cold former used for sale

Metal Circular Sawing Machine Make EISELE Type VMS / 041Machine -No: S76383 Year 1976Saw blade diameter up to: 275 mmhere cutting area at 90 ° round: 90 mmxa0xa0xa0 Flat profile: 75 x 120 mmxa0xa0xa0 in miter at 45 ° round: 90 mmxa0xa0xa0 Profiles: 75 x 80 mm2 saw blade speeds due to pole-changing motor: 40/80 rpmDrive motor: 380 V, 1.4 / 1.9 kWDimensions: 600 x 600 x 1500 mmWeight approx: 170 kgWith- pneum. vice- mobile undercarriage- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm links capacity 45 degrees: round: 75 mm rechts 0: 30 / 60 U/min. dimensions of saw-blade: 350 x 32 mm weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High performance circular saw machine make EISELE type PSU 470-PV (pneumatic)Make no: 10306-48, year of construction 1986 (VA suitable)Saw blade diameter: 450 mmCutting area around 450 mm saw blade: 150 mmsquare: 140 mmFlat material at 90 °: 400 x 30 mmFlat material at 45 °: 280 x 30 mmSaw blade feed stepless: 0 - 1150 mm / minStepless speed range: 6 - 48 m / minDrive power saw motor: 3 / 3.6 kWDimensions: 1100 x 1100 x 1650 mmWeight approx .: 1200 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 275 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: square: 80 mm capacity 90 degrees: flat: 100x70 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 70 mm capacity 60 degrees: flat: 80x60 mm total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5 x0,85 x0,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm capacity 90 degrees: round: 80 mm capacity 90 degrees: square: 70 mm capacity 90 degrees: flat: 95x60 mm capacity 45 degrees: round: 70 mm capacity 45 degrees: square: 60 mm capacity 60 degrees: flat: 65x60 mm total power requirement: 1,0 kW weight of the machine ca.: 0,075 t dimensions of the machine ca.: 0,3 x0,8 x0,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm : 180 x 100 mm Working height: 925 mm saw blade turning speeds: 15 - 150 U/min total power requirement: 5,5 kW weight of the machine ca.: 0,615 t dimensions of the machine ca.: 1,4 x 1,4 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal circular saw Fabr. MEP type Tiger 300Machine -No: 004968 / RPDCUTTING AREAS:0 ° round: 90 mm0 ° square: 85 x 85 mm0 ° flat: 150 x 70 mm45 ° round: 90 mm45 ° square: 85 x 85 mm45 ° flat: 90 x 60 mm60 ° round left: 60 mm60 ° square left: 60 x 60 mm60 ° flat left: 60 x 80 mmSaw blade size: 300 x 32 x 2.5 mm2 speeds: 30/60 rpm.Vise opening: 155 mmDrive power: 1.5 / 1.8 kWWeight approx: 215 kgWith- Underframe- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 355 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 120 x 106 mm capacity 90 degrees: flat: 102 x 197 mm : 25,4 mm connected load frequency: 230 V total power requirement: 2,3 kW weight of the machine ca.: 28 Kg Dimensions (LxWxH): 0,6 x 0,35 x 0,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal Circular Saw Fabr. OPTIONS Type WK IIIFabr. -No: 10624 Year 1981Saw blade diameter max: 350 mmCutting area 90 ° round: 125 mmxa0xa0xa0 90 ° rectangle: 240 x 70 mmxa0xa0xa0 45 ° rectangle: 120 x 70 mm2 cutting speeds: 30/70 rpm.Motor power: 1.0 / 1.6 kWExternal dimensions: 630 x 600 x 1500 mmWeight: 540 kgWith- Saw blade can be adjusted by 360 °- Longitudinal thrusts and every miter possible- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

