129,242 used machines on RESALE, but how to find them? Machine Search
CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz
material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KOLZER DGK 36SV vacuum metallizer was built in 2016 in Italy by Kolzer s.r.l. The machine on offer enables various types of components, i.e. plastics, glass, cups and automotive parts, to be coated with decorative or functional coatings. These coatings give the workpieces a characteristic metallic, mirror or gold effect. The machining process is performed in a deep vacuum. Inside a large chamber, there is a tungsten spiral into which small rods or wires of conductive metals are inserted. A high-power current is passed through the spiral, causing it to heat up to 1500°C. This temperature causes the material to melt and generate vapour. The vapour then spreads out as a cloud of atoms and is evenly deposited on cold objects (cups, foils, packaging), forming a thin metallic layer. The entire cycle takes between 4 and 6 minutes. The thermal evaporation method used in the PVD (Physical ...
Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.
350 x 200mm aperture. 300m conveyor width. 1.8m long. Push reject system. Right to left production. Full supermarket spec. 880 Line height with adjustable feet.
550 x 160mm aperture. 400mm conveyor width. 3250mm machine length. 900mm line height with adjustable feet. New belt fitted on the machine. Right to left production. Full supermarket spec.
350 x 120mm aperture. 300mm conveyor width. 900mm line height. Left to right production. Stop on detect, but can also install a reject system to bring to M&S spec. 1170mm total machine height.
450 x 160mm aperture. 300mm conveyor width. 1800mm machine length. 870mm line height. Left to right production.
350 x 115mm aperture. 300mm conveyor width. 1.3m machine length. Air reject system. 1.3m machine length. Adjustable line height with wheels.
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa, metal saw band Bitec M42 Plus unused -Dimension: 2450x27x0.90 mm 4/6 -Number: 7x sheets available -Price: per piece -Weight: 0.5 kg/piece
370 x 160mm. 310mm width conveyor. 760mm line height with adjustable legs. 1200mm long. Left to right production. Ferrous in foil.
350x100mm aperture. 280mm conveyor width. 900mm line height, adjustable legs. Left to right production. Air or push reject system. 2300mm total machine length.
370 x 100mm aperture. 300mm conveyor width. Right to left production. Reject system. M&S Spec. 2100mm long 840mm line height with adjustable feet.
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa Bitec Plus metal saw band unused -Dimension: 4250x34x1.10 mm 4/6 -Number: 5x sheets available -Price: per piece -Weight: 1.3 kg/piece
300x160mm aperture. 250mm conveyor width. Left to right production. Supermarket spec. 900mm line height with adjustable feet. 2600mm machine length. Full electrical rebuild completed.
350 x 130mm aperture. 870mm line height. 1600mm machine length. Supermarket spec. New belt and reject system. Left to right production.
Metal band saw, band saw machine, vertical band saw -Passage width: 380 mm -Passage height: 230 mm -Table: swiveling -Speeds: 12 pieces min: 45 rpm max: 800 rpm -Dimensions: 1150/715/H1900 mm -Weight: 522 kg
Metal band saw blade, band saw blade, metal saw band -Quality: unused, original packaging -Toothing: 3/4 K-POS -Price: per piece -Number: 6x sheets available -Dimensions: 3830x27x0.9 mm -Weight: 0.8 kg/piece
Usable aperture – 355mm x 160mm. Conveyor width – 300mm. 1.5m long. 90cm high. Left to right production.
Usable aperture size 360mm (wide) x 110mm (high). 300mm wide conveyor belt. Full length 2,500mm. Line height 900mm. Stop on detection. Left to right production direction.
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 30 mm -Load capacity: kg -Dimensions: 250/100 / H460 mm -Weight: 20 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 35 mm -Load capacity: 4 t -Dimensions: 230/110 / H450 mm -Weight: 22 kg
Usable aperture size 350mm (wide) x 135mm (high) 230mm wide conveyor belt Full length 2500mm Line height 850mm Auto push reject on both machines. Left to right production direction
350 X 110mm usable aperture. 260mm conveyor width. 920mm line height. Twin head metal detector with reject. M&S Spec. Right to left production line.
Metal band saw blade, band saw blade, metal saw band -Metal saw band: SG 2/3P x 0.9 unused -Length: 4115 mm -Weight: 1.2 kg
Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg
Usable aperture size 550mm (wide) x 200mm (high) 450mm wide conveyor belt Full length 2000mm Line height 860mm Right to left production direction
450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.
Stacking boxes, stacking boxes, steel boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -Sheet metal container with: lid -Dimensions: 615/800/H910 mm -Weight: 54 kg
Metal band saw blade, band saw blade, metal saw band -unused in: original packaging -Dimensions: 2625 x 20 x 0.9 mm -Toothing: 6/10 ZpZ W -Price: per piece -Number: 7 pieces -Weight: 0.4 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg
250 X 155mm aperture. 190mm conveyor width. Air reject system. 1030mm Line height. Left to right production direction. M & S Spec.
450 x 155mm aperture 400mm conveyor width. 920mm line height with adjustable feet. 1800mm machine length. Right to left production. Drop reject system.
355 x 200mm aperture. Usable aperture of 155mm. Conveyor width of 300mm. 850mm line height with adjustable feet. 475mm weigh pad length. Right to left production. M&S spec machine.
80 x 160 mm aperture. 80mm wide conveyor belt. 1730mm machine length. 830mm line height. Auto push reject. Left to right production.
Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame: 738 x 535 mm -Price: per piece -Number: 5 pieces -Dimensions: 738/535/H10 mm -Weight: 1.6 kg
maximum number of results exceeded
please refine your search
10 € 
