combi 1 used for sale

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5  ...

Original MTU Charge air radiator cooler for MTU diesel engine type 16V2000G26F (3B)

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

Original Charge air radiator cooler for MTU diesel engine type 16V2000G25 (3B)

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

Key data: 2050 , 1150 , 170

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled

Working width: 1800 mm Roller width: 2000 mm Capacity appr.: 20 m Housing from: Edelstahl Guide rollers - dia: 127 mm Weight: 850 kg Dimensions (LxWxH): 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The vertical milling center FADAL VMC 15XTL was manufactured in 2007 in the United States by the FADAL brand. The machining center is digitally controlled by Fadal. It has a table size of 870 x 400 mm. The milling machine is designed for processing materials weighing up to 340 kg. It is equipped with a magazine for 21 tools. The spindle speed of the machining center, on the other hand, reaches 7500 rpm. Technical parameters of the FADAL VMC 15XTL CNC milling machine - CNC control: Fadal - working table length: 400 mm - working table width: 870 mm - maximum table load (evenly distributed): 340 kg - number of tools in the magazine: 21 pcs. - spindle drive power: 5.6 kW - maximum rotary speed of the vertical spindle: 7500 1 / min. - minimum distance between the spindle and the table: 101.6 mm - maximum distance between the spindle and the table: 609.6 mm - travel length in th ...

SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002

: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

MDDK 1000 1250.250

Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure,  ...

FOR SALE COMPLETE MAIN ENGINE MAN BRONS 12V 25/30 HAVE A GDY SIR; WE VE COMPLETE BRONS MAN 12V 25/30 ENGINE AT OUR STOCK. THIS ENGINE EQUAL AS SULZER 12 ASV 25/30 ENGINE ENGINES ARE IN VERY GOOD RUNNING CONDATION. WE VE SO MANY NEW GENUINE SPARE PARTS AT OUR STOCK. ENGINES ARE READY TO LOAD ON TRUCK. PLS FIND SPEC OF ENGINES AT BELOW 2400Kw 900 RPM 1984 YOB 20604/1045147 SERIAL NO. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Best regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

White temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test room volume: 500 ltr. Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of construction: 1990 Condition: used Complete plant closure, large selection of mezzanine, pallet racks, shelve ...

reverse soil tiller - 130 cm working width, right offset machine, three-point hitch cat. I, movable grilles roller 150 cm with scraper, 8 rows of blades, possible working depth 14 cm. Another reverse soil tiller 155 cm and soil tiller in stock!

The starting relief and safety valves are available in various sizes.

Wexiödisk WD-100GR Granulate Dishwasher The WD-100GR is a granulate pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with efficient centrifugal wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing device No pre-washing or scrubbing by hand thanks to vigorous washing with water and granules Great hygiene and fast drying with centrifugal cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be done from the front or from the side Effective dishwashing and high capacity with double dishwashing sy ...

Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round and square Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base

Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary

Used - parts, etc. Front axle - rear axle - steering cylindrical - Lenkorbitrol - diesel engine - seat - fittings - steering column cover - hood - gears - lights - hydraulic - cutting spindles - steering wheel - cooler - fuel pump - tank - snake - switch -. Bonnet etc.

Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: KVT 3,100 Motor: 400V Status: Generalueberholt and repainted Performance: 12 months; ready for use

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

RECON Part number: AA302180A ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

USED STAINLESS STEEL 1700 LITRES IPROCOMSA V MIXER REF#: C4291 1700 liter V mixer manufactured by Iprocomsa in stainless steel mounted on stainless steel lined structure with butterfly valve. Pneumatic vibrator at the bottom of the cone. With documentation and electrical panel. Dimensions: Inlet(x2) .. ø 580 mm Outlet flange ... ø int 250 mm ø ext 395 mm Total height .. 2910mm (when the mixer is spinning) Total height without turning: .. 2510mm Total length: ... 4010mm Total width: ... 1300mm Valve outlet to ground: ... 310mm General characteristics: Manufactured by IPROCOMSA Model B-1000 Type V mixer Material Stainless steel Year built 1998 Technical characteristics: Capacity 1700 L

RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

; ready for operation

USED TEFSA EHR 1200-16 FILTER PRESS REF.: C5899 Used EHR-1200/16 filter press manufactured by TEFSA. Currently it is provided with 19 plates of 1200x1200 mm but it has a capacity of 29 plates General characteristics: Manufactured by TEFSA Model EHR 1200-16 Type Press filter Year built 1993 Weight 13.300 kg With complete documentation Overall dimensions: Total length: 7,305 mm Total height: 2,000 mm Total width: 2,000 mm General characteristics: Working length: 1900 mm Hydraulic central motor power 5.5 kW Turning motor power: 1.5 kW Working pressure: 16 bar Closing pressure: 390 bar Technical characteristics: Work pressure 16 bar No. of plates 19 (ampliable a 29) Panel surface 1200x1200 mm Filtration area 40 m2 (ampliable a 60 m2) Volumen de torta 602,3 dm3 (ampliable a 920 dm3) - espesor 30 mm Hydraulic equipment 5.5 kW

RECON Part number: A308023 LB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Helium leak detector Manufacturer: Leybold Type: UL 100 Condition: Tested and ready exhausted: Oil-lubred pump Connection: 230V Delivery time: 1 where. (u.ue.V.); Ready

The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

RECON Part number: A308123 RB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

; ready for operation

The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min.  ...

The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...

RECON Part number: A308002C -Natural Gas -Complete Please note: Picture shows the bare cylinder head. After order it will be reconditioned ---------------------------------------------------------------------- ------- We also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.

Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...