cold roll mill used for sale

Control Heidenhain TNC 415 B Track Control X-axis (travel) 2000 mm Y-axis (travel) 1600 mm Z-axis (travel) 1000 mm Quill stroke: 360 mm Table size 2,000 x 1,000 mm Table load approx. 6,000 kg Spindle power approx. 22 kW Spindle speed 20 – 3,000 rpm Tool holder ISO 50 / SK50 Spindle diameter front 90 mm Quill diameter 150 mm Torque approx. 1,193 Nm Auction-ID: A7-46802-51

Stroke of the Pinole: 125 mm. Auction-ID: A1-41996-170

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

Regianna model MILLENIUM marking machine year 2009 Auction-ID: A1-46617-1

Machine type: Universal milling machine Model: X6336A UNUSED - approx working hours around 20 Table size: 1370 x 360 mm Table travel X/Y/Z: 1000 / 320 / 400 mm T-slots: 3 / 18 / 80 mm Max table load: 800 kg Spindle taper (vertical): ISO 40 Spindle taper (horizontal): ISO 50 Spindle quill travel: 127 mm Spindle speed (vertical): 66 – 4540 rpm Spindle speed (horizontal): 60 – 1800 rpm Main motor (vertical): 5 HP Main motor (horizontal): 4 kW Z-axis rapid motor: 1.1 kW Coolant pump motor: 90 W Distance spindle to table (vertical): 155 – 700 mm Distance spindle to table (horizontal): 0 – 400 mm Extension arm travel: 450 mm Extension arm rotation: 360° DRO: 3-axis (SINO) Control: Manual Included accessories: – NT40 milling chuck – Tool kit – Quartz working lamp – Gad tongs – Partial protection Power supp ...

able dimensions ( x-y/mm) 6500 x 1800 Stroke ( X/mm) 6210 Stroke ( Y/mm) 3440 Stroke ( Z/mm) 1103 Type of controll heidenhain Number of spindle per minute 35 - 6000 Tool magazine yes Number of inserts in the tool magazine 60

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45043-2290

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45043-2291

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45043-2289

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...

For particularly high PVC or aluminium profiles Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 200 mm Pneumatic workpiece clamps Manual feed weight: approx. 300 kg

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

A CNC crankshaft milling machine Heller without chuck is available. Milling speed: 300m/min, workpiece length: 800mm, max. workpiece diameter: 700mm, pin diameter range: 35mm-80mm, clamping diameter: 180mm, travel path W/U/X/Z: 625mm/180mm/180mm/660mm, rotation range X: 360°, control system: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible.

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

Table dimensions ( x-y/mm) 3000 x 6000 Stroke ( X/mm) 7000 Stroke ( Y/mm) 3200 Stroke ( Z/mm) 1500 Type of controll heidenhain tnc 640 Number of spindle per minute 18000 Chuck connection hsk a 63 Type of head universal automatic bi-rotary Advances 50.000 mm/min Tools connection iso 50 Height ( x/mm) 5380

Used oliv oil mill 1200 kg/hTechnical Specifications & Performance DataThis complete olive oil extraction line is a robust, second hand industrial solution designed for reliable throughput and consistent quality. Built in 2004, it combines proven mechanical components with continuous-flow processing to handle olive preparation, malaxation, separation, and clarification. The line configuration is well-suited for producers seeking dependable uptime and a straightforward path to downstream industrial packaging or integration with a used bottling line for edible oil.Build year: 2004Throughput: 10–12 quintals/hour (approx. 1,000–1,200 kg/hour, product-dependent)Malaxers: 3 units x 600 liters eachPrimary separator: Decanter M3 by PieralisiPolishing stage: Pieralisi separatorPre-treatment: Leaf remover, hopper with belt conveyor, hopper with screw conveyor for olive loadingCrushing: C ...

