combi 1 used for sale

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959

bore capacity in steel (diameter): 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min Control: total power requirement: 22 kW weight of the machine ca.: 23.000 kg dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg

Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: CF-D-160-10 -Shaft: Ø 22 mm (pre-drilled) -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H70 mm -Weight: 9 kg

Geared motor, electric motor, three-phase motor -Speed: 19 rpm -Power: 0.045 kW -Design: B5 angle -Shaft diameter: 12 mm -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 225/140/H120 mm -Weight: 3.7 kg

Eyelet machine Hang 103 LOK, machine number 30621, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front  ...

plate length: 1550 mm plate thickness: 3,5 mm number of rolls: 3 roll diameter: 120 mm total power requirement: 2,2 kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 2,2 x 1,5 x 1,6 m Electrically operated round roller via foot lever, Sturdy, welded construction stand, Rear roller adjustable for conical bending, Rollers are hardened, Top roller can be swivelled to remove the workpiece. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54129/029/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Electric motor, three-phase motor -Power: 5.5kW -Speed: 2920 rpm - Shaft: Ø 38 mm -Type: B5 -Protection class: -Number: 1x available -Dimensions: 445/300/H305 mm -Weight: 41kg

calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800

Rotary table, rotary indexing table, dividing head, dividing head -Chuck size: 125 mm -Feed: Rohm -Division: 12 -Height: 300 mm -Dimensions: 170/170/H300 mm -Weight: 19 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: REO -Type: REOHM BW 155/3000/60 -Resistance values: 0.8-600 ohms -Continuous output: 30,000 p -Number: 1x resistors available -Price: per piece -Weight: 10 kg/piece

Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...

Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 175 mm -Edition: plastic -Tip height: 250 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 560/100/H580 mm -Weight: 25 kg

Lifting table, lifting platform, lifting platform, car lift -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg

Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg

Table dimensions: 2500x 780 mm Motor output: 7,5 kW Spindle diameter: , mm reus: 1.500 - 10.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24109 Specifications: - 4 spaces for 50L. bottles - Full-length bottle cage - Exhaust air opening - Closet is lockable , key is provided - Required space W 1400 x D 465 x H 2150 mm - Weight approx. 120 kg

Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...

Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...

Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg

Cardboard scissors working width 110cm, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000

max. wheel diameter: 130 mm gear width: 25 mm max. module: 4 min. module: 0,5 Control: Siemens 840 D strokes - infinitely variable: 500-2500 Hub/min stroke: 30 mm work-spindle diameter: 85 mm total power requirement: 49 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 6,4x4,5x4,4 m Counterhold without center hydraulically operated counter arm and Linear guides. For automatic ring loader, with 4 stations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 pieces of servo motors incl. cables, used REXROTH INDRAMAT Mac 112-B-0-PD-4-C/130-A-0/WI522LX

Gear motor, electric motor -Speed: 55 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 17 mm -Protection class: IP 65 -Dimensions: 395/185/H140 mm -Weight: 12.8 kg

Gear motor, electric motor -Speed: 32.5 rpm -Power: 0.37 kW -Brake: 415 V -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 465/195/H150 mm -Weight: 17.7 kg

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

Gear motor, electric motor -Speed: 31.5 rpm -Power: 0.25 kW -Construction: B5 angle -Brake: 415 V -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 445/190/H140 mm -Weight: 16 kg

Gear motor, electric motor, three-phase motor -Speed: 45.5 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 430/200/H140 mm -Weight: 15.1 kg

Cutting machine Wohlenberg 115 MCS-2 TV, machine number 3524-007, air table, light barriers, program control, monitor, side tables, back table cover, 1 spare knife, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Surface Grinding Machine MONOPRECIS 1DR Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1983 Manuel Magnetic chuck dimensions: 2500 x 130 mm Max Grinding wheel dimensions: Ø 170 mm Diamond system Manual movement Voltage: 380 V Dimensions (L x W x H): 1300 x 1200 x 1800 mm Weight: approx 800 kg

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 9,540 mm Number of fields per row of shelves: 05 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 100 pcs. Pallet spaces per field: 100 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of shelve ...

Suitable for the mixing of pre-cut meat and fat with salt, nitrite salt, spices or additives for the production of burgers, ground meat, sausage, nuggets, kebab, various types of dry sausage, vegetables, cheese products and many more. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles and partial spirals enabling a fast emptying.

Gear motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 410/200/H205 mm -Weight: 17.4 kg

High throughput tray washing system, designed to accommodate a total of up to 1500 crates per hour, split over two conveyorised lanes.

plate thickness: 3 mm pressure: ? t total power requirement: 3,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 0,9 x 1,1 m No. 3549 Notching machine BOSCHERT K 30 / 120 MINI No. 1 Working area: Table 800 x 450 Drive: 3,5 Foot switch Table 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°) Space requirement approx. 1300 x 900 x 1100 mm Weight approx. 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 11,430 mm Number of fields per row of shelves: 06 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 120 pcs. Pallet spaces per field: 120 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of s ...

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece