combi 1 used for sale

EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 822

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

length: 1000 mm width: 570 mm height: 1200 mm weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,x0,6x1,2 m used angle plate in very good condition with t-sluts and additional bores 22 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 735; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 56

; Gross weight [kg]: 4103; Engine: Perkins 1706J-E93TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 667

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

Reepack Reeflex 150 Ecoline tray sealer Manufacturer: Reepack srl, Italy Type: ReeFlex 150 Ecoline Year: 2011 Stainless steel Mold: baguette format, 300 mm x 85 mm, 3 times Speed: 6 – 15 / min. Power: 400 v., 50/60Hz, 3-phase Weight: 1000 kg Dimensions: L 4060 mm x W 1300 mm x H 1820 mm

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

; Gross weight [kg]: 2527; Engine: Perkins 1204J-E44TTAG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 518

; Gross weight [kg]: 18290; Engine: Caterpillar 3516B HD; Accessories: Control Panel, Caterpillar 3516B HD Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

Cytotocix safety cabinet for personnel and product protection.

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 1000

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

feed pressure: 250 bar liter capacity: 9 l weight of the machine ca.: 10 kg dimensions of the machine ca.: 1,15x0,4x0,4 m hydraulic gear pump - for more details see photos - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1615; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 250

; Gross weight [kg]: 1213; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 166

Control Heidenhain ... TNC 640 Clamping table surface ... 1200 x 500mm Axis X ... 1040mm Axis Y ... 540mm Axis Z ... 600mm Spindle speed ... 12000-_/min. controlled axes ... 3 cooling... 25bar SK 40 workpiece weight... 800kg Magazine slots ... 24 L x W x W ... 2900 x 2420 x 2840mm Machine weight... 6400kg The machine is in good condition, possible to test under power.

; Gross weight [kg]: 5255; Engine: Cummins QSZ13-G10; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

; Gross weight [kg]: 1500; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150

; Gross weight [kg]: 1600; Engine: Deutz TCD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 125A, 63A, 32A, 16A, Sockets: (230V) 4x 16A; Water Tank Volume [l]: 250

; Gross weight [kg]: 8380; Engine: KTA38-G14; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

Laska W 130 Automatenwolf Perforated disc 130 mm Filling quantity approx. 1 to 2 E 2 boxes Drive 7.5KW 400 Volt 50Hz

Key data: 450 , 1 , 1400

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg

; Gross weight [kg]: 1141; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and coolant heater, Caterpillar DE88GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 149

Caterpillar DE150GC Generator Set specifically designed for stand-by duty.; Gross weight [kg]: 1902; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 325

; Gross weight [kg]: 1416; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

max. format 75 x 105 cm Turn: 5/0 - 2/3 Year of construction: 2011 5 printing units + coating unit (chamber squeegee) + extended delivery Prinect Press Center Prinect Inpress Control Wallscreen Hycolor Film Dampening Units Inking unit temperature control CombiStar cooling unit (water-cooled) incl. Alcosmart Autoplate Advanced Preset Plus delivery and delivery Deelectrifying device StaticStar Dry pollinator PowderStar AP 500 Duo Powder Suction CleanStar IR / TL Dryer Heidelberg DryStar (water-cooled) AirStar Air Supply Cabinet (Water-Cooled) water-cooled machine without recooling system Reading totalizer: approx. 335 million printing Price on request. Worldwide delivery & installation.

Offer here a large vacuum slider from VAT, Model: F19-107685/1 He sealed a Leybold CoolVac 10000, which can also be purchased as an option.

Automatic Winkel Wolf KILIA set with built-in option Automatic Lifter for carts type Laska 200 liters for automatic filling. Manufacturer Germany. The machine is completely factory refurbished with 1 year warranty.

Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. This tunnel freezer is currently assembled in our warehouse, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Brand: Koma Type: Multi-Deck KM ...

Warranty, delivery, installation, samples and training included in the price.

Automatic injector INJECT STAR BI 124/248 needles. 2006 manufactured. The machine is complete with a rotary filtering system. Fully factory refurbished with 1 year warranty.

WOLF (MEAT GRINDER) KILIA 114 mm. The machine is completely factory refurbished with a 1 year warranty. Price: 5500€ without VAT. Delivery, installation, samples and training included in the price.

Used DSI V-3 36/100 vertical plate freezer on Freon / NH3 with 36 stations. the freezer can be set to 3 different sizes per station with dividers. This makes it possible to freeze different products per station. Inner dimensions 1 station: 1060x100x480 mm (LxWxH). Capacity and example based on: 51,9 kg fish fillet per station. 36 x 50,9 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 185 min Evaporation temperature of -34°C. Fish fillet: 605,9 kg/hr Capacity and example based on: 48,3 kg plat and herring per station. 36 x 50,88 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 190 min Evaporation temperature of -34°C. Plat and herring: 549,5 kg/hr For more information please feel free  ...

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

AUTOMATIC WINKEL WOLF KOLBE-ALEXANDERWERK 130 mm The machine is completely factory refurbished by MM SERVICE EOOD with 1 year full warranty.

Technical data for the pallet rack stand: Shelving system: Bito Type: PL 38 Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abbreviation: 90 x 65 x 1.80 mm Profile Type: SP18 Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,030 mm high 1,100 mm deep

used cabinet press Manufacturer: HSM Type: VL 155.2 Year of construction: 2006 Machine No.: 6114.144. Series No.: 270174730 U specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling chamber - 1100 - 700 x 1130 mm Bale size: 1.100x700x950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Capacity: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Grundfos TPED 50-160 / 2-S AFA-BAQE Original price 6500 € APPLICATIONS -Heating - Local hot water supply systems - Refrigeration and air conditioning systems FEATURES AND BENEFITS - Low power consumption - Correction according to existing working conditions - Easy to install Specifications: Frequency of rotation2900 rpm Nominal infeed17 m3 / h Nominal Head12 m Max hydrostatic head160 dm Shaft sealBAQE Fluids: Working fluidWater Fluid Temperature Range0.. 120 ° C Temperament. Liquids20 ° C Density998.2 kg/m3 Materials: Pump housingcast iron EN-JL1040 ASTM A48-40 B ImpellerCast iron EN-JL1030 ASTM A48-30 B Electrical data: Engine Type80B Number of poles2 Rated power - P22 x 1.1 kW Industrial Frequency50 Hz Nominal voltage3 x 380-500 V Rated Current2.15-1.80A Cos is a force characteristic0.91-0.82 Rated Speed360-4000rpm Energy ef ...

ID3685 Landbanden/Country conveyor belts Approx. 180m of conveyor belt for 650mm belt width, consisting of 30 hot-dip galvanized conveyor belt profile joints in profile heights of 120mm (9 pcs) and 100mm (21 pcs), 1 drive station with Stiebel 18.5/22kW gearbox with a gear ratio of i=11.6:1 - drum diameter 430mm - conveyor belt speed v= 2.68 m/s, 1 reversing station - drum diameter 330mm, 150 roller chairs, three-part, plus mounting screws approx. 180 m of land belt road for 650 mm belt width consisting of 30 pieces of land belt profile joints, hot-dip galvanized, in profile heights of 120 mm (9 pcs) and 100 mm (21 pcs), 1 piece of drive station with Stiebel slip-on gearbox 18.5/22kW with gear ratio i=11.6:1 - drum diameter 430 mm - conveyor belt speed v= 2.68 m/s, 1 piece of reversing station - drum diameter 330mm, 150 pieces of roller chairs, three-part plus fastening screws