closing pressure: 11000 kN clamping plate: . mm distance between columns: . mm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: m Mold spraying machine available Manufacturer Acheson Model DAG 1000 FCT 2TB Year of construction 2002 Foundry robot available Manufacturer ABB Model IRB 6600 Control S4C-Plus Built in 2003 Deburring press available Manufacturer rice Model SEP 9-65 Built in 1988 Delivery time October 2018 An oven can optionally be purchased: Manufacturer Westofen Model W 90 SMC Capacity 900 kg Built in 1988 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal miter circular saw make KASTO type GKS 400 PMachine -No: 3111101003, built in 1995Saw blade dimensions: 400 mmCutting area 90 ° round: 130 mmCutting area 90 ° flat: 260 x 80 mmCutting area 90 ° square: 120 x 120 mmCutting area 45 ° round: 130 mmCutting area 45 ° flat: 180 x 80 mmCutting area 45 ° square: 110 x 110 mmCutting area 60 ° round: 90 mmCutting area 60 ° flat: 130 x 80 mmCutting area 60 ° square: 90 x 90 mmCutting speed: 11/22 m / min.Drive power: 5 kWWeight: 1080 kgOutside dimensions approx: 1250 x 1205 x 1900 mmWith- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Metal circular saw make KALTENBACH type KKS 401Machine -No: 113025 Year 1991Saw blade size: 375 - 425 mmCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 x 120 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmCutting width: 5.0 mmSaw blade hole: 50 mmSaw blade feed speed: 0 - 1200 mm / min.Opening stroke of the vice: 160 mmTurntable adjustment stepless: + - 60 °Cutting speed: 10 - 60 m / min.Drive power: 5.5 kWWeight approx: 1.35 tOutside dimensions approx: 1360 x 720 x 2100 mmWith- aut. duty cycle for straight and oblique cuts- mot. Transmission adjustment- hydr. Drehtischklemmung- hydr. Turntable rotation- mot. saw gear adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer an ...

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 410 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 0 t Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 5 to Execution supports Table length: 150 mm Table width: 120 mm Fixed stroke: 30 mm Distance from table to slide: min.: 25 mm max: 145 mm Machine´s weight about: 51 kg Overall dimensions machine: Length: 350 mm Width: 250 mm Height: 550 mm

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

Capacity: 0 t Diameter: 0 mm Length: 0 mm CN sections bender Manual and Automatic mode for forming discontinuous radius shapes such as Ovals Volutes Ellipses Parabolas     Horizontal and vertical:H + V  Shaft Ø:               100mm Number of rolls:       3 Horizontal:            Yes  Vertical:              Yes  Resistance moment:     33CM³ Capacity flat:         100x 20 mm Capacity Tube:         114,3 x 3,6 Ø x mm Capacity bar:          90 x 5 mm Capacity T-Profile:    100 x 100 mm Capacity HEA-Profile:  120 x 58 mm Working speed:         2,5 - 5 - 7,5 mm/min. Length:  ...

Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 230/400 volts / 50 Hz / 1.2/0.68 A / 0.270 kW Cutting thickness adjustment without offshoot: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knives including original knife grinder including original operating instructions Power current / 16A CEE plug Year of construction: 2006 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Capacity: 0 t Diameter: 120 mm Length: 0 mm MACH - ID 6233 Make: PULLMAX KUMLA Type: Z-60 CNC Control: PS/R - CNC V5 YOP: 1993 Horizontal and vertical    H + V Shaft Ø    120 mm Number of rolls   3 Resistance moment     56 CM³ Capacity flat    125 x 20 x 1300 mm Capacity Tube     115 x 1200 mm Capacity bar       65 x 65 x 1000 mm Capacity T-Profile     120 x 120 x 13 x 1200 mm Capacity HEA-ProfileUNP     240 x 1800 mm Working speed     6,6 / 6,5 M/Min mm Dimensions Length      1.830 mm Width       1.540 mm Height      1.600 mm Weight      4.600 kg

Capacity: 150 t Diameter: 470 mm Length: 300 mm SPECIFICATIONS Hydraulic / Mechanical HydraulicHorizontal / Vertical / or H + VH + V Shaft Diameter ø170 mm Roll diamter ø470 mm Shaft length300 mm Working speed M/Min.1/8 M/Min Capacity HEB 160 x 160 x 15 x Diam = 1600 mm Capacity Flatt 150 x 25 x Diam = 1500 mm  Power  16 DIMENSIONS Length  3400 mm Width  3390 mm Height  2800 mm Angle 150 x 150 x 16       Ø 1.500Angle 140 x 140 x 15       Ø 1.400T       120 x 120 x 14       Ø 1.200T       160 x 160 x 15       Ø 1.600Flat   150 x 25            &nbs p; Ø 1.500

Capacity: 0 t Diameter: 400 mm Length: 180 mm

Capacity: 0 t Diameter: 0 mm Length: 0 mm SPECIFICATIES Werking Hydraulisch / Servo / Mechanisch  Mechanical Horizontaal en of verticaal  Hor. As diameter Ø200 mm  Rol diameter Ø350 mm As lengte in mm    630 mm Werk snelheid in M/Min.   4.5 - 9 M/Min Buig capaciteit  IPN  120 x R 2500 mm Buig capaciteit  HEB220 x 22 x R 3500 mm Buig capaciteit  Buis  1 33 x 6,0 mm Vermogen in Kw   15 kW kW AFMETINGEN Lengte 2100 mm Breedte 2000 mm Hoogte 2100 mm  

