com used for sale

roll diameter: 700 mm roll length: 2200 mm rolls drilled: Kernbohrung Nip adjustment: hyraulisch 0 total power requirement: 160 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

USED COMTEIFA FT-12 BG CENTRIFUGE REF#: C5613 Used vertical axis basket centrifuge with upper discharge with filtering bag mounted on three feet (with compression straps and springs). Type FT-12-BG manufactured by COMTEIFA. AISI 316 SS wetted parts. General characteristics: Manufactured by COMTEIFA Model FT-12-BG Type Vertical basket top discharge centrifuge Material Stainless steel 316L Variable speed by frequency converter. Total opening All parts in contact with the product are made of AISI 316L stainless steel. Mounting on very strongly sized roller bearings. Bearing house of cast iron. Electric stop brake made by the converter. AISI 316L stainless steel lid with spring-compensated piston movement Technical characteristics: Download Manual above with bag Basket diameter 1,200 mm Height basket 650 mm Max. load 450 kg Useful load 350 dm3 Max. rotationa ...

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Binding press, completely made of stainless steel (frame & all rollers) Bandwidth 1450mm, L x W x H: 4450 x 2100 x 2450mm. Processing capacity with apples approx. 4-6 t/h. Year of construction 1994 Other fruits, berries and vegetables are also possible. No compressed air needed! No complex control necessary! Belt tension by means of 2 pcs. 5t. crank winches and 2 steel springs Very little trub in the juice because no shear effect of 2 bands! Rotary brush & 2 rotary high-pressure nozzles for belt cleaning. This press is an improved replica of an (Amos Compact cover press, see Prospeckt from Amos) in contrast to the Amos press, all rollers in our press are completely made of stainless steel and with continuous shaft (not only shaft stumps) as well as in the interior again amplifier discs to significantly increase the stability of the rollers. The rollers lurk on plain bearings t ...

Tricool 99 S2/50 chiller 50/S2/1617 stainless combi chiller on mobile skid, also with heating

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water requirements Water pressure: between 1 and 3 bar Temperature: between 5 ° C and 12 ° C

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl, ...

Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE

Robots industrial robots KUKA KR200-2 comp Built in 2007 Reach 2400mm Weight 1267kg Load 200kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

Robots industrial robots KUKA KR200L140-2 comp Built in 2007 Range 2800mm Weight 1267kg Capacity 200kg, 140kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

- Single head machine - Direction : R – L - Different bottle sizes - In very good condition

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Robots industrial robots KUKA KUKA KR100-3 comp safe­robot KRC2ed05 Year 2011 Reach 2400mm Weight 1155kg Load 100kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 4.14 Software safe­robot V1. 1.1 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850

C arm, monitor cart with dual monitor (TFT, 2 x) digital multi image storage (MX 200), good condition DICOM, 23 cm image intensifier

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm

Henkellikator COMAG Power 100 + 100 Pack/min The machine is double lane

Pester Pewo pack 250 compact The basic machine PEWO-pack 250 compact comprises the following assemblies (standard equipment): - Degree of protection : IP54 (ST) - Control cabinet : Swivel - Proximity Switch : Wenglor (ST) - Pneumatic version : Pneumatics (ST) - Traffic light indicator : Tricolor (ST) - Electrical version : Electrical standard S rev 15 - Frequency converter : Lenze (ST) - Product feed : straight in the middle Specifications: - Control unit HMI - Type : HMI 15" Pester Tangius (ST) - Control : Elau PacDrive - Voltage : 3x400V+N+PE, 50 Hz/60 Hz - Operating side : right - Protective cover : Acrylic glass (ST) - Paintwork : VA - Design (ST) - Packaging material - film : PE flat film - Documentation - Language : 2x French+1x CD - Documentation - Execution : Standard - Documentation - Supplier : 1x (ST) - Validation : Standard - Machine marking : F ...

COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...

Ziehm Exposcop 7000 Compact Specifications: 23 cm BV, digital CCD memory LIH, video printer , with single monitor, resolution 1.2 lpmm. Sending images via the BNC video output. 6 months warranty. Monitor test according to DIN 6868 Part 57 until 2025. Very space-saving only 1.48 m2! With integrated second monitor. KV / mA range: 0.1 mA / 40 kV to 5 mA / 120 kV, Dimensions L: 180cm, H: 180cm, W: 100cm.

