collection table used for sale

heavy 40s Gillardon with cross table

Stainless steel plastic work table PAGUS table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! replaceable shelf cable duct at the back Dimensions: 1300 x 700 x 790 mm

• Conveying height 1,290 mm • Inlet height 620-780 mm • Tablet diam. 3-25 mm • Deduster path total length 15 m • Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h • 2 inlet adapters: rectangular 115x80 mm and round with diam. 60 mm nozzle • Programme control C920 with HMI Allen-Bradley Panel View Plus 600 • Distributor V4000 with 6 outlets, automatic/manual change of outlets selectable via HMI • Metal check Lock Met 30+ with its own HMI • Bad ejection into glass container • PLC Allen-Bradley MicroLogix • Drive 100-240V/50/60Hz • Nozzle for dust extraction • Mobile

Rail guide table, linear unit STAR (REXROTH) 1460-405-00 ID no. 73449 Working area approx. 0...600 mm table: 450 x 320 mm Drive shaft: Ø 16 mm used, tested ! Dimensions: 1480 x 360 x 90 mm

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1250 mm z-travel: 1600 mm spindle taper ISO: 50 bore spindle stroke: 710 mm main drive motor: 11 kW turning speeds: 1600 U/min Feed: 4000 mm/min Control: Heidenhain type: TNC 135 T-slot - width: 22 mm T-slot - distance: 140 mm table surface area: 1250x1400 mm Table load: 2500 kg total power requirement: 23 kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2000 mm z-travel: 2330 mm spindle taper ISO: 50 bore spindle stroke: 1000 mm turning speeds: 900 U/min Feed: 2500 mm/min Control: Heidenhain type: TNC 131 T-slot - width: 28 mm table surface area: mm Table load: 8000 kg total power requirement: kW weight of the machine ca.: 37,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rail guide table, linear unit STAR (REXROTH) 1460-405-00 ID no. 99357 Working area approx. 0...1300 mm table: 320 x 320 mm Drive shaft: Ø 19 mm used, tested ! Dimensions: 2050 x 375 x 90 mm

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 1600 mm z-travel: 1250 mm Control: Heidenhain type: TNC 426 table surface area: 2000x1600 mm Table load: 12500 kg Rotary table: 360 ° spindle turning speed range: 12-3000 U/min Feed: 1-9999 mm/min Rapid movement: 10000 mm/min total power requirement: 80 KVA weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rail guide table, linear unit STAR (REXROTH) 1460-305-00 ID no. 60221 working area approx. 0...380 mm table: 320 x 225 mm drive shaft: Ø 14 mm with limit switch and position sensors ! used, tested ! Dimensions: 830 x 410 x 95 mm

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Work Table, Clamping Table, Welding Table, Machine Table GEORG 5400 mm Box profile: 160 x 90 mm Height: 760 mm Center groove over 8 profiles 40 x 25 mm Dimensions: 6350 x 1000 x 760 mm Weight approx. 4 ton

turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping surface: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm Hole spacing at the base: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

Universal clamping table, swivel, tilt and swivel table, T-slot plate PAGUS clamping surface: 630 x 270 mm 5 grooves groove width: 12 mm table can be tilted back and forth from 90°, tilted back and forth by 30° table can be tilted left and right by 15° and swivelled to the left and right by 45° New !' Dimensions: 650 x 290 x 290 mm

Magnetic clamping table, electric PAGUS Ø 500 mm outer diameter: Ø 500 mm Operating voltage: 24 V DC current consumption: 6,00 mm 2 A Insulating surface: Ø 55 mm Contact diameter: Ø 16 mm Contact spacing: 28 mm Flange diameter: Ø 235 mm Bolt circle diameter: Ø 270 mm 4x Threaded hole: M16 x 2.0, depth: 28 mm used, tested ! Dimensions: 500 x 500 x 90 mm

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

Coordinate table - rotatable BAZUS Table size 700 x 400 mm Clamping area 330 x 580 mm 3 T-slots 12 mm Travel distance approx. 400 mm Scaling 0.05 mm 1 spindle rotation = 4 mm swivel 360° with locking mechanism Overall height 195 mm Max. table load approx. 100 kg max. working pressure approx. 500 kg Dimensions L - 850 x W - 400 x H - 195 mm Weight approx. 172 kg original packaging - year of construction estimated - New - unused - - 1 piece in stock -

Offer 24518 Specifications: - Load capacity 150 kg - Pick-up crosses + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotary movement infinitely variable - Right.- Counterclockwise rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg

Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Specifications: Clamping plate dimensions: 2050 x 1000 mm Panel thickness: 170 mm T-slots: 15 / 25 mm Dimensions (length x width x height): approx. 2050 x 1000 x 170 mm The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Used Fette tablet press model Perfecta 3000. 45 station. Initial pressing force 230 Kn. Main pressing force 100 Kn. Max tablet diameter – 16 mm. Max tablet filling depth 18 mm. Capacity 486000 tablets/hour. EU-B 19 mm tooling with the machine. Machine manufactured in 1995, overhauled in 2004.

Table milling machine HOLZKRAFT t 45c LL With table extension on the right and left, as well as pull-out workpiece support ---------- Technical data ---------- Table size: 1,945 x 695 mm, max. spindle protrusion over table: 130 mm, useful length milling spindle: 100 mm, max. retractable milling cutter Ã: 180 mm, speeds: 3,500 / 7,000 / 10,000 rpm, motor 400 V: 6.6 hp / 5.0 kW, suction nozzle Ã: 2 x 120 mm - special price - - new exhibition machine -

Key data: 400 mm, 40 mm

- incl. key Specifications - Table diameter: 400 mm - Table height: 40 mm - Rotation range: 360° - Pan/tilt range: 0 - 90 ° - Max. load capacity (horizontal table): approx. 200 kg - Max. load capacity (table vertical): approx. 100 kg - Dimensions mounting plates horizontal/vertical: 375 x 500 / 375 x 255 mm - Dimensions rotary table WxHxD (table horizontal): approx. 570 x 280 x 500 mm - Net weight: approx. 200 kg

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 6,666.00 for two gluing units: EUR 9,999.00 Delivery time: approx. 4 weeks

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataRapid traverse longitudinal/transverse/vertical60/60/60 m/minFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerType of magazineChain ApplicationUniversal Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 1000 x 800 mmTool magazine,chain, 60 pockets ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmSpindle taper HSK-A 63Clamping System HSK-A 63Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool magazine 60 ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmVertical420 mmCross450 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformat ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWSpeed range 20 - 15000 rpmTorque (40% DC) 121 NmTorque (100% DC) 84 NmDrive power (40% DC) 20,3 kWSpindle taper HSK-A 63Clamping System HSK-A 63Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working p ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWSpindle taper SK40Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationChip removal package with cabin roofSwarf removal package chip conveyor Coolant - ...

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm

description: The rejection table can be used after any kind of bottle control (filling height control, empty bottle inspector). The defect bottles will be rejected with a pusher. The station was connected to a Heuft filling height control. Puscher or Inspector are not included in this position. availability: in stock width: ca. 1000 mm length: ca. 3800 mm Installation dimension: ca. 3800 mm x 1600 mm transport size: ca. 3800 x 1600 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy ma ...

Offer 17230 Specifications: - Load capacity 3600 kg - Face plate diameter approx. 1050 x 1050 mm - Face Plate mot. swivel + swivel - Face plate speed electr. infinitely variable 0.2 - 1 rpm -Mot. Right - + Left - Run - Handheld remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Handheld remote control

Offer 24037 Specifications: - Max. load capacity 150 kg - Face plate diameter 800 - min. table height in horizontal position approx. 600 mm - Max. table height in horizontal position approx. 1100 mm - Face plate hydraulically infinitely variable swivel or tilt - Right + counterclockwise rotation of the face plate - Rotary movement electr. hydt. adjustable - Welding current transmission approx. 500 A - Drive 400 V - Connected load approx. 0.75 kW - Space requirement approx. W 1700 x H 1450 x D 1000 mm - Weight approx. 900 kg

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Manufacturer: Laweco, Type: Hydraulikhubtisch, Year: 1988, Lifting power kg: 7000, Length mm: 3800, Width mm: 2000, Total hight mm: 470, built-on roller conveyor: no, Year :1988

Sliding table saw ALTENDORF WA 6 - Exhibition machine - manual height adjustment, double trolley, scoring unit, swivelling, boom table, angle mitre stop, automatic brake, lowerable below table height ---------- Technical data ---------- swivel range: 0 - 45 Â, cutting length: 2,500 mm, cutting width at the parallel fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ã: 315 mm, Swivel range mitre stop: up to 49 Â, speeds: 4,200 rpm, motor power main motor: 5,

Sliding table saw ALTENDORF F 25, type 1 exhibition machine double trolley swivel man. Height and swivel adjustment Rip fence with man. Fine adjustment angle mitre stop Extraction hood large scoring Basic with LED lighting ---------- Technical data ---------- Swivel range: 0 - 46 Â carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ã: 315 mm Cut-to-length fence extendable to: 3,450 mm Speeds: 3,600 / 4,200 rpm Engine power: 5.5 kW (7.5 hp) Ar

Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T

Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Axial Dry Cooler, Güntner GFH090.2A/3-M(D) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 650kW Air temperature: 35º C. Fans: 3 pieces, 2.8kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6100x1150x1460mm Weight: 1550kg Sound pressure level: 57 dB(A) 10m distance, Year of manufacture: 2018 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Table milling machine MARTIN - used-finely adjustable milling fence, clockwise/counterclockwise rotation ---------- Technical data ---------- table size: 1,000x930 mm, work table height: 860 mm, spindle diameter: 40 mm, useful length milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, speeds: 3,000/4,500/6,000/9,000 rpm, motor: 4.7/5.7 kW, extraction nozzle Ã: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Manual turning head Hydraulic clamping Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2200 x 800 mm Power on spindle: 18,5 kWt Admission in millinghead (ISO): ISO 50 Max speedrange: 1500 rpm Control: Heidenhain Weight: 14000 kg

Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995