cold used for sale

ZM APT Machelen Number of rolls: 3 rolls Roll capacity cold: 2100 x 10 mm

ZM 2050 x 6 mm Number of rolls: 3 rolls Roll capacity cold: 2050 x 6 mm

MaFm 1100 x 3 mm Number of rolls: 3 Roll capacity cold: 1100 x 3 mm

The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany

USED BACHILLER STAINLESS STEEL BEATERS MILL REF.: C4750 Beater mill with a mobile disk with hard wear resistant steel plates. It can be used by two edges, against a static track. It is considered a cold mill because of the high air flow it generates.

BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

ORT RP30 MS 2-roll 30 tons electronic overhaul and electronic retrofit with Siemens PLC The machine is visible working in our warehouse in Gussago BS. Possibility of proof Mimu Machine Tools Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (hence the fatigue behavior, Power (Ton): 30, Number of rollers: 2, PLC: Yes

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

Heat pump / chiller, air-cooled, reversible Type: CYGNUS TECH HCY 051 MTA S.P.A. CYGNUS TECH HCY 051 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crankpan heating, (no pump, no tank). Cooling capacity kW 14,1 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 2.41 Ambient temperature 32 °C Heating capacity kW 15,4 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 2.66 Ambient temperature 7 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5,6 Max. current (A) 11.4 Starting current circuit (A) 71 Protection Class: IPX4 Dimensions: Depth mm 550, width mm 1420, height mm 1288 Weight kg 197 Connection Rp 1" Serial No.: 2200371602 Year of construction: 2021 Condition: Optical 2, Technically ok us ...

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior [https://it.wikipedia.org/wiki/Fatica_(scienza_dei_materiali)]) or the creation of a thread [https://it.wikipedia.org/wiki/Filetting z more resistant than the one obtained by turning [https://it.wikipedia.org/wiki/Tornitura], thanks to a greater hardening [https://it.wikipedia.org/wiki/Incrudimento] of the material., Power (Ton): 18, Number of rollers: 2, PLC: Siemens

ZREMB GH4 tube bending machine, manufactured in 1983, is used in factories during the precise processing of all varieties of installation tubes. The tube bending is performed in a semi-automatic mode on a cam with the mandrel filling the most deformed section of the tube. The machine comes with a comprehensive range of equipment shown in the accompanying photos. The GH4 mandrel bending machine weighs 2450 kg. The ZREMB tube bending machine consists of: – drive mechanism – mandrel feed mechanism – guiding mechanism – control panel mechanism – hydraulic system – electrical installation assembly – frame assembly Technical specification of the ZREMB GH4 bending machine - tube diameters: 1 ½”; 2″, 2 ½”; 3″, 3 ½”; 4″ - maximum bending angle: 180° - bending capacity (30 bends): 180°/h - head working movement time (180°): 38 s - head return movem ...

no foundation required Number of rolls: 3 rolls Roll capacity cold: 3100 x 15 mm Roll dia upside: 300 mm Weight: 16 ton

LIQUIDATION of indirect fire electric kettle for capacity of 100 liters. Manufactured by METOS, mod. VIKING BASIC 100E. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Electrical power: three-phase, 400V, 3P N, 50Hz, 25 A, 16 KW, . Equipped with inlet tap for hot and cold water. External measurements: 1200 mm wide x 800 mm deep x 1210 mm high). 304L outdoor stainless steel construction, frame and cooking vessel in stainless steel, cylindrical in shape with rounded bottom. Electronic thermostat. Its condition is excellent re-release. Equipment reviewed and guaranteed. OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you need any information, more photos, or videos and do any type of test in our exhibition pavilion you have at your disposal by calling the commercial attention phone. If you are really interested in the te ...

Code: 0578 Brand: SORMEC 2000 - ITALY Model: 10000 - Norme CE Automatic cold press for panels, polyurethane foam, industrial shed doors, perimeter walls, foamed panels, insulation panels, laminates and various - CE standard Technical data: Working dimensions mm 10000 x 1500 Workpiece passage mm 2000 Opening mm 1000 Height of roller table mm 500 Motorised roller conveyor for workpiece feed with possibility of forward/backward movement N° 18 pistons diameter mm 70 N° 2 hydraulic power unit Pistons opening/closing choiceor Pressing timer Safety protection nets Power Kw 10,3 Compressed air 7 bar Overall dimensions: mm 10500 x 2300 x 3300 h Weight kg 19000

Ice cream sales counter Proget G. Giola Pann 12 E -Ice cream counter of Ital Proget Cold Refrigeration S.A.S. -Model: Vetrina G. Gioia Pann 12 E -230 volts -1.41 kW -Year of construction 06 / 2015 -Outer dimensions: Width: 112cm Depth: 96cm Height: 125cm

-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical

NILPETER MO 3300 SERVO NUMBER M-1103 Format 335mm x max. 25" Length Type: Multifunction Offset Year 2004 Basic Machine Structure: 8 Colours, thereof 6x Offset (DW2-DW7) 1 Punching Unit, Register Control 1) Unwinding: with Roll Lifter & edge Control 2) Move-in Station: with Corona System Vetaphone 2kW & Teknec Web cleaning 3) M-Station: (First Platform) Delam-Relam & Turning Cross 4-7) MO Stations: GMI Mircocolor 1 Colour control System & Siphon control & Ink Agitator 8) M-Station 9) Punching Unit: with Pull Station & 1 Punching Unit 15"-25" L+B Gapmaster 10) Rewind Unit: with Grid Rewinder & Label Converter & BST Camera 11) Gew UV System: VCP with cooling Drums DW 1+2 reinforced Lamp System for Screen printing 12) Cooling Unicold TAE 081 13) Baldwin Water Treatment (NEW 2019) 14) Main Control Panel 15) GMI Control Panel Offset inserts: 4 x 6 pieces – 20", 22", 2 ...

Hydraulic bending roll Variable speed Conical bending Two digital readouts Number of rolls: 4 rolls Roll capacity cold: 3100 x 14 mm Roll dia upside: 280 mm Dia under roll - side rolls: 280 - 220 mm Power needed: 10 hp Length: 6450 mm Depth: 1700 mm Hight: 1600 mm Weight: 11,5 ton

Schafer SRMVHY 3100 x 20 mm Number of rolls: 3 rolls Roll capacity cold: 20 mm Length: 6500 mm Depth: 5000 mm Hight: 4800 mm

NILPETER MO4 - 6 colours offset label press + 4 flexo NILPETER MO4 6 COLOURS OFFSET AND 2 COL. FLEXO PRINTING UNITS LABEL PRESS WITH SLEEVE SYSTEM  Age: 2014  Unwind  Rewind  Corona treatment  2 Flexo printing units  6 offset printing units  Sleeve system for offset units  2 Flexo printing units  Cold foil application  Lamination  Web cleaning  GEW UV curin  Delam Relam unit Kocher & Beck Automatic unwinder and roll changer (Butt splicer) Kocher & Beck Automatic rewinder and roll changer (Butt splicer)  Kocher & Beck Automatic Waste Rewinder with turret  Chilled rollers for printing on film  Rotary Die Cutter with Kocher & Beck GapMaster  Slitting unit  Backside printing  Perforation cross: YES in the die cutter  Perforation lengthwise: YES in the die cutter  Screen printing 1C, then 6c offset  ...

ZM 1500 x 11 mm CNC Number of rolls: 3 rolls Roll capacity cold: 11 mm Length: 4200 mm Depth: 1200 mm Hight: 1500 mm

Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!

