133,685 used machines on RESALE, but how to find them? Machine Search
Height=2.117 m, Overall length= 0.79 m, Overall width= 0.686 m, Net weight= 135 kg,
Height=2.113 m, Overall length= 0.75 m, Overall width= 0.686 m, Net weight= 121 kg,
Height=2.117 m, Overall length= 0.79 m, Overall width= 0.686 m, Net weight= 135 kg,
Height=2.113 m, Overall length= 0.75 m, Overall width= 0.686 m, Net weight= 121 kg,
Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 257 kg,
Height=2.113 m, Overall length= 0.75 m, Overall width= 1.375 m, Net weight= 207 kg,
Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 168 kg,
Complete Stainless Steel Cold Rolling Facility from Hyundai Steel STS Incheon Capacity: 239.000 TPY Width: 600 – 1320 mm Stainless 304 and 430 Consists of: (2) 'Production Machinery Co.' Annealing and Pickling Lines (Lot 1) (2) 'SMS' 20-Hi ZM Cold Strip Mill (Lot 3, Lot 4) 'SMS' 2-Hi Skin Pass Mill (Lot 5) 'Production Machinery Co.'& Coil Preparation Line (Lot 6) 'Production Machinery Co.' Grinding and Polishing Line (Lot 7) 'Honda' Cut-to-Length Slitting and Shearing Line (Lot 9) 'Honda' Slitting/Recoiling Line (Lot 10) These production lines come from reputable Original Equipment Manufacturers, including two 20-Hi Sendzimir Mills originally from DEMAG-SACK, now under SMS. With a proven track record of performance and meticulous maintenance, these assets represent a remarkable investment opportunity.
We have a unit with Bitzer compressors for sale. System wit R744 refrigerant (CO2) The unit capacity is 22kW -35C To and -5C Tc. Control panel with frequency inverter.
Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
4000 werkuren! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L
Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.
Ref. no.: 18092 Manufacturer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil fe ...
Key data: 264 KW, 450 kVA, 400 V
Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994
Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.
Key data: 2000 KW, 2500 kVA, 400 V
2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.
Key data: 75 KW, 112 kVA, 400 V
Buderus Gas CHP EN 70 MAN E0836 E302 Gas electricity and heat generator from 2014 with 81,648 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Gas CHP Engine: MAN E0836 E302 Serial Number: 100006776 Power [KW]: 75 Year of Make: 2014 Hours: 81,648 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 30692/5 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 440
Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.
power capacity: 7,5 kW feed pressure: 10 bar volume capacity: 815 dm³ /min total power requirement: 7,5 kW weight of the machine ca.: 0,4 kg Alup piston compressor - Tank 350 liters - Soundproof housing (68 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizon AFC-544 AKT, Year 2006 Flatfeeder 4 pockets 1 knife 2 side pockets delivery LCV-54 Etc. Available: at short term
Lohberger Stove Oven Water Bath Brainmarie Salamander Water bath E.WS09EBM2.1 (2.3 kW) 4 burner stove E-4/850 (17 kW) 2 burner stove E-2/850 (6.8 kW) Oven eloma SA1 Salamander (2.1 kW) Faucet Metrics: Width: 2250 mm Depth: 850 mm Height: 750 mm Backsplash: 60 mm Hot plates: 300 x 300 mm Water bath: 510 x 610 210 mm More items - new and used - can be found in our shop! International shipping costs on request!
Senco pneumatic clamping device, pliers clamper, stapler Top condition, as good as new unused, is sold as used
Battery Production Facility Manufacturer: Aumann Year: 2016 Like new 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14 cells) and LTO (36 cells) Find mo ...
Complete line for carbonated soft drinks and carbonated mineral water capacity: 5.300 bph by 500 ml PET bottles neck size: PCO1881 working hours: approx. 28,000 hrs. consisting of: 1. Kosme KSB 4R PET stretch blow moulding machine year of manufacturing 2018 includes: preform hopper/elevator, preform unscrambler and ATS mould chiller. 2. Air conveyor 3. Caronation Techniques E0526 mixer year of manufacturing 2016 4. Filler Kosme Barifill with 16 filling heads year of manufacturing: 2017 with AVE capper year of manufacturing 1999 5. Heuft Basic inspection unit 6. Kosme labeller year of manufacturing 2018 7. Conveyors (mixed) 8. SMI LSK 30T shrink packer and tunnel packing format: 3x2 year of manufacturing 2005 9. Videojet 1530 date coder 10. Logopak case labeller year of manufacturing 2012 11. Robopac Roto ...
hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1
Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Compressor system / compressed air system composed of: Compressor Type STA-010 Maximum pressure 10 bar Output 0.9m³ per min incl. pressure tank 350l (14BAR) with filter
Screw Diameter: 140 mm // Throughput: 900 kg/h
Height=0.82 m, Overall length= 1.01 m, Overall width= 1.12 m, In store Made in Denmark Description Capacity of 800 – 1000 trays per hour 3 main brushes for cleaning made of polyamide 2 brushes for cleaning of perforated trays All brushes can be adjusted individually to prolong the lifespan Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes The whole machine can be cleaned with water External oil container with sight glass and circulation pump Mobil scrapings container
Materials: PP // Film Width (Max): 1600 mm
Screw Diameter: 92 mm // Throughput: 800 kg/h
Screw Diameter: 130 mm // Throughput: 800 kg/h
Screw Diameter: 58 mm // Throughput: 450 kg/h
Screw Diameter: 27 mm // Throughput: 100 kg/h
Number Of Stations: 32 // Output (caps/min): 500
Number Of Stations: 24 // Output (caps/min): 600
Output: 40000 U/h // Bottle Size: 0,5
Output: 15000 U/h // Bottle Size: 1500 ML
Output: 25000 U/h // Bottle Size: 2,5
Output: 9000 U/h // Bottle Size: 5ml-2l
Output: 10000 U/h // Bottle Size: 0,5
Air Pressure: 40 bar // Delivery Rate: 1630 m³/h
Air Pressure: 40 bar // Delivery Rate: 950 m³/h
An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.
output: 30 kW suction power: 4.200 l/min turning speeds: 5.092 U/min overpressure: 10 bar dimensions of machine L x W x H: 1,72 x 0,90 x 1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.
Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192
maximum number of results exceeded
please refine your search