Capacity: 0 t Diameter: 145 mm Length: 0 mm Make Comac Galileo 4 Type Galileo 40 Year 2011 Profile bender comac galileo 40 Outside diameter max. (mm)Section modus 6 cm3 Inside diameter max. (mm)Shaft diam = 45 Max. pipe length (mm)Roll diam = 145 Max. angleSpeed = 3,7 M/min Wall Thickness (mm)Tube 70 x 2 x 2000 Flatt 60 x 10 x 600 mm Bar 35 x 35 x 600 mm Manipulator Hor & Vert  

Capacity: 360 t Diameter: 140 mm Length: 0 mm Make Roundo R 5 S Type R 5 S Year 1989 Section modulus 50 cm3 Outside diameter max. (mm)Top shaft = 140 mm Inside diameter max. (mm)Lower shaft = 120 Max. pipe length (mm)Rolls = 360 Max. angle Power = 11 kW Wall Thickness (mm) Weight 4000 Kg Tube = 142 x 1.800 mm HEA = 140 x 900 mm Some tooling  

Brand: CFT Model: TE Series Manufacture year: 2002 Production capacity: 15 tn per hour The series has been designed to improve the already superior performance of its predecessors, the MANZINI TE. 15 and TE.30. While preserving the important characteristics of its truncated cone-shaped screen, this new design permits a rapid changeover (without removing the paddles) because the narrow end of the conical screen is at the front of the unit, beneath the cover. The series of turboextractors has a peculiar characteristic: product emulsion due to air trapped within the product. In fact, the infeed of product is located on a completely closed cover and the centrifugal action of the paddles against the conical wall produces an impingement effect in the direction of product flow that helps pomace conveyance towards the expulsion channel. Turboextractors are specifically designed for e ...

Machine type: Aluminum circular saw machine Manufacturer: KALTENBACH Model: TL 200 Condition: good Offer type: used machine Specifications: Cutting range: Ø 55 mm, Leaf Ø: 200 mm Drive type: el./mech. Drive: 0,75 kW, 400 V Remark: portable Weight: 50 kg The machine is in a good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.

Capacity: 0 t Diameter: 42 mm Length: 3000 mm Max.Tube Ø:        42mm Min. Tube Ø:       6mm Max. Wall thickness:2,5 mm Max. Bending radius:270mm Min. Bending radius:25mm Max. bending length:3.000mm 3e dimsion bending:360,000 mm/min. Power:             5.5kW Length:            4.700 mm  Width:             1.300 mm  Height:            1.600 mm  Weight:            3.750 kg 

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment without offshoot: 0 to 24 mm Knife diameter: 330 mm Stainless steel knives Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size angular: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Footprint (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages                            Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator

Qty. 1 Second-hand copper rolling mill Material: Copper & Copper Alloy (Pbc, Etc.), Aluminium, Etc. Manufacture: Hitachi(Japan) Type: 4-Hi Reversing Rolling Mill Strip Width: Max 450 mm Thickness: 0.3 mm ~ 4.0 mm (Copper) Line Speed: 100 m/min. Coil Weight: 5,000 kg Manufacturing Date: 1963 1st Revamping Date: 2008 2nd Revamping Date: 2010 3rd Revamping Date: 2020. 05 Revamping: Mill Housing Clean & Painting Improvement of Screw Down System (Ram Cylunder --- Geared Motor) Change of Deflector Roll & Press Plate Right/Left Reel: Increase Capacity Right Reel: 30 kW, 200/500 RPM – 110 kW, 650/1,800 RPM, Left Reel: 30 kW, 200/500 RPM – 75 kW, 400/1,500 RPM Change of Drive for 2-Coil Car: Hydrauric Cylinder – Geared Motor

