131,120 used machines on RESALE, but how to find them? Machine Search
range L-W-H: 1066 x 460 x 940 mm weight: 80 kg : 12 St. Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Maximum loadable weight of the tool trolley is 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gearwheel Shaping machine WMW Modul ZSTTK 1250x24
Mecalux transfer roller conveyor slider 90° 915-1410-870+445 RA1915 Make: Mecalux Running direction: both directions Roller width (RB): 870 to 450 mm Nominal/outer width frame (NB): 960 and 540 mm Total width: 1410 mm Length: 915 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 2x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 725 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) nominal voltage: 400, 24V angle: 90° Conveying length in mm: 915 Nominal / outside width in mm: 540, 960, 1410 Roll width in mm: 870 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24 ...
Thank you for your interest in our used machines, which we are able to offer you as follows: Manufacturer: Sollich Model: 100F Chocolate Tempering Machine "Mini Temper" Year of construction: 1992 Masch. Nr.: 2241 Capacity: up to 80 kg/h Miscellaneous: good condition Chiller New in 2023 With the 100 F, you can keep 25 kg of couverture at a constant temperature and process it ideally pre-crystallized for several hours, or produce up to 80 kg of pre-crystallized couverture per hour. We offer this machine for sale "as is". from Hess warehouse. Lichtenau, unpackaged
Chassis number: 5084 Weight: 0,25 tons Power: 1,3 kw Length mm: 1000 Width mm: 1000 Height mm: 1800 Working height: 90 cm Transport size L x W x H: 1,0 x 1,0 x 1,8 Condition machine : Used Control type: Manually Electric. Connection: 16A 5P Photos/film available: Photos available Remaining: Originally it is a Quaranta
- Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14.5 kg
Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 175 mm -Length: 165 mm -Height: 220 mm -Table: 175 x 165 mm -Groove width: 14 mm -Weight: 13 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 145 mm -Recording: MK2 -Dimensions: 220/190/H150 mm -Weight: 6.5 kg
Serial Number: 5085 Weight: 200 kg Power: 1,1 kW Length mm: 1000 Width mm: 900 Height mm: 1800 Working height: 90 cm Min.-max. glass thickness: 2- 8 mm Min.-max glass size: Min. 100x100 - < Number of brushes: 1 Condition machine : Used Control type: Manual Electric. Connection: 16A Missing parts: None Electric diagram: Photos and video available
New Part number: 526 070 12 01 EX52607300010 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.
Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed
grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...
Clamping plate, welding table, welding table, straightening plate -Width: 1210 mm -Length: 4000 mm -Height: 830 mm -Sheet thickness: 30 mm -with steel frame -Number: 2x plates available -Price: per piece -Weight: 1400 kg/piece
spindle diameter: 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min total power requirement: 22 kW weight of the machine ca.: 23.000 t dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer one second hand sewing machine for the manufacture of industial sacks, type 1014/1, Icoma, Germany, Tube width 20-80 cm, Tube length 55-150 cm, with cutter, sewing head from Union Special, machine ready for test production, one spare sewing head could be given with the machine
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 3490 mm -Height: 790 mm -Sheet thickness: 25 mm -with supporting ribs -Weight: 2700 kg
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 810 mm -Length: 1205 mm -Working height: 820 mm -with supporting ribs -Sheet thickness: 25 mm -Weight: 260 kg
Clamping plate, welding table, welding table, straightening plate -Diameter: 1600 mm -Height: 900 mm -Sheet thickness: 30 mm -with steel frame -with vise -Transport dimensions: 2140/1610/H900 mm -Weight: 620 kg
Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger
John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...
Primutini Cut-Off Tape Saw Roll diameter 1300mm Roll width 140 mm Cutting width to the right and left of the Saw blade 150mm Cutting height max. 650mm Drive 30 kW
x-travel: 800 mm y-travel: 630 mm z-travel: 800 mm Control: Siemens type: 840 D size of pallet: 500x630 mm numbers of pallets: 8 : 360 ° turning speeds: 6000 U/min Table load: 800 kg spindle taper ISO: 50 Tool changer: Pos. chip conveyor: Feed: 1-36000 mm/min Cooling through the spindle: 50 bar total power requirement: kW weight of the machine ca.: 19,5 t dimensions of the machine ca.: 8x7x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...
Clamping plate, welding table, welding table, straightening plate, construction table -Width: 1840 mm -Length: 5200 mm -Height: 850 mm -Sheet thickness: 28 mm -with supporting ribs -Weight: 2400 kg
COSMOS 1050 precision surface grinding machine, grinding area 1000 x 500 mm, grinding wheel 400 x 80 mm, magnetic clamping plate 1000 x 500 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take over the installation and training on site, as well as the subsequent service. For more information, please visit: long-grinding technology
Pallet wrapper, stretch machine for pallets, second-hand - : Price ex location: 4.250.-€ (net), incl. loading! Very robust device! Type HAD 1500 Completely overhauled by the manufacturer Equipment of the machine: Electrical control system completely overhauled (frequency converter) Foil brake (magnetic particle brake newly powder-powdered) adjustable Foil carriage restored Photocell for pallet height scanning Manual Functions Turntable remounted Drive-on ramp used Additional design: with wheelchair access (can be moved with forklift) Condition: very good Available: now Location: 91177 Thalmässing
Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...
Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.
Tool holder, milling tool holder -Recording: SK40 -Tool holder: Ø 28 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 60/60/H210 mm -Weight: 1.5 kg
System: KHS Type: Innofill-UM Compacta 40-10KK For bottling juice and spirits Pitch Circle : 1440 / 360 Pitch : 36 Pi Width: 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg System: KHS Type: Innofill-UM Compacta 40-10KK For filling juice and liquor Pitch circle : 1440 / 360 Pitch : 36 Pi Width : 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg
Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg
Clamping plate, welding table, welding table, straightening plate, straightening table -Width: 1000 mm -Length: 720 mm -Height: 200 mm -with supporting ribs -Plate thickness: mm -Weight: 486 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: Ø 150 mm -Height: 20 mm -Hole: Ø 30 mm -Quantity: 1 milling cutter -Dimensions: 150/150/H20 mm -Weight: 2.2 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 138 mm -Height: 25 mm -Socket: Ø 30 mm -Number: 1 cutter -Screwed saw blade: 140 x 4 mm -Price: complete -Weight: 2.7 kg
Key data: 140 mm
We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg
Key data: 140 mm
We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!
Moving bezel, tracking bezel, setting stick, lynette -max: Passage: Ø 140 mm -Edition: Red brass -Hole spacing: 335 mm -Peak height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg
Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg
Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION
Reference Num.: 4103 Brand: Heidelberg Type: SM 102-2-P Construction year: 1998 Impressions: 477 mio Size: 720 x 1,020 mm Available: directly Status: Not in production Location: Malaysia Sheet size: min 280 x 420 mm, max 720 x 1,020 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 41.14 mm Machine size: Length: 6,680 mm, Width: 3,160 mm, Height: 2,170 mm Total weight: kg 16,900 / lbs 37,258 Equipment: - CPTronic - WEKO Puderapparat T66
Key data: 650 mm, 1300 mm, 1 U/min
Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 124 mm -Edition: gray cast iron -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 380/90/H400 mm -Weight: 14 kg
Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg
Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg
1000 pieces of insert grid 1315 x 1030 x 30mm Used goods, very good condition, see pictures. Bearing rod height 30 mm Load-bearing rod thickness 2 mm Mesh size 40 x 4 mm galvanized Negotiation price: € 39,-- net per piece Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)
Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,
maximum number of results exceeded
please refine your search
