com used for sale

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

compressor compressor Copeland Stream, model

A complete unit is offered.

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Rational mobile ClimaPlus Combi combi steamer, model: CPC 201, serial number: E21CD04021107117, 400 V, 3 Ph, 50-60 Hz, 38 kW, dimensions: 660 mm x 470 mm x 1540 mm.

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

A used replacement stage type VML 60 is offered, see pictures. The compressor stage is in very good condition, see pictures. If you have any questions, please feel free to contact us.

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Comfee washing machine, model CFEW60-124, as a free-standing front loader. Due to the low device depth of about 40 cm, the Slim Line model is particularly suitable for smaller rooms and households. Technical features according to the manufacturer: • Capacity: 6 kg • Maximum spin speed: 1,200 rpm • Energy efficiency class: D • Dimensions: approx. 85 × 59.5 × 40 cm • LED display and start time preselection • Quick wash programs of 15, 30 and 45 minutes • Drum cleaning program Used condition with traces due to age and use. Scope of delivery and optical condition according to illustrations. The device has not been tested and is therefore expressly offered as an untested used product without functional promise. Auction-ID: A1-49796-315

Press force: approx. 1.5t/15kN Power: 1.1kW/8A Power supply: 230V Bale chamber approx. 730 × 500 × 930 mm Filling opening approx. 704 × 458 mm Bale size: approx. 700 × 500 × 500–700 mm Bale weight carton: up to approx. 30 kg Bale weight plastic: up to approx. 50 kg Cycle approx. 27 seconds Auction-ID: A1-49964-53

Vibrating plate trailer 1-axle. Equipped with Alko winch. Baking size: 115x140cm Auction-ID: A1-47389-386

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

Approx. 30 lfm shelf shepherd, type R 3000 Over 300 meters present as good as new, 50 cm depth present Negotiation price: € 2,330.00 net Offer consists of: Approx. 30 lfm shelf, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx.100 cm 31 pcs stand or frame, 2.3 m , galvanized 150 pcs. shelves, 100kg load/compartment, galvanized 7 St. Cross Associations for Stiffening. 5 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Visit possible at any time by appointment. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ong ...

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

Cylinder head DEUTZ FL612 complete with valves in exchange available from stock all prices per piece plus vat, price changes reserved.

We have 3 pieces of high-grade steel chimneys of the brand Hobatherm on camp model: Hobatherm high-grade steel chimney system Compactly Z-13.1.2-03.2274 Baucert construction year 2004 the chimneys were 2 years in a BHKW in use an application. the height of the chimneys amounts to approx. 20 m and they are provided with an isolation. price each, from camp 6,500.00 ? + VAT

Material: Steel We are going to overhoul this machine before the delivery. You can also get the entire system with all components you need.

Compressor KAESER 10 bar power 90 KW

Manufacturer:ZM Zwickauer Maschinenfabrik Year: 1993 Power: 30 kW Allowable Operating Pressure: 8 bar Rotation speed: 5870 1/min Technical data of supply fan: Manufacturer: ILKA VEB Turbowerke Meißen Type: Lann 500 Year: 1991 Weight: 28 kg Flow: 1,43 - 1,94 m^3/s The total increase in pressure: 358 - 177 Pa Fan rotation speed: 1450 1/min Power: 0,7 kW Technical data of motor: Manufacturer: VEM Elektromotorenwerke Thurm Type: YP 1G4 Rotation speed: 1380 obr/min Power: 0,75 kW Voltage supply: 220/380 V 50 Hz The current consumption:3,45 / 2,0 A Weight: 11 kg Technical data of transformer: Manufacturer: TuR Transformatoren und Rontgenwerk Type: SVS 372 Year: 1991 Power: 37 kW Voltage supply: 380 V Control voltage: 220 V Nominal current: 72 A

Composite plant Fabrikat Linde, 45kW at minus 10C evaporation, with control box, with 3 pcs. compressor Bitzer, type 4DC-5.2Y, Y.O.M.: 2004, with refrigerant R404A

NEW MACHINE With Formatschiebetisch 2, 60m Saw blade 250-315 mm Swivel: 90 °-45 ° Planing width 410 mm 4 cutter Blade (no setting more) Dressing table length of 1800 mm Clearance height of 4-225 mm Milling cutter: 90 °-45 ° swivel to the rear Blower rpm: 3000/4000/5000/6000 / 8000 and 10000 RPM Vertical lift 160 mm Engine power: 3 engines 3 KW400 V (4,0 PS) S1 100% continuous operation WJ-500300 Special price: NET Options: Before scoring unit with motor Guide fence 900 mm Integral safety rail 500 mm Westcott Chuck 0-16mm Milling Eccentric clamp Right - and left-hand rotation (BUR) Engine 4.0 KW (5.5 HP) S1 100% Planer blade 410 HSS G & WJ-BA-410-HSS

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 320mm 3 Knife shaft reversible knife (no more adjustment) Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation WJ-500200 SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Planing knife 320 HSS G&WJ-BA-410-HSS

We offer from stock Zeven: DEUTZ F6-8L 613 cylinder heads completely with valves + spring newly assembled. MIW GmbH Motoen-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven / Germany Phone: 0049(0)4281-950583 fax : 0049(0)4281-950585 info@miw-zeven.de abc.MIW-ZEVEN

Article: Black rubber Compensator Manufacturer: Wanda Type: black with length limiter Condition: used, very good Model: DN 100 PN 10/16

Wood machining center WJ-CU-32 400V 3-motor 4 KW (5.5 HP), Formatschiebetisch 2300mm, square table with telescopic and the back fence a usziehbar as a guide fence-45 ° / 90 ° / + 45 ° (swivelling) can be used. Saw unit 90 °-45 ° swiveling Doppelaufhaengeung of the unit. Saw blade 250-315 mm. Parallel cutting width 860 mm, Speed of up to 4000 rpm, Before scoring unit with motor, tiller 30s spindle, Usable height 125 mm, 90 °-45 ° to the rear swivel, Double suspension of unit, Rpm: 3000/4000/5000/6000/8000 and 10000 RPM.,. Diameter of table opening of 260 mm, dressing planing width 320 mm, length 1500 mm, Paralleiogrammverstellung of tables, Dual opening system of the tables in the back, Planing fence 90 °-45 ° swiveling,. 4-225 mm, passage height Feed speed of 8 m / min., Dust nozzle 120 mm, all units and tables from MASCHINENGRAUGUss! G & WJ-CU320N s ...

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

Compact tractor with selectable four-wheel drive, infinitely variable hydrostatic travel drive, Diffentialsperre, 3-cyl.-Kubota diesel engine, 15 kw/20 HP EZ 5/95, only about 350 hours of operation, cabin, heating, power steering, turf tyres, Front hitch, front PTO, 2 x hydraulic connections front. Rear three point linkage, rear PTO 540/1,000 rpm. Complete with vehicle and good battery! Needs service, otherwise good machine. Price ex. export € 7.900 / / in Germany plus 19% VAT price € 9.401,- Equipment optional at extra charge available, E.g. snow blade, broom, centrifugal spreader roller spreader. We supply used winter maintenance technology - Holzhäcksler - engines and more - see photos!

Compressor Make: BITZER Type: OSN7461-K Conveyor volume: 110-303 m3/h Speed: 1450-4000 rpm. Electric motor: 2900rpm Make: SCHORCH Type: KF5200L-AB019-06T IEC 200L IMB3 Power: 55 kW Price on request Contact details can be found under Contact

Compressor valve in Exchange

Compressor valves in Exchange

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Verdriessen parent! Compensation module for Schaltschrnk (control panels available, sep. ask) with electronic circuit! each module 3 x 225 kvar compensation performance! Capacitors Fab Rodensteiner 12 modules available - a ´ module 440.-information at 0170 / 2204056 Mail to fa.raupp@t-online.de

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces fre ...

SACMI line for one and for two component caps, with control video system.

Weibert W7-32 professional new 5 x combination machine It should already be a Waleed! new Formatschiebetisch Pro 2300mm planing width: 320 mm Engine power: 3 400V Motors 3 KW (S1) Dressing table length: 1500 mm Drum: 3-knife-shaft of turn of the Opening of 4-230mm Cutting height: 103 mm blade 315 mm Swivel 90 °-45 ° Milling cutter: starr 90° Blower rpm: 1400/3500/6000 and 8000 U/min SPECIAL PRICE for questions regarding the machine tel. 01717100222 or 06024-80707