Duplex Slitter rewinder Web width: 1400mm Unwind diameter: 800mm Rewind diameter: 500mm Maximum speed: 300m/min Integral unwind station with 76mm and 152mm air shafts Hydraulic roll lift and disc brake on unwind BST CLS Pro web guide unit for edge and line guiding Tension control via load cell mounted we path roller Infeed driven nip unit 3 motor dc drive system with analogue drive control Razor in grooved roller slitting station with several knife holders Edge trim removal fan Duplex cantilevered rewind with differential slip adapters Full width lay on roll assemblies with pneumatic application Side opening door for roll off loading with guard inter locks Off loading roll capstan unit Control panel with digital display and digital counter Electrical diagrams

with 16 filling valves and 1-head aluminium screw capperfor 28 mm closures capacity: approx. 2,000 fl./h running direction: left - right product: Juice (hot filling) with stainless steel control cabinet

Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition

Comprimo B.V. / Shell 5. Shell Claus Offgas Treating (SCOT) (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Downstream minimization (H2S recovery efficiency = 94.5%) in tail gas of Claus Units 1+3. Includes operation of 2 Incinerators. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput SCOT max. 90 t/d Offgas Throughput for each incinerator max. 11,4 t/d (2 Incinerators available) Operational operating temperature SCOT = 270 – 290°C (WABT = Weighted Average Bed Temperature) Operational operating pressure SCOT = 40 to 60 mbar Operational operating temperature Incinerators = 280 to 290°C Operational operating pressure Incinerators = 30 mbar 2015 – Replacement of complete quench tower C-3651 2022 – Decommissioning

The PEWO Pack 250 compact basic machine includes the following assemblies: - Alarm and status display of the machine in plain text format - Servo technology - Product-specific control of all servo axes, selectable via recipes on the HMI - Film monitoring, advance warning with visual and acoustic indication as well as machine stop at the end of the film or film tear - Closing beam driven by servo motor and spa operation - Pneumatically controlled hold-down device at the outlet - Height adjustment of locking beam and hold-down device - Sealing unit - Low-wear sealing system thanks to Teflon-coated sealing bar with precise temperature monitoring - Cylinder monitoring with fault indication on the HMI - Protection class IP 54 - Product protection, closing area secured by light barrier - Treadmill shutdown monitoring with automatic restart - Congestion switch with potential-free  ...

Leaching plant Riehle Comjet 101 Riehle flaudering machine (leaching machine+loading system) Type: Comjet for products such as pretzel, lye roll, lye knots, lye squirrels. minimum personnel input with maximum production volume adjustable belt speed Bandwidth 57 cm Embroidered trolley fully automatic elaudment process Lye shower Built in 2000 Footswitch Stainless steel cladding with 2 stainless steel wagons including 18 cloth pullers each Optionally you can buy up to 30 cars with 18 cloth pullers each

with 40 filling valves work directionl: left - right including safety housing and stainless steel enclosure

The Bio Mark 7 is the largest commercial cold press juicer we manufacture. It features a quick release hopper using two toggle latches, meaning the hopper chute can be removed in seconds and requires no gasket like other manufacturers. It has a Slim top body that still raises up to allow faster bag cleaning and a press only option. It also is our only juicer with a speed control option on the grinder allowing you to control the speed of the grinder. The Mark 7 is for serious cold press juice production and can easily upscale your juice production with simple controls and exceptional performance. apacity: 12 Kg per batch Output: 70 - 100 Litres per hour ( depending on recipe ) Power: Single Phase 240 Vac 50/60 Hz 3.75Kw 22.9 Amp IP66 Max Press Pressure: 3000 PSI Operating Press Pressure: 2200 PSI Motor Power: 5HP Hydraulic Rams: Two Weight: 400 Kg Dimensions: L: ...

; Gross weight [kg]: 2160; Inspection Date: 2025-10-13; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

Manufacturer: Xerox Model: Impika Compact Condition: Used Find more here - / Contact us at -

Specifications: 2 castors hydraulically adjustable 3 rollers driven Resistance torque: 80 cm³ Shaft diameter: 100 mm Roll diameter: 315 mm lateral hydr. Controlled arm correctors left and right CE. Mark Bending capacity square: 120 x 60 x 5 mm Bending capacity flat steel: 130 x 25 mm Bending capacity tube: 114.3 x 6 mm Bending power angle: 100 x 10 mm Round steel: 80 mm Motor power: 11 kW Control panel with digital display Dimensions (length x width x height): approx. 1750 x 1850 x 1650 mm Weight: approx. 3.6 tons Accessories: Various bending rollers Condition: we will still carry out a complete service on the machine The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.

Availability: immediately Hours: 0 Cup-Cake dosing line suitable for the production of round CUP-CAKES Ø 45 - 90 mm and small cakes (muffins, Magdalenas, Cake-Donuts, Mini-Cake Donuts, cake bars etc.) arranged on trays measuring 400x600 mm, with 6 x 9 wells. DESCRIPTION OF THE MACHINE: PART 1 No. 1 conveyor belt with plate chains, which is positioned at the entrance of the dosing line and serves as a buffer for about 4 sheets, with the following characteristics: ● Infinitely variable movement by means of a motor with frequency converter. ● Usable width: 600 mm. ● Length: 1500 mm. ● Mounted on wheels. PART 2 No. 1 Intermittent chain conveyor with slides, with the following features: ● Adjustable guide walls. ● Drive with a motor with frequency converter. ● Intermittent movement, electromechanically controlled, with programmable conveying step. ● Acceler ...

Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel