Cutting section 932x912mm • External dimensions 2440x1112x730mm • Weight 4600 kg. • Drive power 2×15 kW • Voltage 400V/50Hz Year of manufacture 2010.

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

; Gross weight [kg]: 1215; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120

SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg

1100T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 1,100 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guide: 4 column guides (Ø 150 mm) Clear width between the uprights: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 1,000 mm Total height  ...

Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

dimensions 820x540x70 capacity 1 to daylight 2337 mm

HADEF crane bridge 3.2 to, 19 m wide, 18m crane runway crane Overhead crane / gantry crane / overhead crane,5 m high, DONGES bridge 19 m wide, full working, German Crane, Year 2003 - Crane already dismantled, chassis can still be dismantled - free loading

Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

COMPLETE TETRA PAK TPA/21-1000 SQUARE LINE, MANUF. IN 2001, CONSISTS: - TPA/21-1000 FILLER, V50, ONLY 14.000 RUNNING HOURS, INCLUDES A NITROGEN INJECTION STATION, - TCA/88 APPLICATOR - TCBP/70 WRAP AROUND PACKER, - CONVEYORS SYSTEM. CONVEYORS. EXCELLENT CONDITION WE PROVIDE DISMANTLING, INSTALLATION AND START UP SERVICE.

Vibro discharge tray DAXNER VAB 1200 0.525 kw power Spout ø 120 mm Counter flange

capacity 250 Kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: 150 mm -Dimensions: 425/240/H120 mm -Weight: 40 kg

Paint pouring machine, paint pouring machine, paint pouring station, paint pump, emulsion pump, dosing pump -Gearbox: Stöber Type R27-0000-110-4 -Speed: 800 - 1820 rpm -Engine: HEW type EEXF-S/4 -Power: 1.1 kW -Dimensions: 300/400/H935mm -Weight: 43kg

Sigmatek CDI 163 C-DIAS digital bus module input module. Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg

Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS/1AC/12DC/5 Ord.No.: 2866475 -Input: 100-240 V -Output: 12 V -Cardboard dimensions: 185/175/H50 mm -Weight: 0.6 kg

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

Pneumatic cylinder, flat cylinder, pneumatic drive, stamp, flat cylinder -Stroke: 1070 mm -Piston rod: Ø 20 mm -Pneumatic damping: adjustable on both sides -Price: per piece -Number: 2 pieces -Dimensions: 1250/100/H45 mm -Weight: 7.4 kg/piece

Vibro discharge tray Bosche BVA 1800/30, EX, No. 07-6711-02.22.2, 0.8 kw at 1500 rpm Discharge approx. ø 370 mm Installation height height approx. 850 mm Outlet valve pneumatic 24V Very good condition 4 piece(s) in stock and immediately available

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Technical data of the used Equiptop ESG-1228ASD Tangential Rectification: Magnetic plane: 712 x 330 mm Automatic working stroke: 760 mm (manual 830 mm) Grinding wheel diameter: 355 mm Grinding wheel thickness: 50 mm Engine: 7 1/2 hP Automatic diamond maker Increased working height CE certified; Year: 2000 Machine in excellent condition, CE certified.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table, turning table -Table area: approx. 1550 x 420 mm -Grooves: 5 piece 16 mm -Dimensions: see photo -Total dimensions: 1630/420/H180 mm -Weight 461 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 185 mm -Piston rod: Ø 20 mm / thread Ø20 x 178 mm -Cylinder: outside Ø 65 mm -Dimensions: 470/110/65 mm -Weight: 4.4 kg

Aerospace telephone system, radio network -Manufacturer: Cisco, Aironet BR1310 -Type: AIR-BR1310G-E-K9-R -Dimensions: 205/205/H80 mm -Weight 1.1 kg

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Bores: Ø 18/20 mm, see photos -Number: 2x angles available -Price: per piece -Dimensions: 165/140/H245 mm -Weight: 13.1 kg

Technical data for the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet racking stand, used Material color: sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) Height: 9,650 mm Depth: 1,100 mm General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter -Manufacturer: Landis & Staefa -Type: RAM142.0/1982 -Dimensions: 185/95/H80 mm -Weight: 0.3 kg