Manufacturer: Bielomatik Model: 368 year: 1994 8 stations Paper size (cm): 100 to 400 Multiflex, Crimping Snap-out delivery 2 5/6" to 121/2 Indentation cylinder 24" x 100mm Cold glue with 7 nozzles intermittently programmable 2 Numbering possible on a form Price: on request

BARMAG EXTRUSION SPINNING MACHINE WITH 12 POSITION / 72 THREADLINES • FOR PET POY MICROFILAMENT • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

SPECIFICATIONS: Hydraulic carpentry board pressing system for the production of coffins (oak, poplar, fir and other types of wood) Dimensions of the press mm: 2100 x 1600 with 9 pistons Stroke mm: 150 Complete with: - Automatic loading - 4 pressing units - Automatic unloading - 1 saw for the cross-section max. stroke mm 2800 - 1 manually adjustable device for forming floors and coffin covers - Electrical control box Electric hot and cold operation

Thread rolling machine ORT RP50U 2-roll 50 tons swiveling heads, Electronic/electrical retrofit with PLC to control position, power, roller speed, etc., New hydraulic pump The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools, Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (hence the fatigue behavior of the material., Power (Ton): 50, Number of rollers: 2

ega Plus - LF 330 Internal machine number: Vega Internal C3 number: Variant 10 Printing process: UV flexographic printing Printing units: 1 Own Coating Unit: No Printing ink: UV - flexographic printing ink Drying: UV - drying Painting-partial: No Painting-full: Yes / Flexosleeve Varnishes: Gloss varnish, matt varnish, TTF varnish, luminescent varnish Laminating: No Material width paper and foil: min.: 150 mm / max.: 340 Print width: max. 310 Printing performance: only punching max. 200 m/min., printing max. 70 m/min. max. rolls Ø - down: 1000 mm / max. rolls Ø - up: 400 mm punching width: max. 320 mm Print feed: min. 80T = 254 mm Print feed: max. 136T = 431.8 Format punching: Rotary WGR 240 punching units: 2 Flat punching: No Punching sheet: Yes Punching cylinder: No Airshock cylinder: No Upper punch: Yes Lower punch: Yes Sheet cutting (crosswise) / leaf cutter: No ...

This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.

x-travel: 290/300 mm y-travel: 160 mm z-travel: 330/340 mm engine output: 1,5/1,9 kW weight of the machine ca.: 0,7 t Optical condition: very good: Mechanic: very good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 Aktiv vertical milling head Sk 40: Sk 40 S 20x2 operating instruction: operating key: ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green Compliance with the Machinery Directive on request at extra cost (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acce ...

Machine: Gallus R250 Internal Machines No.: 567 Internal C3 No.: Variant 5 Printing Process: Letterpress Printing Units: 5c+Varnish Own Coating Unit: YES Printing Ink: UV Printing Inks Drying: UV Drying Painting-partial: YES / Flexo-Cliché Painting-full-f.: YES / Flexo-Cliché Varnishes: Gloss Varnish, Matt Varnish, TTF Varnish, Luminescent Varnish Lamination: NO Paper material width: min. 130mm / max. 270mm Print width: max.: 255mm Printing capacity: max. rolls Ø - From: 700mm / max. rolls Ø - On: 700mm Punching width: max. 255mm Pressure feed: min. 304.8mm (96T) Pressure feed: max. 596.9mm (188T) Format punching: Flat & rotary WGR 220 Punching units: 1x flat / 1x rotary Flat Stamping: YES Punching Plate: YES Punching Cylinder: YES Airshock Cylinder: YES Upper punching: YES Bottom punching: YES with pass. Umfg. to the Upper Punches Sheet Cutting (Cross) / Sheet C ...

Circular saw blade sharpening machine make WERKÖ type SWSK 1250Built in 1977for sharpening medium to coarser metal saw bladesTechnical specifications:Saw blade diameter Cold circular saws: 250 - 1250 mmHot circular saws: 900 - 1700 mmTooth pitch up to: 42 mmAbrasive double height: 25, 37, 50, 75 and 100xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0x a0xa0: per minute, where 25 andxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0x a0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0: 37 mainly forxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0x a0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0: serve the machine servesGrinding wheel revolutions: 2000 and 2500 rpm.Grinding wheel diameter: 250 mmCutter tooth can be tilted on both sides: up to 45 degreeCutting edge geometry for hot circular saws: = -4 degreexa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa ...

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished "scotch brite" type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressu ...

Cold water high-pressure cleaner and hydraulic oil demand unit. Working pressure: Infinitely variable up to 320 bar. Required quantity: up to 21l /min (1,260 l/h) Pump: 3-plunger, all-ceramic Engine: 2 cylinders 4 stroke petrol engine Motor power: 16.4 kW Speed motor/pump: 3,250/1,450 rpm Pump drive: Gearbox Fuel consumption:approx. 5.5l/h Volume fuel tank: 20l Pressure outlet (water) M221,5 AG Heating capacity Olbrenner Empty Weight: 110kg Dimensions(LWH) 757999cm Article no.: 1 486 089

Cold circular saw, metal circular saw, metal chop saw -Max. Saw blade: Ø 315 mm -with coolant device: -Saw blade speed: 33/66 rpm -Cutting area: 90° flat 135 x 80 mm -Cutting area: 45° flat 100 x 80 mm -swivel: -Dimensions: 450/800/H1700 mm -Weight: 278 kg

Process chiller / chiller air-cooled, Type: TAEevo Tech 351P3-20 MTA S.p.A. TAEevo Tech 351P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, electronic expansion valves, phase monitoring, buffer tank 350 ltr., built-in P3 circulation pump and speed-controlled fans. Cooling capacity kW 66.9 Cold water temp. Exit/Entry (°C): 7 / 12 Medium: Water Volume flow (m³/h) 11.4 Available pump pressure (bar) 3.02 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 37.48 Max. current (A) 64,44 Starting current circuit (A) 208.53 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1065 Connection Rp 2" Serial No.: 2200372599 Year of construction 2021 ...

Cold water high-pressure cleaner Working pressure: infinitely variable up to 350 bar Required quantity:up to 21l/min (1.260l/h) Pump:3-Plunger All-Ceramic Engine:2 Cyilinder, Hatz Diesel,air-throated Motor power:17 kW Speed motor/pump: 2,900/1,450 rpm Pump drive: V-belt Fuel consumption:approx. 4,0l/h Volume fuel tank:20l Pressure outlet (water):M221.5AG Heating capacity Olbrenner Empty Weight:215kg Mass(LWH) 918096 Article no.: 1 492 060 or 1 492 002

Hot and cold water high-pressure cleaners Working pressure:infinitely variable up to 350 bar max requirement quantity:16l/min Pump:3 Plunger,All-ceramic Engine:Kubota 3-cylinder diesel Motor power:13kW Speed motor & pump: 3000/1,090 rpm Pump drive:V-belts Fuel consumption:3,9l/h Volume of carbon tank:70l Volume water tank:300l Pressure outlet (water) M22 1.5IG Heating capacity olburner: max1115kW (approx. 95°C) Consumption Olbrenner: approx. 7l/h Construction:self-supporting frame on frame with forklift pockets Empty weight:about 680kg Mass(LWH) 152122146 Dimensions open (LWH) 183122195 Article no.: 1 480 030

Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 220 bar max demand quantity 26l/min Pump:3-Plunger,All-Ceramic Engine: Kubota 3-cyilinder diesel Motor power: 13kW Speed motor and pump: 3,000/1,760 rpm Pump drive: V-belt Fuel consumption: 3,9l/h Volume fuel tank: 70l Pressure outlet: (water): M22 1.5 AG Heating capacity Olbrenner : max 1115kW (ca 95° C) Consumption Olbrenner: approx. 7l/h Construction: Skid - Construction Empty weight: about 420kg Dimensions(LWH) 12080112cm Article no.: 1 546 712

SWAN RAKOBAK 1500 Smoke System, Smoker, Smoke Chamber Smoke Chamber Smoking system / smoker SWAN RAKOBAK 1500 TYPE: RAKOBAK 1500-E-100 /P3000 Specifications: 400 V / 50Hz / 50 A Nominal capacity: 1500 liters Year of construction: 2008 Heating: Electric Nine-heat load 28 kW Functions: Redness, Drying, Cold Smoke, Hot Smoke, Smoking, Cooking, Baking, Air Conditioning, Shower, Cleaning, Rinsing 3-speed circulating fan Separate smoke generator for friction smoke Height: 90 cm Dimensions smoke chamber: HxWxD = 245 x 126 x 125 cm (width plus control 25 cm) Dimensions smoke generator: HxWxD = 125 x 60 x 115 cm Dimensions smoking trolley: HxWxD = 148.5 x 98 x 80 cm Door hinge on the right original wiring diagram is included The system is in stock ready for shipment. Good condition. The system was in operation until recently and needs to be reconnected by a professional ...

Climate cabinet Fabr. TENNEYFabr -No: 577066J197Internal dimensions: 350 x 250 x 200 mmMax. Adjustability cold: - 88 ° CMax. Adjustability heat: + 176 ° CExternal dimensions L x W x H: 950 x 610 x 1700 mmWith- mobile undercarriage- stepless temperature adjustment- Timer- autom. cycle settingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

MARK ANDY P3 – 330mm / 7 x FLEXO + 1 x UV DRYER Machine information: Performance Series A Platform With Endless Opportunity Designed to drive profitability in a highly competitive industry, the award-winning Performance Series product line redefines workflow productivity through its simple design, efficient waste savings and fast changeovers. Specifications:  Brand / type: MARK ANDY / P3-13-7 Hot Air + 1 x UV Dryer  Age : 2014  Webwidth : 330mm  7 x Flexo Units (Hot Air)  7 x Hot Air dryer  1 x UV Dryer  Machine has a multilayer module for the production of multilayer labels and a laminator.  Unwinder  Rewinder  Lamination/Cold foil  2x Punching Units plus Sheeting Station  good condition - has always been maintained by Mark Andy  P3 Imperial Metric  Web Width 10/13/17 inch 250/330/430 mm  Max Speed 750 fpm 230m/min  ...

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

1x Jungheinrich reach truck, condition: fully functional, the truck was checked and serviced annually and repaired if necessary - from a food wholesale warehouse fleet with its own maintenance workshop. Incl. charger! Price gross incl. VAT! Shipping possible for an extra charge. - Manufacturer: Jungheinrich - Type: ETV 214 - Reach truck - Drive type: Electric - Load capacity: 1400kg - Lifting height: 5300 mm - Load centre of gravity: 600 mm - Fork length: 1150 mm - Height: 2300mm - Year of construction: 2014 - Hours: 13225 - Battery from 01/2020 - with full free lift, load protection grille & side shifter. Also available as a cold store version! Several identical devices with a lifting height of 5.3m are also available. Miscellaneous Years of construction and operating hours available - just inquire!

Press mould Console 2 Cold channel form Output: 1 product Dimensions: 260x420x270mm (390x490x270mm with a pusher, mount and legs) Weight: about 200 kg Condition: perfect

Production - Italy, release of 2013. It is in working condition. Nominal power - 22 kW phase - 3 a.c. 50Hz Weight - 990 kg Gives out cold - 70-80 kW.

I offer a mercury analyzer for sample analysis: - liquid (tin chloride reduction method), - solids (thermal method). Detection method: non-dispersive, double-beam atomic absorption system with generation of cold mercury vapor. Detection limit: 0.002ng Measuring range: 0 - 1000ng.

Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide

Automatic tube filling and sealing machine for PE and laminate tubes including: - Format set D.19 and D.35 - Tube magazine for empty tubes - automatic tube orientation - Hot air sealing unit Leister - Coding device on the tube fold on one side - water-cooled sealing jaws - cooling of the weld seam with cold air gun - Siemens PLC - 50L product hopper

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS