130,511 used machines on RESALE, but how to find them? Machine Search
Incineration plant for solvents from exhaust air This equipment is connected to a flexographic printing machine and meets the EU standards. Number of reactors = 3 Exhaust air volume maximum 7500 m3/h Exhaust air volume minimum 1750 m3/h The plant's burner was renewed in 2023
Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor
General description Industrial tumblast shot blasting machine manufactured by OMSG (Officine Meccaniche San Giorgio), designed for batch processing of small to medium metal parts. Suitable for cleaning, deburring, descaling, and surface preparation in foundry and metalworking environments. Technical details Manufacturer: OMSG (Italy) Year: 1993 Type: Tumblast / tumble belt shot blasting machine Operation: Electric with automated blasting cycle Configuration: Rotating perforated drum/belt system for bulk processing Blasting system: Internal chamber designed for steel shot blasting (turbine-based typical configuration) Loading: Pneumatic front door with actuator Control: Electrical control cabinet with contactors, relays, and frequency inverter (ELDI/DF) Dust extraction: Integrated filtration/separation unit with vertical filter and ducting Application: Batch treatment of sm ...
Key data: 2000 , 678 , 60
Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way
Key data: 3500 , 1212 , 70
Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:
Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg
For sale is a radiator module from JCB with intercooler and engine radiator from 2021, the radiator is unused. Condition: as good as new (only test run in the factory) JCB Part Number: 320/04847 Total Part Number: MN422200-03300B Case Part Number: MN122110-6013 Water Chiller Part Number: MN422135-0410 Intercooler Part Number: MN127100-4310 F4KAKT1845 Intercooler also fits John Deere and Yanmar We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!
For sale is a functional, well-preserved Krones Linatronic empty bottle inspector. Specifications: Manufacturer: Krones Model: Linatronic Year of Make: 1997 Quantity: 1 pc. Capacity:- Voltage: 230/400 V Frequency: 50 Hz Length: 250cm scaffolding + 70cm overhang towards filler Width: 110cm Height: 280cm Equipment: Formats see pictures
FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...
BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...
PERO – Industrial Parts Washer (Conveyor Type) General data: Manufacturer: Pero (KG Masch.- u. Apparate-Bau Ing. P. Erbel / Pero GmbH, Germany) Year of manufacture: 1992 Machine type: Industrial parts washer (continuous conveyor system) Condition: Used Weight: approx. 2500 kg Dimensions (L x W x H): approx. 4000 x 1800 x 2000 mm Technical details: Power: approx. 12 – 18 kW Voltage: 380 V Frequency: 50 Hz Nominal current: approx. 18.9 A Heating capacity: approx. 12 – 18 kW Working conveyor width: approx. 300 – 400 mm Process: Multi-stage cleaning system: - Washing (chemical cleaning) - Rinsing - Drying (with pneumatic system) Equipment: Roller conveyor feed system Filtration tank Pump unit Enclosed cleaning chamber PLC-based control panel (older generation) Description: Industrial conveyor-type parts washer designed for continuous cleaning and ...
Very nice and young complete Ammonia Bitzer screw pump system. The pump system exists out of one Bitzer OSNA8571K screw compressor, a 110 kW WEG E-motor, oil separator, Low pressure separator, economizer, air-cooled oil cooler, air-cooled condenser and a control panel with Siemens PLC. The Bitzer compressor is driven by a 110 kW Vacon inverter. Capacity is 91kW at 60Hz and -35/+40°C (with 50Hz capacity is 75kW). All documentation is available. Also visit our website: used-refrigeration
Electrical coil connecto General description Mixed industrial spare parts lot including electrical, hydraulic, mechanical components, and consumables. Suitable for maintenance, repair operations (MRO), or parts recovery. Technical details Type: Industrial spare parts (mixed lot) Configuration: Assorted components stored in bins Electrical components: - Circuit breakers and protection modules (ETI) - Control relays and timers - Terminal blocks and connectors Cables and sensors: - Industrial wiring harnesses - Metal-sheathed cables (likely temperature probes / sensors) Hydraulic / pneumatic components: - Valve blocks and fittings (KBP / similar) - Brass valves and connectors - Actuator housings Mechanical parts: - Gears, bushings, couplings - Bearings and sleeves Consumables: - Bulbs (Philips) - Lubricants and chemical tubes Application: Maintenance and spare parts ...
Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2 ...
Equipped with 2 HBM weighing sensors Auction-ID: A1-45845-33
Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...
Equipped with 4 weighing sensors Auction-ID: A1-45845-32
Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures
General description Industrial storage rack system with multiple bins containing assorted fasteners, fittings, and workshop components. Suitable for maintenance departments, workshops, or resale as a bulk hardware lot. Technical details Type: Industrial storage system with contents Configuration: Multi-level steel rack with integrated storage bins Contents include: - Bolts, screws, and threaded fasteners (various sizes, including labeled M24, M16, etc.) - Nuts, washers, and spacers - Industrial connectors (CEE plugs and sockets visible) - Small machined parts and metal components - Mixed workshop hardware and accessories Organization: Partially labeled bins (alphanumeric system visible) Quantity: Large volume across multiple compartments Application: Maintenance, repair, and industrial assembly environments Equipment - Steel shelving system - Metal storage bins (mult ...
Automatic ingredient dosing and weighing with recipe computer Suitable for dusty, crushed, crystalline, granular products such as salt, sugar, baking aids, spices Dimensions: Length: 3760 mm Width: 750 mm Height: 1880 mm 14 containers with a volume of up to 60 litres Stainless steel Discharge type:Vibro-discharge apparatus 0.085 kW Discharge via: Weighing conveyor belt Dosing accuracy: 10 to 15 grams Dosage quantity/component: up to 10 litres Total dosage: up to 20 litres Discharge capacity: 2 - 10 kg/min (depending on the material)
Hydraulic injection moulding machine manufactured in 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mold height of 1530 mm. It has a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG 420/810 - 2300 machine we have for sale. Contact us for further details.
Beckhoff C6220 Industrial Control Cabinet PC for Heinen( Diana Control) Control Jagenberg Diana Pro. Used, tested.
maximum number of results exceeded
please refine your search
100 € 