saw blade diameter: 315 mm capacity 90 degrees: round: 108 mm capacity 90 degrees: square: 93 mm : 150 x 90 mm Working height: 920 mm saw blade turning speeds: 17+33 oder 33+66 U/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,328 t dimensions of the machine ca.: 0,8x0,9x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC circular saw machine make BERG & SCHMID type VKS 370 VA-CNCYear of manufacture 2002Technical specifications:Cutting range 90 ° round: 120 mm: 90 ° square: 100 mm: 90 ° flat: 180 x 100 mm: 45 ° left round: 120 mm: 45 ° left square: 100 mm: 45 ° left flat: 130 x 100 mm: 60 ° left round: 110 mm: 60 ° left square: 90 mm: 60 ° left flat: 90 x 100 mm: 45 ° right round: 105 mm: 45 ° right square: 100 mm: 45 ° right flat: 130 x 100 mmSaw blade dimensions: 370 x 3.0 x 40 mmWorking height :: 925 mmMotor power :: 3.0 kWFootprint approx .: 1900 x 1450 x 2100 mmWeight approx .: 744 kgWith- CE marking- Sirio control- discharge deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for  ...

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Used cold circular saw Internal machine number m3331 Manufacturer Kaltenbach Type TL 500 Ma.Number 14238 Year of construction unknown Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as e.B. technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Metal Circular Saw Semiautomat Fabr. FABRIS type SA 300Machine -No: 537, built in 2010Saw blade diameter: 300 mmDrive power: 1.1 / 1.5 kWWith- CE mark- Cooling device- aut. Vice- aut. saw blade feed- several saw bladesUsed, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS IFabr -No: 9000150Saw blade diameter up to: 275 mmCutting area 90 ° round: 90 mmxa0xa0xa0 flat: 75 x 120 mmxa0xa0xa0 45 ° round: 90 mmxa0xa0xa0 Profiles: 75 x 80 mm2 saw blade speeds due to pole-changing motor: 40/80 rpm.Drive motor: 380 V, 1.4 / 1.9 kWDimensions L x W x H: 600 x 600 x 1500 mmWeight approx: 170 kgWith- Underframe- Coolant pumpused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw (chop saw) make IPB Pedrazzoli type Brown MasterSaw blade diameter: 275 mmMiter adjustment via turntable: 0 - 45 ° left2 saw blade speeds: 55/85 rpm.Drive power: 2.5 / 3 kWSpeeds Engine: 1400/2870 rpmExternal dimensions W x D x H: 1000 x 650 x 1800 mmWeight approx: 200 kgWith- on underframe- Quick-action vise- Length stop- Cooling device- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel underfloor circular sawing and centering machine KALTENBACH type RKF 370Fabr. -No: 19 282Sawing area round: 130 mmSaw blade diameter: 370 mm3 cutting speeds hard / medium hard / soft steel: 11, 15, 23 m / minCoolant: waterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make EISELE type VMS IIMachine -No: 24968 Year 1973Saw blade diameter: 300 mmCutting area flat: 160 x 80 mmflat 45 °: 120 x 80 mmAngle iron 90 and 45 °: 80 x 80 mmU-iron 90 °: NP 16U-iron 45 °: NP 12Tubes 90 + 45 °: 100 mmDouble-T 90 °: 160 x 74 mmDouble-T 45 °: 120 x 58 mmSolid material: 100/75 mmSaw blade speeds: 20/40 rpm.Drive power: 1.4 / 1.9 kWDimensions: 750 x 900 x 1650 mmWeight approx: 300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw make RURACK type VS 300-03Year 1995Cutting area flat: 125 x 90 mmCutting area flat / miter: 95 x 85 mmCutting area angle iron: 125 x 90 mmCutting area Miter: 95 x 85 mmCutting area pipes: 100 mmSaw blade size: 300 x 2.5 x 40 mmDrive power: 1.6 / 2.1 kWWeight: 230 kgExternal dimensions: 550 x 800 x 1700 mmWith- Cooling device- Underframeused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Transportable metal circular saw make EISELE type TKS - G / 225Machine -No: 2254 Year 1985Saw blade size: 275 mmCutting area 90 ° round: 90 mm: 90 ° square: 80 x 60 mm: 45 ° round: 60 mm: 45 ° square: 60 x 40 mmSaw blade speed: 58 rpm.Vise swiveling: 90 - 45 °Drive power: 0.65 kWPower connection: 220 V / 50 HzWeight approx: 38 kgOutside dimensions approx: 640 x 320 x 350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Horizontal long-cut cold circular saw make TRENNJÄGER type PMC 6Machine -No: 282, built in 1989Saw blade diameter: 460 mmCutting height: 150 mmCutting area at 90 °: 650 x 150 mmCutting area at 45 °: 450 x 150 mmWorking height: 850/950 mmExternal dimensions: 2300 x 820 x 1900 mmWeight: 1500 kgWith- 3 vertical hydr. clamping cylinders- miter device- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools