cold feed in used for sale

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/77/H53 mm -Total weight: 1.8 kg

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 87/79/H55 mm -Total weight: 2,0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/75/H55 mm -Total weight: 2,0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 105/150/H70 mm -Total weight: 4.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/80/H65 mm -Total weight: 2.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/80/H125 mm -Total weight: 5.6 kg

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H55 mm -Total weight: 2.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: soft top jaw set, 3 pieces -Width: 30mm -Total dimensions: 95/90/H55 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 160/110/H70 mm -Total weight: 7.7 kg

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece unstepped top jaw set -Width: 40 mm -Bore: Ø 17 mm -Total dimensions: 140/120/H70 mm -Total weight: 7.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Type: FWB 315/425 -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 145/110/H62 mm -Total weight: 6.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set -Width: 30mm -Bore: Ø 9 mm, distance 38 mm -Total dimensions: 100/90/H50 mm -Total weight: 2.6 kg

Machine condition: cleaned and tested Year of construction: 2013 Main motor incl. Mentor control suitable for KBA RA 106 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 24 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/90/H75 mm -Total weight: 3.4 kg

W&P GUV Fermentation Interrupter Rational work/working time management Shifting working hours from night to day the goods are ready for baking in the early morning Optimal use of furnace capacity Improving the quality of the dough pieces Year of construction: 2011 digital control Dimensions approx. 1900 x 3200 x H 2500 mm, Equipped with HYGROMATIC humidity regulator Condition: used: Auction share: 1x GUV fermentation interrupter For connection to an external refrigeration unit (not included) More bakery equipment - new and used - can be found in our shop! International shipping costs on request!

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 60/75/H60 mm -Total weight: 1.4 kg

Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Manual pneumatic press Make IML Model M4 Year 2015 ? Details for all kinds of pressing jobs, for instance eyelets, thumbhole rings, corner attaching, works solely on compressed air Condition show room machine Available Direct

Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 60/60/H50 mm -Total weight: 0.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 34 mm -Dimensions: see photo technical drawing -Total dimensions: 135/105/H80 mm -Total weight: 6.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Total dimensions: 130/90/H75 mm -Total weight: 4.3 kg

1. TBA/19 - Model 30 V - YOM: 2009 - Capacity 7500 p/h (currently reduced to 4000 p/h) - Package type TWA 200 Slim - running hours: 9000 2. Straw applicator - Model: SA1 - YOM: 2009 - Straw type: U4/180 - Running hours: 18,000 3. Cardboard Packer - Model CBP78 - YOM: 2008 - Packaging Pattern 1x8 Running hours: 1800

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 50/55/H35 mm -Total weight: 0,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H30 mm -Total weight: 0,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/55/H45 mm -Total weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 55/55/H35 mm -Total weight: 0,4 kg

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H45 mm -Total weight: 0,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H45 mm -Total weight: 0,8 kg

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 60/55/H25 mm -Total weight: 0.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 55/55/H40 mm -Total weight: 0,6 kg

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs

Agilent G 1362 A RID Detector Refractive Index Range 1.00-1.75 RIU Measurement Range +/- 600x 10-6 RIU Sample Cell 8 ul Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 60/55/H40 mm -Total weight: 0,7 kg

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 19 mm -Dimensions: see photo technical drawing -Total dimensions: 70/55/H45 mm -Total weight: 0,9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/65/H55 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece soft jaw set -Width: 20mm -Total dimensions: 84/60/H40 mm -Total weight: 1.1 kg