We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,305 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Cold water high-pressure cleaner with 2.2 kW output - 150 bar pressure and 8 l/min. Including hotbox up to 200 bar. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - ...
new
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
new
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
new
Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
new
Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
new
Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...
new
Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...
used
Absorption refrigeration machine eCoo 2.0 ,10IPS, heat cooling, 16KW cooling capacity 20-14°C cold water, 24KW hot water 95-75°C, 40KW recooling capacity 35-28°C,
Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers
used
Compressor Copeland Type: ZP385KCE-TWD524 Volume: 61 m3/h Cooling capacity: 66 kW at -5°C/40°C, 54 kW at -10°C/40°C, 35 kW at -20°C/40°C R404A Quantities in stock: 2 Reference number: S54 Condition: Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
new
Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...
used
Compressor Copeland Type: ZP295KCE-TWD-524 Volume: 46.7 m3/h Cooling capacity: 51 kW at -5°C/40°C, 42 kW at -10°C/40°C, 27.5 kW at -20°C/40°C R404A Quantities in stock: 2 Reference number: S55 Condition: Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
new
Hiwell batter mixer II, Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter., Advantages, 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation., 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium., 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder., 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operat ...
used
3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...
used
Evaporator KUBA Type: SGBE 141 Cowl power: 29.2 kW at DT8 Lamel distance: 7 mm With electric heating Number of fans: 1 x 710 mm Dimensions: 1600 x 1300 x 1400 mm Cold agent: Freon Volume: 44 ltr Number of pieces in stock: 5 Reference number: CH149 Condition: Used in good condition Price on request, We have many other refrigeration systems : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
used
Cold regenerating adsorption dryer make SPX HANKISON type HHL 200Ser. -No: 347434-1204-2200 Year 2004minute / Max. Ambient temperature: +2 / + 45 °minute / Max. Inlet temperature: +2 / + 50 °Flow rate (based on + 20 ° compressed airsuction temperature and 1 bar absolute): 200 m³ / h.Pressure dew point at operating overpressure: -40 °minute / Max. Operating pressure: 5.0 / 16 barCompressed air connection: R 1Setting value Pressure switch Tank Pressure min.:0,91 bar ON: 0.7 bar OFFAdsorbent: activated aluminaContainer capacity: 93 lFilling weight per pressure vessel: 70 kgDimensions approx. W x D x H: 1150 x 750 x 1980 mmWeight approx: 310 kgWith- Level 1 controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our ...
used
Chiller LENNOX Type: NAC 270D NM1M Cooling capacity: 272.8 kW 2 x compressors Copeland: ZP295KCE-TWD-524 and 2 x compressors Copeland ZP 385KCE-TWD-524 R410A Built: 2008 Dimensions: 3600 mm x 2300 mm x 2000 mm Number of pieces in stock: 1 Condition: Used Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
used
Verbundanlagen Bitzer with original capacitors Deep-cave / Normal kuhlung -3x compressor Bitzer HSK6461-60-40P -KaeltePower: 177 kW at -10oC/40oC R134a 292.8 kW at -10oC/40oC R407C -Volume: 3 x 165 m3/h -Pieces in stock: 2 pieces -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
new
GAS incineration furnace powder furnace Chamber furnace SOFORT LIEFERBAR Gas oven with circulating air SGS-320O Price 47,444.00 EUR net • Working dimensions ca.in mm 1800 width x 2500 height x 6500 depth • External dimensions ca.in mm 2320 width x 3410 height x 7300 depth • Operation NG • Heating capacity 320 kW • Heating time of the empty and cold oven approx. 15-40 minutes from room temperature 20 °C to 180 °C • Max temperature 230°C • Circulating air • Fans 1.1 kW x4 3P 380-400V • Insulation thickness from 240 mm to 300 mm • Transport in the oven 5 rails
used
Ice cream counter Cold center R 4040 A Connection 230 V, 1.1 kW Used equipment not tested Dimensions approx. 1200 x 700 x 1250 mm, WxDxH
used
Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.
used
Piston dosing filler for cold and hot products (e.g. syrup, jam, chutney,...) Filling volume 50-1000ml
used
9-colour combination offset/label press 5 x offset cassettes in 25 x , 23 , 22.25 , 2 x Offset Cassettes 24 x . 2 x Flexo 2 x screen printing 1 x cold foil embossing Sensotec autom. Register control,only for longitudinal register control Amal Non - Stop reel changer, unwinding and winding Corona Pre-treatment - Vetaphone Track edge control BST Wandres railway cleaning Lamination Painting Low Migration Punch Gapmaster Kocher Beck back pressure Baldwin Cooling 9x UV Dryer GEW Cooling plates Turning cross to plant 3
used
Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear
used
Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1966 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct
used
Perfect binder - cold glue Gantenbein Model Bufalo BAFC-33 Year 1970 Working width 330 mm Speed up to 240 cycles per hour Grinding roller sand paper roll and grinder knife roll Details automatic movement of the wagon Available Direct
new
saw blade diameter: 500 x 50 mm cutting diameter: 170 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 170 mm capacity 45 degrees: round: 140 mm capacity 90 degrees: square: 150 mm capacity 45 degrees: square: 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 500 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°
used
Description automatic carton setter Keck SK 5 Ft with new Baumer hhs adhesive application system. consisting of Xtend C-421 4 channel control, 4 pieces DLK 404 valves, 15 liters cold glue pressure vessel Year of construction 2004 Operating hours approx. 3800 cardboard formats in the appendix – currently set up for the tomato box. Cleaned, repaired and adjusted. Ce declaration, machine manual, electronic drawing In the video there are no safety doors – but the machine has new safety doors included Power Minimum 2300 / hour Maximum 10000 / hour Optimim 3-5000 / hour FORMAT RANGE tomatoes-paper-tray
new
Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 500 bar Maximum requirement quantity: 14-30l /min Pump:3-Plunger,All-Ceramic Engine: Hatz,3-cylinder diesel (water-throated) Motor power:42kW Speed motor/pump: 2,350 /1,450 rpm Pump drive:V-belts Fuel consumption:approx. 5.3 l/h Volume fuel tanks:70l/105 l Volume water tank: 1000 l Pressure outlet:(water): M241.5 IG Heating capacity olburner: 291 kW (ca 95 °C) Consumption olburner: approx. 9.1 l/h Construction: self-supporting frame on frame with forklift pockets Empty weight: approx. 1,450 kg Mass: (LWH) 220+147177 Ground open (LWH) 307147246 Article no.: 1 491 030
used
Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4U-15Y-40P -Kaeltepower: 70 kW at -10ºC/40ºC -Volume: 3 x 73.7 m3/h -Quantity in stock: 1 piece -Kealtemittel: R404A -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
Cold water high-pressure cleaner Working pressure: 800 to 2,800 bar Required quantity: 8 to 27l/min Pump: Slow-running high-pressure pump with 3 carbide plungers, integrated reduction gear, compression lubrication and engine clamp Engine: VOLVO PENTA 4 CYLINDER Diesel,water-throated,5.200cm3 Engine power:160 kW,220 hp Motor/pump speed: 2,065rpm / 500 rpm Pump drive: Gearbox Fuel consumption:approx. 21 l/h Volume fuel tanks200l Volume water tank: 160l Volume urea tank: 25l Consumption urea: approx. 1.05 l/h Pressure outlet:(water): 9/16'' -18UNF LH IG or DYNAJET Easy Connect EC Chassis: 2-axle attachment Empty weight: 2.690kg Mass: (LWH)467197218 Ground open (LWH)487197254 Article no.: 1 610 040
used
Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4NES-14Y-40P -KaelteLeistung: 94.5 kW at -10ºC/40ºC, 47 kW at -25ºC/40ºC, 19kW at -40ºC/40ºC -Volume: 3 x 56.3 m3/h -Quantity in stock: 1 piece -Kealtemittel: R404A -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
used
SIDEL SBO 16 / 20 Universal Eco2 Predis Ul.Cl. PET blowing machine for 16 hot or cold moulds. The manufacturing year is 2011 and the capacity is of 25.600 BPH (1.600 bpm/h). The moulds are hot up to 75°C (or standard) and the machine is equipped with quick change for moulds. The oven type is Sidel Universal Eco2 C3 special filters. The number of heating modules are 20. Personalization for preform neck 38mm 3 starts. Machine equipped with: - Sidel preforms tipper, hopper & feeder - Sidel AGR preforms disinfection - Sidel Predis Ultra Clean - Vulcanic water/oil thermoregulator - Sidel PCC drive & electrical cabinet Regular maintenance and service by SIDEL. The machine is still installed and has to be dismantled. If you are interested, you can contact us for further information and to discuss about the availability.
used
Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
used
WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from: -a- The destacking position on the buffer (this is also the ...
used
Smoking system / smoker SWAN RAKOBAK 1500 TYPE: RAKOBAK 1500-E-100 /P3000 Specifications: 400 V / 50Hz / 50 A Nominal capacity: 1500 liters Year of construction: 2010 Heating: Electric Nominal heat load 28 kW Functions: reddening, drying, cold smoke, hot smoke, smoking, cooking, baking, air conditioning, shower, cleaning, rinsing 3-speed recirculating fan separate smoke generator for smoke including 8 pieces of new rubbing timber including 3 stainless steel smoke trolleys including approx. 100 stainless steel smoke sticks Height: 90 cm Dimensions smokebox: HxWxD = 245 x 126 x 125 cm (width plus control 25 cm) Dimensions smoke generator: HxWxD = 125 x 60 x 115 cm Dimensions smoke trolley: HxWxD = 148.5 x 98 x 80 cm Door hinge right original wiring diagram included The system is pre-cleaned and ready for dispatch in stock. C ...
used
KEN 2311-HOS laboratory dishwasher KEN 2311-HOS is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and two-door (through) models. Continuous machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 t ...
used
KEN 2311 Laboratory dishwasher KEN 2311 is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, 3/4" RG, 5-30°C, 0-30°dH Water connection Hot so ...
used
PRASMATIC MSW 300 C packaging machine was built in Italy in 2012. The packaging machine is used for the automatic shrink-wrapping of products such as bottles or cans in packs of 6-9 pieces. High production efficiency is ensured by the use of state-of-the-art technology to optimise the packaging cycle, such as the cold film cutting system via a rotating blade and the unwinding and winding speed control function via brushless motors to correctly feed the film. The shrink wrapping machine has very low mileage – it was used for only two months of the year. Technical specifications of the PRASMATIC MSW 300C packaging machine - packaging speed: 35 packs/min - average size changeover time: 10 – 25 min - maximum reel diameter: 500 mm - maximum reel width: 680 mm - maximum reel weight: 80 kg - brushless motors - control panel with touch screen - rated current: 65 A - power supp ...
used
feed pressure: 10 bar Effective free air delivery: 1.000 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 463 kg. total power requirement: 7,5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer working automatically with pre- and post-filter (mounted) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Brand New UBE Squeeze Casting Machine Still in crates never installed. Specifications: Make: UBE Model: VSC 700 YOM: 2016 700 metric ton Vertical Cold chamber/High-pressure Squeeze Cast machine Fully Loaded Daylight 1.350 mm Die Closing force 7.000 KN ( 17.5 MPA) Column Internal Dimensions ( Vertical x Horizontal) 940 x 770 mm Column Diameter 180 mm Die Stroke 750 mm Die opening Force 352 KN ( 17.5 MPA) Injection Force ( Max-Min) 999 to 480 KN Injection Stroke ( Including Docking Stroke) 872 mm Sleeve Docking Stroke 170 mm Plunger Tip Diameter ( outer tip) 135 mm Plunger Tip Diameter ( Inner Tip) 60 mm Injection Position Machine Center Injection Speed Max. 110 mm/ sec Ejection Force 196 KN (17.5 MPA) Ejection Stroke 40 mm Distance from Die Mounting surface to Ejection Plate 190 mm Number of Valves 1 moveable and 2 fixed Motor for Hydraulic pump 480V ...
used
Cold Radial Forging Machine GFM SX-10 YOM: 1971/2019 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx. 9100 mm Width (with electrical cabinets and control panel) approx. 4500 mm Height forging machine approx. 2150 mm Forging height above floor 1250 mm Weight (forging machine) ...
used
Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker (A3773) Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following m ...
used
Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer HSK 7471-90 -KaeltePower: 435 kW at -10ºC/40ºC R404A 280 kW at -20ºC/40ºC R404A -Volume: 3 x 250 m3/h -Quantity in stock: 1 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
new
Heat pump / chiller air-cooled, switchable, reversible Type: HCYGNUS TECH HCY 171 PT1 MTA S.P.A. CYGNUS TECH HCY 171 PT1 are compact heat pump / water chillers suitable for outdoor installation up to -10°C suction temperature. Includes crank tub heating, buffer tank, built-in P1 circulation pump. Cooling capacity kW 36.5 Cold water temp. Outlet / Inlet: 7 / 12°C Volume flow m³/h 6.21 Available pump pressure bar 1.85 Ambient temperature °C 32 Heating capacity kW 43.2 Heating water temp. Outlet / Inlet: 45 / 40°C Volume flow m³/h 7.52 Available pump pressure bar 1.46 Ambient temperature °C 7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 power consumption (kW) 18,91 current (A) 33.67 Starting current circuit (A) 201.37 Protection class: IPX4 Dimensions: Depth mm 2104, width mm 1112, height mm 1477 Weight kg 620 C ...
used
feed pressure: 10 bar Effective free air delivery: 1.950 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 467 kg. total power requirement: 15,0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer working automatically with pre- and post-filter (mounted) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 10 bar Effective free air delivery: 1.450 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 452 kg. total power requirement: 11,0 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer working automatically with pre- and post-filter (mounted) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: 10 bar Effective free air delivery: 700 L/min motor: 400 V 0: 250 Liter weight of the machine ca.: 397 kg. total power requirement: 5,5 kW range L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series List price: 8.170 euros Made in Germany Furnishing: - with container and dryer / can be used immediately - SOLIDcontrol microprocessor control - Network pressure sensor - Belt-driven drive system - low compressed air temperature due to effective aftercooler - Compressed air tank installed horizontally - including cold compressed air dryer working automatically with pre- and post-filter (mounted) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.