We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,892 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
• DIBAL MD-3500 600X400 reject metal detector. Designed with ease of operation, low maintenance and cost. • Metal detectors are considered a critical control point (CCP) in HACCP programs and require detection checks to make sure they meet their standards. Smart Guide conducts detection and operation checks in an easy-to-understand format. It can be configured to stop operation if the test fails and ensures compliance. • Confirmation of rejection Contaminated products must not only be detected but also properly rejected. Rejection confirmation ensures that rejected products are completely removed from the production line. • Detection arch measurements: 600 mm wide x 240 mm high x 460 mm wide. • External dimensions of the machine: 2040 mm long x 1100 mm wide x 1600 mm high. • Ribbon size: 2040 mm long x 500 mm wide (hinges) •OCCASION. NEGOTIABLE PRICE. Transport costs ...
used
Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.
used
Salvagnini P4 Year of manuf. 2007 Configuration: HPT201516 MZR Machine consists of: 1. Automatic plates feeder 2. Automatic bending unit 3. Automatic bend products receiver Max sheet thickness: mild steel 410 N/mm2: min. 0,5mm - max 2mm stainless steel 600 N/m2: min. 0,5mm - max 1,25mm aluminium 265 N/mm2: min. 0,5mm - max. 3mm Min and maximum dimensions of sheet material: L min./max.: 405 / 2000 mm W min./max.: 190 / 1524 mm max diameter 2150 mm centring dim. 2000mm Machine including bending tools
used
MACHINE IS GREAT WORKING CONDITION . INCLUDING TOOLINGS WEIGHT: 4300 KG YEAR: 1991
used
350 x 200mm aperture. 300m conveyor width. 1.8m long. Push reject system. Right to left production. Full supermarket spec. 880 Line height with adjustable feet.
used
550 x 160mm aperture. 400mm conveyor width. 3250mm machine length. 900mm line height with adjustable feet. New belt fitted on the machine. Right to left production. Full supermarket spec.
used
Two cutting speeds - Vice with counter-clamping device - Infinitely variable mitre adjustment (-45° to +60°) - Coolant device - Material support roller - Pin chip remover and chip drawer
used
350 x 120mm aperture. 300mm conveyor width. 900mm line height. Left to right production. Stop on detect, but can also install a reject system to bring to M&S spec. 1170mm total machine height.
used
Used automatic tape saw Brand: DOALL Model: C-520-NC Round cutting capacity: 520mm Cutting capacity: 520x520mm Saw speed: 0 - 100 m / min Dimensions of the saw blade: 6400x54x1.3mm Motor power: 8.2KW
used
Power: 1.8/1.5 kW Power supply: 400v/3/50hz Weight: 600 kg Size: 970 X 2000 X 2000 Cutting Capacity: 260 (Round) | 250 (Square) | 320 X 200 (Rectangular) Blade size: 3150 x 25.4 x 0.9 mm Year 2002
used
450 x 160mm aperture. 300mm conveyor width. 1800mm machine length. 870mm line height. Left to right production.
used
350 x 115mm aperture. 300mm conveyor width. 1.3m machine length. Air reject system. 1.3m machine length. Adjustable line height with wheels.
used
370 x 160mm. 310mm width conveyor. 760mm line height with adjustable legs. 1200mm long. Left to right production. Ferrous in foil.
used
350x100mm aperture. 280mm conveyor width. 900mm line height, adjustable legs. Left to right production. Air or push reject system. 2300mm total machine length.
used
370 x 100mm aperture. 300mm conveyor width. Right to left production. Reject system. M&S Spec. 2100mm long 840mm line height with adjustable feet.
used
300x160mm aperture. 250mm conveyor width. Left to right production. Supermarket spec. 900mm line height with adjustable feet. 2600mm machine length. Full electrical rebuild completed.
used
350 x 130mm aperture. 870mm line height. 1600mm machine length. Supermarket spec. New belt and reject system. Left to right production.
used
Behringer HBP 430a Rect-Cap (H) 431.8 mm Rect-Cap (W) 431.8 mm Rounds-Cap 431.8 mm Square-Cap 431.8 mm Power 5.5 kW Type (Auto, Manual, Semi) Auto Blade Width 50.8 mm Blade Thickness 1.6002 mm Blade Length 5,791.2 mm
used
Usable aperture – 355mm x 160mm. Conveyor width – 300mm. 1.5m long. 90cm high. Left to right production.
used
1 x Brand new CEIA THS21 Metal detector head.
used
Usable aperture size 360mm (wide) x 110mm (high). 300mm wide conveyor belt. Full length 2,500mm. Line height 900mm. Stop on detection. Left to right production direction.
used
used
Usable aperture size 350mm (wide) x 135mm (high) 230mm wide conveyor belt Full length 2500mm Line height 850mm Auto push reject on both machines. Left to right production direction
used
350 X 110mm usable aperture. 260mm conveyor width. 920mm line height. Twin head metal detector with reject. M&S Spec. Right to left production line.
used
Usable aperture size 550mm (wide) x 200mm (high) 450mm wide conveyor belt Full length 2000mm Line height 860mm Right to left production direction
used
450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.
used
Motorized sheet metal bender Useful length 2000mm Maximum bending of iron sheet at 2000mm 3mm thickness
used
250 X 155mm aperture. 190mm conveyor width. Air reject system. 1030mm Line height. Left to right production direction. M & S Spec.
used
450 x 155mm aperture 400mm conveyor width. 920mm line height with adjustable feet. 1800mm machine length. Right to left production. Drop reject system.
used
Capacity ø300mm Double-sided miter 45gr left 60gr right Equipped with mist lubrication
used
Capacity: 240 x 280mm Double sided miter Semi-automatic Mist lubrication system
used
Type: Condor 370 SA-HY Manufacturer: TCM Location: Czech Republic Description: We offer the Condor 370 band saw.
used
The saw is in good technical condition. Machine weight 780 kg By prior arrangement, the possibility of a tour in progress.
used
The machine is in good technical condition. Round material 260mm. Maintained regularly. Can be shown in operation.
used
Capacity: 200 x 250 mm good condition video available
used
Capacity 350 x 270 mm Material probe Two sided miter
used
Max. cutting diameter - 90° (logs): 260 mm Max. cutting diameter - 90° (square): 260 x 400 mm Capacity around maximum diameter:: 260 mm Maximum degree angle:: 400 Saw band size: : 4640 x 34 x 1.10 mm
used
Hydraulic Pedrazzoli band saw, complete with automatic advancement, new electronics, video touch, hydraulic descent speed variator and belt speed variator
used
Sheet metal storage tower, 26 compartments, Stopa, format 2500x1250mm – second-hand - : Price from location: 24.500.-€ (net), plus dismantling etc.! Manufacturer: Stopa Type: Tower Year of construction: 1996 Space Requirements: Width: 4200mm, Tower depth: 3950, with carriage outside: 5600mm or more depending on rail length Height: 6725mm Load capacity per cassette: 3,000kg Storage locations: 26 Storage capacity: 78 tons. Sheet size: 1,250 x 2,500mm Condition: good, has been serviced annually by Stopa Available: Dismantling: week 30 2024, Location: Switzerland, 1950 Sion For dismantling: 3T indoor crane and 4T forklift are available free of charge (without driver, who must have a valid driver's license for these machines).
used
355 x 200mm aperture. Usable aperture of 155mm. Conveyor width of 300mm. 850mm line height with adjustable feet. 475mm weigh pad length. Right to left production. M&S spec machine.
MAX 20 X 1600
new
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
used
Semi-automatic, 90 degrees Quick-release system Cooling pump Including short roller conveyors
used
Semi-automatic Double-sided miter inpsection possible video available
used
REF-0 FORTRESS PHANTOM PIPELINE METAL DETECTOR Metal detector for the inline inspection of pumped liquids and viscous products Manufacturer: FORTRESS Model: PHANTOM Year: 2011 Inside pipe diameter: 95mm. Overall dimensions: width 900mm, length 800mm, height 1,200mm.
used
Capacity 263 x 400 mm Double column Single-sided miter Cooling pump
used
Capacity: 330 x 510 mm Single sided miter Variator speed setting Semi-automatic (self-lowering and rising)
used
Capacity 275 x 230 mm Manually operated, with bag cylinder Cooling pump Quick-release clamp
used
80 x 160 mm aperture. 80mm wide conveyor belt. 1730mm machine length. 830mm line height. Auto push reject. Left to right production.
used
Warehouse number: 3726 SHEET METAL BENDING MACHINE Manufacturer: SCHROEDER , Type: 2500 x 2.5 mm Machine NO.: 6290, Year of construction: 1987 Specifications: Size bending length 2550 mm Size sheet thickness 2.5 mm Program-controlled backgauge. Siemens - 1000 mm Control Siemens Fabr. Touchscreen Mechanical. Accessories: Length: 2000 mm, Høhe: 1700 m0, Width: 3100 mm, Weight: 2600 kg