Technical details X-axis stroke: 700 mm Y-axis stroke: 500 mm Stroke Z-axis: 600 mm Spindle stroke: 80 mm Spindle speed: 20 - 6,300 rpm Feed: 1 - 4,000 mm/min X and Z fast feed: 12 m/min Y-fast feed: 10 m/min Auction-ID: A1-46872-28

Milling machine DECKEL FP5CC With rotary table. Technical data X-axis: 800 mm Y-axis: 700 mm Z-axis: 550 mm Quill stroke vertical: 80 mm Auction-ID: A1-46872-32

This lot is a combination lot consisting of lots 16 to 19 Auction-ID: A1-45771-20

Year of construction 2018; motor power 5.5 kW; supplied with a supply. Auction-ID: A1-45771-17

Hermle UWF 900 Year of manufacture according to the wiring diagram: 1992 Control: Heidenhain 407 Facilities Handwheel Network connection Speed: 4,000 rpm Technical data X-travel: 600 mm Y-travel: 400 mm Z-travel: 420 mm Tool holder: SK 40 Distance spindle / table: 127 - 567 mm Spindle diameter in front bearing: 55 mm Auction-ID: A1-46872-40

Type: Tool cabinet with assorted milling cutters and tool holders Manufacturer: Various manufacturers Remarks: Metal storage cabinet with multiple drawers, assorted milling cutters, end mills, boring tools, collets, adapters and tool holders included, contents as shown in pictures, used condition with signs of wear Scope of delivery: Complete cabinet with visible tooling and accessories Auction-ID: A7-45993-117

Type: Tool cabinet with assorted milling cutters and tool holders Manufacturer: Various manufacturers Remarks: Metal storage cabinet with multiple drawers, assorted milling cutters, end mills, boring tools, collets, adapters and tool holders included, contents as shown in pictures, used condition with signs of wear Scope of delivery: Complete cabinet with visible tooling and accessories Auction-ID: A7-45993-116

strong>Feed in longitudinal direction table (X-axis): 560 mm Feed in transverse direction head (Y-axis): 500 mm Head adjustment in height (Z-axis): 450 mm Table dimensions: 530 x 900 mm Max. weight on the table: 300 kg Spindle holder (ISO): SK 40 (M16) Power at the spindle: 2 - 4 kW Tool Changer: 20 Tools Speed range: 21 / 40 - 4,000 rpm Main motor power: 19 kVA Length: 4,400 mm Width: 4,300 mm Height: 2,150 mm Weight: 2,970 kg Auction-ID: A1-46872-31

Type: Tool cabinet with assorted milling cutters and tool holders Manufacturer: Various manufacturers Remarks: Metal storage cabinet with multiple drawers, assorted milling cutters, end mills, boring tools, collets, adapters and tool holders included, contents as shown in pictures, used condition with signs of wear Scope of delivery: Complete cabinet with visible tooling and accessories Auction-ID: A7-45993-119

Milling machine Mikron WF 21C Year of Make: 1996 Technical data X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6 Auction-ID: A1-46872-37

Type: Tool cabinet with assorted milling cutters and tool holders Manufacturer: Various manufacturers Remarks: Metal storage cabinet with multiple drawers, assorted milling cutters, end mills, boring tools, collets, adapters and tool holders included, contents as shown in pictures, used condition with signs of wear Scope of delivery: Complete cabinet with visible tooling and accessories Auction-ID: A7-45993-118

Milling machine MAHO MH 600 W Technical data Max. feed in longitudinal direction (X-axis): 600 mm Max. feed in transverse direction (Y-axis): 400 mm Max. feed in height (Z-axis): 400 mm Dimensions of the table clamping surface: 900 x 480 mm Power at the spindle: 5.5 kW Milling Head Spindle Holder (ISO): ISO 40 Speed range: 40 - 4,000 rpm Digital reading: Millplus CNC Weight: 2,900 kg Auction-ID: A1-46872-43

Milling machine Mikron WF 32 CH Technical data X-axis: 560 mm Y-axis: 500 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6 Speed range: 25 - 6,300 rpm Swivel range vertical milling head: +45° Auction-ID: A1-46872-38

SAEILO CONTUR TV 1000 Manufacturer: SAEILO (Germany) Model: CONTUR TV 1000 Year of Make: 1997 Control: HEIDENHAIN Technical data X/Y/Z axis movement: 1016/610/508mm Table size: 1080 x 580 mm Max. table load: 600 kg Tool change: 40-fold Spindle taper: SK 40 Cutting feed speed X / Y / Z: 0.25 to 5,080 mm/min Rapid traverse X / Y / Z: 20,000 mm/min Rapid traverse Z: 1,500 mm/min Spindle speed: 5 - 8,000 rpm Spindle power: 11 / 16.5 kW Machine weight: 6,000 kg Auction-ID: A1-46872-46

Milling machine DECKEL FP 4 AT Technical data Travel X / Y / Z: 560 / 500 / 390 mm Table size X / Y: 900 / 530 mm Spindle speed: up to 4,000 rpm Control: Contur-3 Recording: SK-40 Weight: approx. 3.4 t Auction-ID: A1-46872-29

Technical data X-travel: 300 mm Y-travel: 300 mm Z-travel: 400 mm Spindle holder: ISO 40 Spindle speeds: 40 - 4,000 rpm Table size: 620 x 390 mm Infinitely variable feeds: 4 - 4,000 mm/min Table load: 0.45 t Total power requirement: kW Machine weight: approx. 1.6 t Operating voltage: 380 V Auction-ID: A1-46872-30

Milling machine DECKEL FP 4 AT Technical data Travel X / Y / Z: 560 / 500 / 390 mm Table size X / Y: 900 / 530 mm Spindle speed: up to 4,000 rpm Control: Contur-3 Recording: SK-40 Weight: approx. 3.4 t Auction-ID: A1-46872-27

Machine type: Road milling machine / asphalt planer Manufacturer: Wirtgen Model: W500C Engine: KHD Deutz diesel engine Technical data: - Cold milling machine for asphalt and concrete surfaces - Compact design with 4-wheel chassis - Operator platform with steering wheel and controls - Discharge conveyor system (partially visible) Condition: - Used condition - Signs of wear, corrosion and paint damage Remarks: - CE marked - Suitable for road works and surface removal applications Auction-ID: A7-45990-22

2 industrial welders with wire feeder Auction-ID: A7-45993-191

DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)

Manual mill with Heidenhain DRO Table size: 1450 × 320 mm T-slots: 5 × 16 H-7 Distance between T-slots: 62 mm Table swivel: ±45° Longitudinal travel: 1130 mm Cross travel: 300 mm Vertical travel: 500 mm Distance spindle center to table: 500 mm Spindle taper: ISO-40 / ISO-50 Number of spindle speeds: 12 Spindle speed range: 35–1500 rpm Spindle axis to ram distance: 135 mm Universal head taper: ISO-50 Universal head speeds: 38–1440 rpm Manual ram travel: 650 mm Number of feeds: 12 Longitudinal and cross feed range: 10–510 mm/min Vertical feed range: 4–200 mm/min Rapid longitudinal/cross feed: 2500 mm/min Rapid vertical feed: 1000 mm/min Main motor power: 5.5 kW Feed motor power: 1.5 kW Coolant pump motor power: 0.09 kW Net weight: 2450 kg Gross shipping weight: 2650 kg Packing dimensions: 1820 × 1750 × 2100 mm Auction-ID: A7-46053-20

max. Drill cap. 45 mm; max. Milling cap. 32 mm; Discharge approx. 275 mm; transverse travel 230 mm; longitudinal travel 560 mm Auction-ID: A1-46386-7

PTO-driven rotary harrow / tiller, type RS1300C in used condition. Machine equipped with 3-point suspension and milling rotor with blades. Suitable for tillage, horticulture, agriculture and greenhouse work. Compact model suitable behind compact agricultural tractors and mini tractors. Auction-ID: A3-43534-11966

turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...

turning diameter:356 mm turning length:705 mm control: CELOS M730 UM MAPPS swing dia.:742 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 ( ±50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min Rapid travel B-axis (parts transfer subspindle):734 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:15/18,5/18,5 kW Spindle 1 Torque:409/505 /599 Nm Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:4500 1/min Spindle 2 power:7,5/11 kW turret stations / rotary tool stations:20 / 20 BMT40 speed of driven tools:10000 1/min :3.7/5,5/5,5 kW torque rotary tools:14 / 24 Nm total power requirement:38 kVA weight of the machine ca.:6,3 t dimensions of the machine ca.:4 (9) x 2,1 x 2,2 m Parts catcher:Sp. 1 und Sp. 2 Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) Tool presetter:Spindle 1 & 2 High precision Turning and Millin ...

turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...

turning diameter:65 mm turning length:120 mm control:Index C200-4D SL z-axis main spindle travel:390 mm z-axis subspindle travel:390 mm x-axis subspindle travel:600 mm Travel Y1:± 80 mm Travel y2:± 80 mm x-axis rapids:45 m/min y-axis rapids:15 m/min z-axis rapid travel:45 m/min Spindle 1 RPM:5000 1/min Spindle 1 Power:35,5/27,5 kW Spindle 1 Torque:170 /125 Nm Spindle 2 RPM:5000 1/min Spindle 2 power:35,5/27,5 kW Spindle 2 torque:170/125 Nm c-axis:0,00014 ° bar material dia.:65 mm spindle nose:AD 140 spindle bore:85 mm Milling spindle 1 RPM:18000 1/min Milling spindle 1 power:11 kW Milling Spindle1 torque:19 Nm Milling spindle 2 RPM:18000 1/min Milling Spindle 2 power:11 kW Milling spindle 2 torque:19 Nm B-axes swivel angle:230 ° B-axes torque:440 Nm B-axes angle resolution:0,001 ° Milling spindle 1 & 2 tool magazine:80 HSK A40 Milling spindle 2 tool magazine static tools :6 x VDI 25 ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:670 mm turning length:1540 mm control:F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover:700 mm Travel turret No.1 (milling spindle) x/y/z:495 / ± 150 / 1562(+164) mm Rotation B-axis:-30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/40 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:20,2/18,8 kW Torque of milling spindle:120 / 44 Nm tool taper milling spindle:Coromant Capto C6 Tool magazine for milling spindle (turret 1):76 Tool change time tool/tool, milling spindle:1,25 s Spindle 1 RPM:3000 1/min Spindle 1 Power:36 / 30 / 25 kW C-axis spindle 1:0,001 ° Bar capacity spindle 1:102 mm Spindle 2 RPM:4000 1/min Spindle 2 power:26 / 22 / 15 kW C-axis spindle 2:0,001 ° Bar capacity spindle 2:80 mm dimensions of the machine ca.:7,8 x 3,6 x 2,9 m Linear scales on axis:X, Y programmable steady:KLU-A530 & SLU-X3.2 Spindle 1 ...

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

turning diameter:356 mm turning length:705 mm control:MSX 850 MAPPS II swing dia.:755 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 (+-50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min rapid traverse Y-axis:10 m/min Rapid travel B-axis (parts transfer subspindle):30 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:18,5/18,5/15 kW Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:6000 1/min Spindle 2 power:11 / 7,5 kW turret stations / rotary tool stations:16 / 16 VDI 30 :5.5/5,5/3,7 kW speed of driven tools:6000 1/min total power requirement:39,2 kVA weight of the machine ca.:6,2 t dimensions of the machine ca.:3,1 x 2,0 x 2,2 m Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control.

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach