collection table used for sale

Offer 24585 Hydr. Welding Rotary and Tilting Table - Three Axis - Welding Manipulator Technical data: - Max. load capacity 3000 kg - Face plate diameter 1100 x 1100 mm - Face plate with hydraulic lifting + swivelling + tilting - Rotary movement electr. infinitely variable 0.01 - 1 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V - Connected load 5.5 kVA - Min. table height in horizontal position approx. 1200 mm - Max. table height in horizontal position approx. 1980 mm - Handheld remote control - E - Footswitch - Space requirement approx. W 1700 x H 1300 x D 2950 mm - Weight approx. 4000 kg

Lg.Nr. 26071 Technical data: - Load capacity 650 kg - Face plate dimensions 700 x 700 mm - Face plate mot. infinitely tiltable 0 - 135 ° - mot. Rotary movement infinitely adjustable 0.07 - 1.5 rpm - Table height in horizontal position 890 mm - E. Control button - Space requirement approx. W 850 x H 890 x D 1200 mm - Weight approx. 400 kg

-3 tables, dimensions per table approx. 160x80x74 cm -Including 12 Muuto chairs Auction-ID: A1-45973-23

\"Length: approx. 1,200 mm Width: Approx. 700 mm Height: Approx. 1,100 mm 318 volt input voltage Max. power: 225 amps\" \"For welding aluminum Incl. various tail wires\" Auction-ID: A7-45983-113

round meeting table high-quality as good as new 160cm diameter Auction-ID: A1-45889-2770

Round distribution table / indexing table (Ageha-Zeatz) with manual operation. Auction-ID: A1-45979-48

6Tables width 50cm 4Benches with backrests 11Benches without backrests Auction-ID: A1-45889-557

without hydraukikaggreget without electrics The device is therefore sold as defective Auction-ID: A1-45977-18

Table white dismantled plate engineered wood Feet made of aluminium screwable 60 x 120cm Auction-ID: A1-45889-2624

2t lifting force Platform checker plate Approx. 2x1.25m Foot condition Auction-ID: A7-45983-138

Side table HAY DLM XL white Slight signs of wear Auction-ID: A1-45889-2805

without hydraukikaggreget without electrics The device is therefore sold as defective Auction-ID: A1-45977-19

White lacquered white bridge table with plexiglass insert (10cm wide) and footstay Auction-ID: A1-45889-457

Side table HAY DLM XL white Slight signs of wear Auction-ID: A1-45889-2778

Table top with storage compartment on two sides – three-part – panel material white with ABS edge – size of the table top 80 × 80 – without table foot – on pallet – function see picture Auction-ID: A1-45889-2757

Tuuba Plexiglass Cylinder can be used either as a ceiling lamp or side table Both can be illuminated For ceiling lamp, suspension device and partly socket for incandescent lamp is supplied High-quality workmanship, perfect condition – design piece Pallet for exchange Auction-ID: A1-45889-2807

Heavy machine table / clamping table with T-slots and lifting eyes, suitable for clamping workpieces on milling machine or machining center. Size: 800x800x600mm. Auction-ID: A1-45979-24

4 x Omolon plexiglass table packed in cardboard box 45 x 45 x 110 cm without. Lighting Auction-ID: A1-45889-2628

Cutting depth: approx. 300 mm Foot operation on pallet Auction-ID: A7-45983-54

Heavy machine table / clamping table with T-slots and lifting eyes, suitable for clamping workpieces on milling machine or machining center. Size: 800x800x600mm. Auction-ID: A1-45979-25

Consisting of 6x table 120x80cm, approx. 26 chairs (wooden seat/backrest on metal frame) Auction-ID: A1-45979-436

Platform size: 3000 x 1050 mm Load capacity estimated: 2 to\" foot control Auction-ID: A7-45983-55

Holzmann KAM 55V Manual Lanten Glue Machine incl. Tools, Work Table, Vacuum Cleaners in Metal Box Clean, little-used condition Function untested Auction-ID: A1-45889-2821

Operating pressure 110 bar IP 55 Auction-ID: A1-45977-17

Transport width: 1050mm Length: 3x 1600mm Roll diameter: 90mm Chain drive via worm gear motor Auction-ID: A7-45983-58

Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Translated with

sliding table length: 3200 mm; cutting width at the fence: 1350 mm; cutting width at the cross cut: 3200 mm; cutting depth: 125 mm; scoring unit: ja; sawblade diameter: electric; tilting adjustment sawblade: electric; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 400mm; number of speeds: 3000 / 4000 / 5000 U/min; motor power: 7 kW; motor brake: yes, automatic; suction connection: 80mm und 120mm; machine length: 3400mm; machine width: 2000mm; weight: 900kg;

sliding table length: 3200 mm; cutting width at the fence: 1250 mm; cutting width at the cross cut: 2800 mm; cutting depth: 120 mm; scoring unit: no; height adjustment sawblade: Handrad; tilting adjustment sawblade: Handrad; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 450mm; number of speeds: 4; motor power: 5,5kW; motor brake: no; suction connection: 80mm und 120mm; machine length: 3200mm; machine width: 1900mm; weight: 1000kg;

GeneralUniversal milling machine in monoBLOCK construction; Control: 3D Control Heidenhain iTNC 530 HSCI Technical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minWorking area 1Longitudinal1150 mmCross710 mmVertical710 mmTool changerApplicationVertical Tool changer planevertical Type of gripperPick up Number of tools32 MiscellaneousClamping SystemHSK-A 63 Floor space/WeightDimensions (L x W x H)6,0 x 5,0 x 2,7 (7,0 x 5,5 x 3,5) mWeight approx.10700 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC rotary table integrated in rigid tableType of Measuring system Direct measuring systemMotor spindle 10,000 rpmMotor spindle SK 40 10,000 rpm4. Axes (swivelling range) +/- 360/000,1 degreeRotation speed max.4. Axis 30 rpmDistance between T-Slots 63 mmNumber of Slots 11Slot width 14 ...

sliding table length: 1500 mm; cutting width at the fence: 700 mm; cutting width at the cross cut: 2200 mm; cutting depth: 100 mm; scoring unit: no; adjustment sawblade height: manuell / Kurbel; adjustment sawblade tilting: manuell / Kurbel; adjustment fence: manuell; read out sawblade tilting: Digital; read out cutting height: -; read out fence: Scala; read out crosscut: Scala; saw blade diameter: 315 mm; number of speeds: 1; motorpower: 4 kW; motor brake: ja - automatisch; suction connection: 80 mm und 120 mm; machine length: 3000 mm; machine width: 1700 mm; weight: 900 kg;

sliding carriage length: 3200 mm; cutting width with rip fence: 1200 mm; cutting width at the cross cut: 3450 mm; Schnittiefe: scoring unit: yes; height adjustment: manual / crank; tilt adjustment: manual / crank; rip fence adjustment: manual; display saw blade tilt: digital; display saw blade height: -; display rip fence: scala; display at the cross cut: Scala; saw blade diameter: speeds: 3200 / 4200 / 5000 U/min; motor power: 5 kW; motor brake: yes - automatically; suction connection: 80 mm and120 mm; machine length: 3350mm; machine width: 1800 mm; weight:

Offer 23351 Technical data: - max. Load capacity 750 kg - Face plate diameter 700 mm - min. table height in horizontal position approx. 750 mm - Max. table height in horizontal position approx. 1390 mm - Working height in 3 steps manually height-adjustable - Face plate mot .rotatable + swivel or tiltable - Rotary movement electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Handheld remote control for direction of rotation, swivel or tilt - E. footswitch - Space requirement approx. W 1500 x H 750 x D 800 mm - Weight approx. 500 kg

Offer 23353 Hydr. Welding Rotary and Tilting Table - Three Axis - Welding Manipulator Technical data: - max. Load capacity 750 kg - Face plate diameter 700 mm - min. table height in horizontal position approx. 750 mm - Max. table height in horizontal position approx. 1390 mm - Working height in 3 steps manually height-adjustable - Face plate mot .rotatable + swivel or tiltable - Rotary movement electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Handheld remote control for direction of rotation, swivel or tilt - E. footswitch - Space requirement approx. W 1500 x H 750 x D 900 mm - Weight approx. 700 kg

Offer 25074 Technical data: - Load capacity horizontal position 600 kg - Face plate diameter 1000 mm - Face Plate mot. Swivel - Face plate speed electr. Infinitely variable - Welding current transmission 500 A - Drive 400 V - Table height in horizontal position 900 mm - Footswitch - Space requirement approx. W 1000 x H 900 x D 1350 mm - Weight approx. 450 kg

Edmo Lift Hydraulic Scissor Lift Table, Load Capacity 2000kg, Lifting Height: 1000mm Auction-ID: A7-46048-114

Stored in working condition, buyer must provide transport himself. Elevator available. Auction-ID: A3-43519-17035

spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support

spindle diameter:150 mm x-travel:3.000 mm y-travel:2.000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 mm column travel:1.500 mm high speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/min table surface area:2.000 x 2.500 mm max. table load:25.000 kg rapid traverse speed:5/10 m/min feed speeds:1 - 1.500 mm/min faceplate speeds from - to:3,2 - 140 U/min dimensions of the machine ca.:8,4 x 6,8 x 5,9 m weight of the machine ca.:57 t total power requirement:100 kW Full B-axis Aerostatic guides Coolant system with IKZ

table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

spindle diameter:150 mm x-travel:3000 mm y-travel:2000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 column travel:1500 mm spindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/min table surface area:2000 x 2500 mm max. table load:25000 kg rapid speed:5 / 10 m/min feed speeds:1 - 5000 mm/min total power requirement:100 kW weight of the machine ca.:57 t dimensions of the machine ca.:8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply

spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-axis:1520 mm w-axis:1000 mm table surface area:2000 x 1800 mm workpiece weight:8 t spindle motor:18 kW spindle taper ISO:50 spindle turning speed range:4,5 - 900 U/min faceplate diameter:785 mm rapid traverse:5 m/min total power requirement:40 kW dimensions of the machine ca.:5,5 x 6,9 x 5,2 m weight of the machine ca.:35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster

spindle diameter:120 mm x-travel:1250 mm y-travel:1250 mm z-travel:800 mm W-axis (spindle longitudinal):600 mm Speed of boring spindles:1- 2000 U/min. spindle taper ISO:50 table surface area:1000 x 1000 mm total power requirement:55 kW weight of the machine ca.:18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders.

Sliding table saw Brand: Panhans Type: 680 100 New machine Technical data: Trolley length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90 ° 105 mm at 46 ° Cut width Width stop 1030 mm Saw blade max. Ø 450 mm Saw blade under table retractable Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus. 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000/4000/5000/6000 rpm Net weight approx. 1051 kg Technical description: Solid German mechanical engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body manufactured as a stable frame welded construction from thick-walled steel profiles, laser-processed sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is built on the  ...