combi 1 used for sale

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2765x2520x1730 mm Weight: 3600 kg Total power requirement: 55 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a wide belt grinding machine SCM Sandya 16 S 110, built in 2012. Configuration: 18.5 KW hard-rubber grinding cylinder 15 KW hard-rubber grinding cylinder 11 KW combi unit soft-rubber cylinder + pneumatic shoe. Working width 1100mm. Pressure rollers for short elements. Compressed air Clean for all units. Weight 2750kg 3 motors 18,5 + 15 + 11kW Incl. full documentation. Condition AS NEW ! The machine did very little work. Available the same.

Dimensions (L/W/H): 2200x2000x1950 mm Weight: 700 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2150 mm Weight: 7500 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

Dimensions (L/W/H): 2950x1550x2950 mm Weight: 4000 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.

Dimensions (L/W/H): 5800x2250x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mm Weight: 7900 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2800 KW

ANNOUNCEMENT – WAUKESHA 16V AT27GL ENGINES & KATO GENERATORS FOR SALE Available for sale: three Waukesha 16V AT27GL natural gas engines, plus three KATO 3606LVA generators and Aalborg AV-4 heat-recovery boilers. These units offer proven durability and efficiency, ideal for power generation and industrial applications. Waukesha 16V AT27GL Engines – Key Information Engine 1 – Serial C-94476/1 Hour Meter: 79,928 h Maintenance: 36K Plus at 52,000 h (2021) and 8K (2025) Pending: 72K Status: Operational Turbochargers: 12K service (2025) Engine 2 – Serial C-94534/1 Hour Meter: 84,152 h Maintenance: 8K (2025) Pending: 72K + main gas valve replacement Turbochargers: require 50K overhaul Status: Operational Engine 3 – Serial C-94476/2 Hour Meter: 67,122 h Maintenance: 72K at 66,000 h (2024) Pending: liner replacement + main gas v ...

Key data: 2000 KW, 1500 1/min

Brand New Containerised MTU 16V4000L64FNER Natural Gas Generator Sets Brand new MTU 16V4000L64FNER containerised natural gas generator sets are available. This high-efficiency, low-emission MTU Series 4000 power modules deliver dependable performance for continuous, prime, or standby operation across industrial, commercial, and CHP (Combined Heat and Power) applications. Each unit is factory-assembled and tested in a 40ft ISO High Cube container, integrating the engine, alternator, cooling, ventilation, exhaust, and control systems—ensuring rapid installation and plug-and-play operation and can be delivered anywhere through road, sea or railway transportation. Key Specifications & Features Engine: MTU 16V4000L64FNER, 4-stroke, V16 lean-burn natural gas engine Power Output: Up to 2800 kVA Container Design: Weatherproof, sound-attenuated 40ft High Cube I ...

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Synchronous motor, MAC117D-0-FS-4-C/130-B-1/WI522LV, R911232504, Rexroth, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The synchronous motor was completely reconditioned by Bosch Rexroth and is therefore in mint condition. - Synchronous motor, permanent magnet motor - 600 V / 3 pol. - 4000 rpm - 23 Nm - 53,2 A - 29 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions.

Impressions=138 m, Condition= Very Good , Availability= 2025-12-17, Autoplate Alcolor dampening Technotrans cooling and refrigeration Ink Temperature Control Technotrans IR/TL dryer CPC1-04 ink remote control Perfecting 5/0,1/4, 2/3 Grafix Powder device Top technical and mechanical condition

Code: 0266 Brand: ROBOPAC Model: ROTOPLAT 106/FRD - CE Standard Stretch wrapping machine with rotary table for wrapping pallets, boxes, cabinets and various materials various materials, various sectors such as food, beverages, detergents, chemicals, construction, furniture, logistics and various - CE Standard With loading ramp Rotating table diameter mm 1650 Film tension adjustment Load capacity 2000 kg Rotating plate diameter mm 1650 Clutched reel carriage FRG Table rotation speed rpm 5/12 Height mm 2100 Ascent/descent cycle Ascent/descent cycle only Power supply volt 220/50 Total power Kw 1,4 Overall dimensions: mm 1650 x 2600 x2700 h Weight kg 450

Spindle drive, Simotics, 1PH8103-1MG02-0BG1-ZNO.YF, Siemens, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Siemens and is therefore in a mint condition. - Asynchronous motor, spindle drive - Power: 7,5 KW - 380V / 3 pol. - max. 9000 rpm - max. 77 Nm - max. 42 A - 47 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

2012 Muratec MW 120 GT Metal 2012 Muratec MW 120 GT and more: Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes

Process air cooler/chiller/chiller, air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 1002 P3-20-OFF – 200 kW TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump (pump on the intake side miontized) and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Prote ...

Process air cooler/chiller/chiller, air-cooled, Type: TAEevo Tech 1002 P3-20-OFF – 200 kW Manufacturer: MTA S.p.A. TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump (pump on the intake side miontized) and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Prote ...

Available in stock 1 x Used Azcue sludge pump model 1YE. The equipment is used but in good working conditions. H: 20 m Flow: 1 m3/h

Specifications Type: SDJ 1000/1600 Year of construction: 2014 Lifting capacity: 1000 kg lifting height: 1600 mm Mast height, lowered: 2080 mm Mast height, raised: 2080 mm Total weight: 214 kg Directly from the customer used from November from CH-Pratteln available.

The Bottero 131BMK is an automatic float cutting table for flat glass, designed for straight-line cutting. Below you'll find the key technical specifications and features. Technical specifications Bottero 131 BMK Machine type: Float cutting table (monolithic glass) Brand/Model: Bottero 131 BMK Year of construction: 2000 Chassis number: GG60KB-6011 Weight: approx. 2,250 kg Power: 14.2 kVA Power supply: 380 V / 50 Hz Air pressure: 3 bar compressed air required Maximum speed: 80 m/min Glass thickness: 2 – 18 mm Maximum glass size: 2550 × 3300 mm Capacity: Straight cutting, no shaping/cutting of complex patterns ⚙️Features Automatic cutting table with CNC control for straight-line cutting. Optimization software (depending on version) for cutting patterns. Pneumatic scoring system suitable for float and low-e glass. Robust design for long-term industrial use.  ...

Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.

Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer; MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...

Available in stock 1 x Used 1000 bar Two Stage Hydraulic Hand Pump with hose. The equipment is used but in good working conditions.

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Warranty:, 1 year for continuous use, 2 years for standby use, Surplus unused 2022 generator., 2 similar units in stock; Gross weight [kg]: 1057; Engine: Cummins X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

Surplus unused 2022 generator set.; Gross weight [kg]: 6345; Engine: Cummins QSK23-G3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

QC11K 18×6000 hydraulic guillotine shears were built in 2018. This highly efficient machine is designed for precision cutting of sheet metal made from e.g. steel, non-ferrous metals, as well as selected plastics. Workpieces with a maximum thickness of 18 mm are machined by means of high-quality cutting knives with four cutting edges. All process parameters, on the other hand, are programmed on the intelligent DELEM CNC control with an intuitive interface and many useful functions. The QC11K 18×6000 guillotine shears weighs 40000 kg. Technical specifications of the QC11K 18×6000 guillotine shears - maximum cutting length: 6000 mm - maximum sheet metal thickness (Rm=420 N/mm2): 18 mm - maximum sheet metal thickness (Rm=700 N/mm2): 12 mm - work table height: 900 mm - back stop stroke: 1000 mm - adjustable gap between blades and cutting angle - motor power: 21 kW - power supply ...

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine Details Warehouse number 1105-03727 Machine Type Machining Center - Vertical Make YANG EAGLE Type MCV 1000 Year of construction 1998 Control type CNC Control Fanuc O-MD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1015 mm y-travel 500 mm z-travel 500 mm Control Fanuc O-MD Clamping surface table 1070x500 mm Table load - central/maximum approx. 250 kg Tool holder BT 40 Spindle speed: 24...6000 rpm Operating hours 5617 h Tool magazine with 20 seats/places Total power requirement 12 kW Information Equipment: CNC FANUC OMD -Cooling device BT 40 Copy of user manual available! Machine can be demonstrated! I.d..

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380

New, unused

Tipo de máquina Laminado y recubrimiento (laminating & coating) Procesos Preparada para laminado WET y DRY Probhvzbzjx N Ucxezjf Sistema de corte Sistema de cuchilla para poliéster (blade cutting system for polyester) Alimentador Mabeg feeder Formato mínimo de hoja 32 × 29 cm Formato máximo de hoja 106 × 142 cm Velocidad mecánica máx. 70 m/min Velocidad de producción máx. 65 m/min

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Siemens S7 - ET 200 SP 6ES7512-1DK01-0AB0 CP 1512 NEW PART Was delivered to us incorrectly.

IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...

Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Communication module CM 1241 6ES7241-1CH32-0XB0 CM 1241 RS422/485 NEW GOODS - unopened Was delivered incorrectly.