com used for sale

Pneumatic cylinder, compact cylinder, double-acting COMPAIR PXH125N02M400BAC M08R. piston diameter: Ø 125 mm stroke: 400 mm rod diameter: Ø 30 mm rod thread ( outer ): M27 x 2.0, length: 63 mm with nut, wrench size: 40 mm pneumatic connections: 1/2 ( inch, female thread ) New ! Dimensions: 690 x 140 x 140 mm

Hydraulic Pump COMMERCIAL / INTERTECH P17A 196BEFB23-66 ( P17A196BEFB23-66 ) Dimensions 180 x 150 x 170 mm

Hydraulic Pump COMMERCIAL / INTERTECH P5A193BEAQO6-96 Dimensions 130 x 110 x 130 mm

Hydraulic Pump COMMERCIAL / INTERTECH P11A234BEEJ06-85 Dimensions 130 x 120 x 100 mm

Hydraulic Pump COMMERCIAL / INTERTECH P11A237BEEJ08 - 85 ( P11A237BEEJ08-85 ) Dimensions 130 x 100 x 9 mm

Hydraulic Pump COMMERCIAL / INTERTECH PSA193BEAQ03-97 Dimensions 110 x 130 x 100 mm

Engine Brand: CUMMINS, Conditie: RECONDITIONED, Nominal Power @ Nominal Rpm: 161 Kw, Engine Injection Type: DIRECT COMMONRAIL , Engine Aspiration Type: TURBO , Air Cooling Type: LUCHT-LUCHT INTERCOOLER , Bore: 107 mm, Stroke: 124 mm, Engine Capacity: 6700 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 2500 Rpm, Engine Fuel Type: DIESEL , Flywheel SAE: No Flywheel , Engine Condition: Rebuild , Rated Power: 164 Kw, Rated Speed: 2200 Rpm, , https://www.hamofa.com/catalog/product/view/id/292651, , = More information =, , Type: Engine, Type number: QSB6.7 CPL8466

Dosing machine Comas DPCI 600 - Year of construction 2004

Fully Equipped Bottling System A complete bottling system, ideal for beverage production! Perfect for both small and large-scale operations. System Components: Heated water tanks: 6 units of approximately 3000 liters each 1 unit of 6000 liters 1 unit of 10,000 liters Production lines: 2 complete bottling production lines Small bottling systems: 4-5 units for smaller productions Vacuum machines: Various machines for efficient packaging Blue Water system: Large system with separate oil burner Additional equipment: Approximately 70 components, including machines, spare parts, and accessories Advantages: Ideal for starting or expanding your beverage production Complete system, ready for use High production potential Has been active until 2023

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

This COMAU C4G NH4 – 200 robot arm was manufactured in 2004. It is part of a set of 4 refurbished industrial robots, fully serviced and in excellent working condition. These units have been mechanically and electronically overhauled, ensuring reliable performance. Ideal for automation, assembly, or handling applications. Contact us for more information about this machine.

Laurijsen WeegAutomaten COMBIMAT CM-L4S Linear scales The linear scales from Combimat were specially designed as an initial model for the first first step in the automation of the packaging process. Thanks to the compact design, the weighing devices can be easily installed in any production area and can be cleaned very quickly when changing quickly when changing products. Applications The linear scales from Combimat are particularly suitable for dry, fine-grained products that can be easily conveyed in the conveyed in the vibrating chute: Tea, coffee, corn, rice, seeds, grain, animal feed, granulates, grain, etc, Advantages The weighing machines from Laurijsen WeegAutomats offer numerous advantages: - Very compact design - Machine made entirely of stainless steel - Touchscreen operation - Quick cleaning, very suitable for short suitable for short passages - Maintenance-fre ...

1992 COMBINED CONCENTRATION SYSTEM Type: AFN 454 US The system was in operation for a maximum of 2 months per year. WITH AROMA RECOVERY, USED, REBUILT AND EXPANDED, IN ADDITION TO EQUIPPED WITH NEW COOLING TOWER CIRCUIT EVAPORATOR TYPE OPERATION Horizont TYPE HEAT EXCHANGE al, CONDENSATION AROMA 4-stage EXTRACTION with SYSTEM VERSION: WATER live steam EVAPORATION SYSTEM TYPE > NEW preheating, recovery, cooling mixed condensation semi-barometric rectification - tray column especially for the juice industry 4 840 Kg/h AFN 454 U-S Technical data: 1-stage dearomatization and concentration, combined operating mode SYSTEM TYPE: AFN 454 U-S PRODUCT: Apple juice, cloudy Input quantity 6 600kg/h Input dry matter 12,0% Input temperature 15 ·c Water evaporation 4 840 kg/h Initial quantity 1 760 kg/h Starting dry matter 45 % Starting temperature approx. 18 ·c Aroma  ...

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - / Contact us at -

For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

Chip belt dryer, Kuvo belt dryer, length 15.5 meters+7 meters

Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 1 x core puller Type: Horizontal Drive: Hydraulic

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Sell some of our machines from our warehouse

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1168 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

Manufacturer: COMUNA-Metall Year of Manufacture: 2008 Gas type: Category 12HL Connection pressure: 20-50 mbar Nominal power range: 150/195 kW Voltage: 230/400V, 3-phase, 50Hz Fuse: NH 00, 100A Permissible operating pressure: 6 bar Thermal power: 100 kW Electrical power: 50 kW Protection class: IP 54 Permissible operating temperature: 90/70°C Find more here - / Contact us at -

VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -

2. Other and Auxiliary Systems - SNA-15. Low Voltage Control Technology Switching and control systems Siemens / AEG, system-related, Built: 1991 (Main distribution / Cabinet systems) Manufacturer: Siemens, 8PU:011, 30 fields NS switchgear combination (Motors, shunting distributions, etc.) Technical Data: - 6 relay cabinets - 2 PLC cabinets - 2 converter cabinets for fire extinguishing pumps - NS fuse outputs, etc. Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

description: 180 ° curve conveyor suitable for different tray formats. Belt width 800 mm Radius 1800 mm New-quality motor can be offered with the desired requirements width: 4450 mm length: 2500 mm serial number: 642-92-900 S176 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techni ...

Refrigerated table COOL COMPACT Type: KTM824660 Dimensions (W/D/H) cm: 140 x 80 x 85 cm Technical services: Temperature range: Temperature range -2° to +10°C Version with convection cooling 2 refrigerator compartments with a total of 5 drawers for 60x40 trays digital control Work surface with cutting board 140 x 30 x 2 cm Specifications: Connected load: 230 V / 50 Hz / 440 W Capacity: 370 / 333 liters Year of Make: 2010 Function checked, machine ready to plug, ready for immediate use! Condition & accessories see original pictures! If you have any questions, email or call.

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Manufacturer: SEW Mowiedrive Compact MDX60A0110-503-4-00, Type: MDX60A0110-503-4-00, Sale without warranty: 16,8 KVA, No right of return: 0-180 Hz, Installation height: 24 Ampere,

Manufacturer: Commander Frequenzumrichter, Type: SE 23400150 SE T 2,5, Serial number: 3781643037, FREE TEXT: kw 1,5, Free text 1: 0-1000 Hz, Free text 2: 6,4-4,2 Ampere,

Manufacturer: KEB, Type: Combivert, Model: 10.56., Hz: 50/60Hz, Output DC Volt: 380/415 V, Output PpK= kW: 2,2 kW,

Manufacturer: Commander SE, Type: SE 23400220, Model: SE 3,5 T, Serial number: 2083802671, Frequency converter: yes, mH/Hz: 0-1000, FREE TEXT: 380-480 Volt, Free text 1: 2,2 kw, Free text 2: 9,0-5,0 Ampere,

Manufacturer: Commander SE, Type: SE 23400400 SE 5,5 T, Serial number: 2083802671, FREE TEXT: 4 kw, Free text 1: 50-60 Hz, Free text 2: 0-1000 Hz, Free text 3: 14-9,5,

Manufacturer: Commander SE, Model: SE 2,5 T, Serial number: 3781643041, Frequency converter: yes, FREE TEXT: Ampere 6,4-4,2, Free text 1: kw 1,5,

Manufacturer: Comil, Control: hand, Corpus length max mm: 2800, Hydraulical: yes, Roll transport: yes, Single machine: yes, Machine from production line: möglich, Belt transport: Querband, Belt width: 600, Total lenght: 3500, Total power kW: 1,5, Feeding speed max m/min: 10, Working hight adjustable mm: yes, Feeding belt mm: 2500, Outlet conveyor mm: ca.600,

Manufacturer: KEB Homag Umrichter, Type: Combivert, Model: 09.F0.R11-3429, Serial number: 93410337/021161, FREE TEXT: AC-MOT 1,5 kw, Free text 1: 2/4 P, Free text 2: 50-60 Hz, Free text 3: 2,8 Kva,

Manufacturer: Commander SE Frequenzumrichter, Type: SE 23400150 SE 2.5 T, Serial number: 3781484007, FREE TEXT: kw 1,5, Free text 1: 50-60 Hz, Free text 2: Ampere 6,4-4,2,

Manufacturer: Commander SE Frquenzumrichter, Type: SE 23400150, Model: SE 2,5 T, Serial number: 3781643022, Hz: 0-1000, FREE TEXT: kw 1,5, Free text 1: Ampere 6,4-4,2,

Manufacturer: KEB, Type: Combivert, Model: 12.56.201, Current (A): 9 Ampere/4 Kw,

Manufacturer: Superfici, Type: Compact 3 P, Year: 2015, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 90, work piece cleaning: yes, work piece detection: yes, Schnellwechselsystem : yes, Gun carrier: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Transportsystem Papier: yes, Inlet conveyor: yes, wast cleaning: yes, Feeding speed m/min: 2 - 6, Jet drier mm: 12000, Removing belt: yes, Year :2015

Manufacturer: IMA, Type: Compact F 12, Year: 1996, Control: Beckhoff, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 18, Infeed table: yes, Premilling: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: yes, 4 motors: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Year :1996

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990