combi 1 used for sale

Nevo3D/EVO-tec EL-102 (Baujahr 2022) Industrieller FDM-3D-Drucker aus österreichischer Fertigung, konzipiert für Prototypenbau, Kleinserienfertigung und funktionale Bauteile mit hohen Qualitätsansprüchen. Technische Merkmale: FDM-Technologie mit Dual-Extruder-System für Multimaterial-Druck und lösbare Stützstrukturen Ganzmetallkonstruktion für präzisen Dauerbetrieb und minimale Vibration Geschlossenes Bauvolumen – geeignet für anspruchsvolle technische Materialien Industrietaugliche Mechanik und Steuerung Einsatzbereiche: Prototyping, Kleinserien, Forschung und Entwicklung Zustand: Gebraucht, gepflegt und sofort einsatzbereit. Funktionsfähigkeit gewährleistet. Besichtigung und Testdruck nach Vereinbarung möglich. Standort: Velbert Logistik: Verladung per Stapler vor Ort möglich. Transport im Umkreis von 350 km kann organisiert werden. Die Maschine verbindet österreichisc ...

Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Schaltgr. Dyn 5 Code: 9129 IP:23 Primary: 500 V 12A Secondary: 399/231 V 380/220V 361/209V 15.15A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg More items - new and used - can be found in our shop! International shipping costs on request!

with 3 compression chambers, from 30 t to 150 t material quantities per year, vertical, for cardboard, foils, canisters, PET bottles, 200 kN, volume reduction up to 90%, ball weight 250 kg,

with EZ3200 weighing device, Volume / capacity (m3 / l): 14, Working hours: 1, Year of construction: 1

Working width 190 cm, suitable for Volvo S3 quick coupler, 2300 kg, transport dimensions: LxWxH: 190 x 200 x 130 cm

Working width 150 cm, with teeth, with Verachtert CW30/40 mount

NEW

110 cm working width, suitable for 20 t excavator

NEW, 150 cm width, with Lehnhoff MS08 Symlock mount, 196 kg dead weight, suitable for 5.6 - 9 t excavators

100 mm diameter pile driver suitable for Hammer HM100

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

NEW, 180 cm width, 215 kg net weight, suitable for Euro attachment, Year of construction: 2021

NEW Pallet fork 1200 x 120 x 50 mm FEM 2A 2.5 t load capacity Carrier width 1.20 m with Liebherr 506 attachment

2025 BIG embankment bucket 140cm with MS03 Symblock attachment, Technical specifications:, - Weight: 165 kg, - Recording width: 140 cm, - Contents: 199 liters, - CAT 4 - suitable for 4 - 5.5 t excavators

2025 BIG backhoe bucket 120cm with Martin M3 attachment, Technical specifications:, - Weight: 98 kg, - Recording width: 120 cm, - Contents: 160 liters, - CAT 3 - suitable for 2.8 - 3.9 t excavators

VermaTEC slope bucket 120 cm with MS03 Symblock attachment, as new, rigid, suitable for MS03 Symblock mount, Excavator class: 2-5t, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

NEW, 100 cm width, 125 kg heavy, with Weidemann attachment - 670 mm attchment width, 322 mm attachment height

NEW, width: 140 cm, own weight: 165 kg, with Lehnhoff MS03 Symblock recording, CAT 4 - suitable for 4-5.5 t excavators

NEW, Bobcat 114 cm adapter with Euro mount

NEW, 120 cm wide, with Lehnhoff MS01 Symlock mount, 73 kg net weight, suitable for 1.9 - 2.7 t excavators

Used slope bucket / ditch cleaning bucket, Working width: 100cm, with Lehnhoff MS01 recording

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Container Size With Actual Configuration: 2 l // Number Of Heads: 5

Three-phase motor, electric motor -Manufacturer: VEM, Electric motor type IE2-WE1R 100L 4 H -Power: 2.2 kW -Speed: 1455 rpm -Shaft: Ø 28 x 60 mm -Protection rating: IP55 -Design: B5 -Dimensions: 395/200/H240 mm -Weight: 38.2 kg

Linear actuator + planetary gearbox, stroke 1500, EGC-120-1500-TB-KF-0H-GV, 556815 +.., Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x290x120mm, 70kg, slide 300x70mm, stroke 1500mm, A blue cap at the front and a black round cover at the rear will be supplied later 2) Neugart planetary gearbox, PLE080-005-SSSB3AE-E19/40/95/115/B5/M8, 42631, Festo number 552195, transmission ratio 5:1, 6 months warranty We give you 6 months warranty for these goods from the date of invoi ...

Die-cutting machine for e.g. slipcases with many die-cutting forms

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

Industrial Table Cooler – Van Spall Associates We are offering a Used industrial table cooler from Van Spall Associates, a division of CHP Engineering Services Ltd – built for durability and high-efficiency cooling in demanding industrial environments. Product Specifications: Model No: ABC 123 9303 - DTS Serial No: 0204 D 9351 Test Pressure: 20 BAR Design Pressure: 16 BAR Design Temperature: 90°C / 115°C Date Tested: 13/11/99 Condition: Fully functional, tested, and ready for deployment This robust table cooler is ideal for heat exchange and cooling applications in industrial and power generation settings. Available for immediate sale! For inquiries and pricing: financeukpowergeneratorsltd.com 07379 844145

Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven

GAMMA MECCANICA GM 125 COMPAC - TOTALLY RECONDITIONED, Extrusion line with pre-compactor, Nominal throughput rate 700-800 kg/h depending on the type of material and feeding rate, Average energy consumption : 0.25-0,30 kwh/kg, The line includes:, Loading belt, tunnel metal detector, compactor with dosing unit, extruder with 125 mm screw diameter, 35 L/D, nitrided screw and barrel in very good conditions., The line was working with LDPE film and PPL non woven., Previous owner never pushed the extruder over 600 kg/h, semi-automatic, non-stop hydraulic screenchanger, oleo-dynamic pack, water ring pelletizer, drying centrifuge, recycling water tank, electric cabinet for the complete management of the line, The line is offered reconditioned, See Constructors [description](.gamma-meccanica.it/en/plastic-recycling/plastic-recycli ng-compac/) for a new line like this one, availability: immediate, ...

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

2 labeling units for applying a lid and a body label,, Dispensing width SES 80: 85 mm, SES 120: 125 mm,, dispensing speed: 0 - 60 m/min,, Unwind: diameter: 300 mm,, spool: diameter: 170 mm,, was used to label plastic cans.

Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.

Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System, Manufacturer: Carsoe, Model: Anytray Buffer 1500 LLANONE Right Pneumatic, Year of manufacture: 2022, Machine type: Tray buffer / product accumulation system, Description, The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines., Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities., Technical Specifications, - Manufacturer: Carsoe, - Model: Anytray Buffer 1500 LLANONE Right Pneumatic, - Year: 2022, - Power: 0.46 kW, - Supply voltage: 230 VAC + N + PE, - Frequency: 50 Hz, - Air pressure: 6 bar, - M ...

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -Manufacturer: Heidenhain, for lathes and milling machines -Type: LS 476 ML 1540 mm --Reading head: AE LS 476 -Dimensions: 1645/60/H30 mm -Weight: 2.6 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg

Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder, -Manufacturer: RUCKh -Type: Pitch GH 112/4XL -Power: 4.5 kW -Max. Speed: 1450 rpm -Voltage: 288 V -Brake: 100 Nm -Fan -Construction: B5 -Tachometer -Shaft: Ø 28 x 60 mm -Dimensions: 890/285/H525 mm -Weight: 100 kg

Geared motor, electric motor, electric geared motor -Manufacturer: Caenaho, geared motor type PA-09 / RD-09 -Voltage: 110 V / 50 Hz -Speed: 137 rpm -Performance: 1.27 m Technical data: see photo of the type plate Quantity: 1 piece available Price: per piece -Dimensions: 240/120/H200 mm -Weight: 6.2 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit: from automatic lathe SUGA type STS-2 -Manufacturer: Nachi Model VD 11B-25-25-AL -Motor: Toshiba type IK/FCKL3-I -Power: 1.5 kW/1400 rpm -Max. Pressure: 19.6 bar -Liter output: 25 l/min -Dimensions: 570/390/H250 mm -Weight: 51 kg

Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder, -Manufacturer: RUCKH -Type: Pitch GM 160M-4 -SAP no.: 48587 -Power: 7.5 kW -Max. Speed: 1600 rpm -Voltage: 288 V -Brake: was removed -Fan: -Construction: B5 -Tachometer: -Shaft: toothed Ø 42 x 50 mm -Dimensions: 870/380/H575 mm -Weight 155 kg

Servo motor three-phase motor, electric motor, direct current motor, pitch motor -MOOG: DC motor FGVR 180L4-DA-BC-C -Speed: 1250 rpm -Torque: 120 Nm -Voltage: 400 VDC -with: brake/fan/heater/encoder -Shaft: Ø 50 x 70 mm -Construction: B5 -Protection class: IP54 -Price: per piece -Number: 2 pieces -Dimensions: 920/448/H490 mm -Weight: 301 kg/piece

Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder -Manufacturer: RUCKH -Type: Pitch GM 160M-4/SSB -SAP No .: 56418 -Power: 7.5 kW -Max. Speed: 1600 rpm -Voltage: 288 V -with brake/fan/encoder -Construction: B5 -Shaft: Ø 42 x 50 mm -Dimensions: 870/370/H555 mm -Weight: 171 kg

Three-phase motor with 2 speeds, electric motor -Power: 4/4 kW -Voltage/frequency: 220/380 V 50 Hz -Speed: 1460/2960 rpm -Voltage/frequency/power: 240/460 V 60 Hz 4.8 kW -Speed: 1760/3550 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP44 -Dimensions: 490/300/H330 mm -Weight: 71 kg