cold feed in used for sale

Semi-automatic slicer / slicer Bizerba Type: VS 12 A Technical data: 400 Volt / 50 Hz Year of Make: 2017 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth including original Bizerba knife sharpener with normal carriage for sausage or cheese Power current / 16A CEE plug Function checked, machine immediately ready for use Condition, see original pictures!

Key data: 400 mm

Cold circular saw Make: Kaltenbach Type: KKS EG-H/M45NC Built in 1995 Semi-automatic cold circular saw Vertical saw with cut from below and rotating saw table -Saw blade Ø 400 mm -Hydraulically adjustable saw blade feed -Coolant pump for coolant flow -Pin and chip scraper -Adjustable workpiece stop for using the full working width -Rotary table for oblique and longitudinal cuts, rotation range 90° to each side Max. sawing capacity: Fl. 300x40 mm, or 120x120 mm Height: 1860 mm Width: 1070 mm Depth: 800 mm Weight: approx. 900 kg with infeed roller conveyor 6 m and with discharge roller conveyor 3 m with controlled measuring carriage (M45NC) programmable, automatic operation little used Technically good condition Visually good condition Machine is still in commercial use and can be viewed by appointment. Transport from the hall an ...

Inclined Slicer Slicer / Slicer BIZERBA GSP H Technical data: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife including orogonal Bizerba knife sharpener Luminous flux Year of construction: 2024 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer / slicer Bizerba Type: VS 12 D Technical data: 220-240 Volt / 50/60 Hz / 2.6 A Year of construction: 2024 Fully automatic machine, can also be used as a semi-automatic machine at the touch of a button Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original Bizerba knife sharpener with normal carriage for sausage or cheese including stainless steel underframe trestle on castors with parking brakes Luminous flux / Schuko plug Function checked, machine immediately ready for use Condition, see original pictures!

Slicer with scale / slicer Bizerba Type: VS12 W Technical data: 400 Volt / 50 Hz Year of Make: 2020 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife with normal carriage for sausage or cheese with integrated checkweigher up to 3 kg Power current / 400V CEE plug Function checked, machine ready for immediate use! Original price approx.: EUR 8.650,- Condition, see original pictures! If you have any questions, email or call.

Additional technical specifications: • Material feed support length: approx. 1900 mm • Material discharge support length: approx. 5000 mm • Hydraulic clamping: available • for miter cuts

: gebraucht : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 2970 € : 1 : 300 mm : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm : 1050 mm : 990 mm : 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via ...

saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: Cold master Type: Vista Stainless steel: Yes Electric connection: 230 V Total dimension L: 70 mm Total dimension W: 65 mm Total dimension H: 51 mm Material: Rvs There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-37

General Description Wide-format hot/cold roll laminator manufactured by FayonLami . Designed for laminating and mounting printed graphics, signs, posters and other flexible wide-format media. The machine features powered roller operation with adjustable temperature, speed and media handling controls. Technical Details Manufacturer: FayonLami Machine type: Wide-format hot/cold roll laminator Working width: Approx. 1,600 mm Hot and cold lamination modes Powered roller drive Digital temperature display and adjustment Variable speed control Adjustable roller pressure / gap Multiple media unwind and rewind shafts Suitable for liner-backed and linerless film configurations Foot pedal control Emergency stop Auction-ID: A7-50518-9

Cold circular saw automatic - CNC control - Micro spraying device Saw blade diameter 370 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height 925 mm Saw blade speeds 17 - 70 rpm Total power requirement 3.0 kW Machine weight approx. t Dimensions approx. 1.8 x 1.1 x 2.0 m Very well maintained machine Auction-ID: A7-50523-896

Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data Manufacturer: KOSME Model: F ...

Ilkazell Refrigeration/Freezer Chamber -External dimensions: 2450 x 1600 x 2300 mm - Internal dimensions: 2250 x 1400 x 2100 mm -Plate thickness: 100mm -Door clearance: 800 x 2000 mm -Stainless steel floor -Generator and cooler included -Stock: 1 piece -Compartment easy to install

Slicer Treif -Model: DIVIDER Orbital+ -Power: 7.5 kW -Year of manufacture: 2014 -Capacity: up to 1200 cuts/min -Max. slice thickness: 0.5–25 mm -Max. product length: 850 mm -Belt width: 420 mm -Includes a knife sharpener -Knife sharpener model: HS DIVIDER ORBITAL -Outer dimensions of the sharpener: 580 x 640 x 400 mm -Sharpener year of manufacture: 2015 -Power supply: 380V 3Ph 50Hz -Suitable for slicing: meat, cheese, fish -Made of stainless steel -Outer dimensions: 3200 x 1200 x 2350 mm -Weight: 850 kg -Condition: Used in very good condition, ready to work

HESS Technology JULIA vertical assembly press from 2002, designed for professional assembly and clamping work in carpentry. The machine has a large vertical frame with a perforated work surface allowing different configurations for positioning and holding the parts. The set includes a large set of bars, rails and clamping accessories to adapt the working configuration to the different elements to be assembled. Professional machine with robust construction, suitable for carpentry, layout and furniture workshops. HESS Technology JULIA vertical press Year 2002 Large perforated vertical frame Adjustable clamping systems Set of clamping bars and rails Accessories and clamping devices visible in the photos Professional metal construction Auction-ID: A3-46129-41037

Kaltenbach KKS 400 cold circular saw – Ø400 mm – hydraulic – including 2 roller conveyors Specifications: Brand: Kaltenbach Type: KKS 400 Serial Number: 53096 Version: semi-automatic cold circular saw / metal circular saw Maximum saw blade diameter: Ø400 mm Sawing principle: saw blade moving from bottom to top Cutting capacity 90° round: approx. Ø130 mm Square cutting capacity: approx. 120 × 120 mm Cutting capacity flat material: approx. 305 × 20 mm Machine weight: indicatively approx. 850–900 kg, excluding roller conveyors Roller conveyor 1: approx. 3,600 × 480 × 925 mm Roller conveyor 2: approx. 2,500 × 300 × 960 mm Features: Hydraulically controlled and adjustable saw feed Hydraulic material clamping Heavy Duty Vertical Clamping Device Swivel table saw for straight and mitre cuts Left and right miter setting Control panel with saw and mate ...

Conditioned with temperature control. Freezer construction is from 2014. N1 toll control Auction-ID: A1-47419-139

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2017 Machine with particularly few sled lifts! Total number of sled lifts: 7,075,699 Machine has been overhauled by a specialist Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg

Used cold light source from Schott with electronic brightness control for reflected light and transmitted light illumination in laboratories, microscopy and industry. The device works with a 15 V halogen lamp with 150 W and is equipped with a fiber optic connection. It is suitable for use on stereo microscopes, macro lenses and other optical systems that require homogeneous, bright cold light illumination. The device is used and shows normal signs of use due to use. The front controls are completely present; the device was last operated in an industrial environment and bears a DGUV V3 test sticker. Scope of delivery: 1 cold light source Schott KL 1500 electronic power cable Partly without bulb Type: KL 1500 electronic Bulb: halogen lamp 15 V / 150 W Voltage: 230 V~ Frequency: 50–60 Hz Power consumption: 320 VA Brightness control: electronic, multi-stage ― Length: approx. 30 ...

Mobile pressure washer with 3-piston axial pump (aluminium head, stainless steel pistons), Total Stop, pre-wash/wash selector, detergent tank, 8 m hose on reel. Condition: New, never used, in its original box. Specifications (plug optimachines.com): • Power supply: 220 – 240 V • Motor power: 2.2 kW • Max. pressure: 120 bar • Max. flow rate: 460 l/h • Max. water inlet temperature: 50 °C • Electrical cable length: 5 m • Dimensions (L x W x H): 330 x 307 x 790 mm – net weight 11.6 kg Carton size: 34 x 36 x 82 (cm) Auction-ID: A1-50698-22

Semi-automatic/fully automatic Cutting thickness 0.5 - 8mm, (without offshoots up to 24mm) ideal for meat or sausage/cheese Knife diameter 330mm with automatic acceptance of the section dig. Control Material to be cut: max. 250 x 120 mm with base frame

Delta Technics Engineering cold room with MCS-17 cooling installation, built in 2011. Equipped with digital ALFA 735 temperature control, interior lighting and separate control for cooling operation. The installation works at 230 V / 50 Hz. The cold store is working and cools properly. A cold store temperature of 3°C is indicated on the control. Rating plate data: serial number 02943, test pressure 33 bar and pre-pressure 4 bar. See photos for a further impression of the execution and condition. Auction-ID: A3-46133-22107

Fully automatic slicer Used machine with digital control Knife size: 330 mm with automatic filing, programmable, Stepless cutting thickness adjustment: 0.5mm to 10mm Carriage for 400 mm clamping length 180cm width with base frame

equipped with 16 sandwich panels; Dim. approx. 1200x3150 mm; 5 sandwich panels; Dim. approx. 1200x7200 mm; thickness approx. 140 mm; incl. (2x) evaporator with 4 fans; (1x) refrigeration compressor and (1x) dismantled overhead door; width approx. 6500 mm Auction-ID: A1-50542-18

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 - overhauled, in gut condition Belt width 600 mm Belt length 810 mm Total length 1360 mm Width 1210 mm Height adjustable from 1010 to 1260 mm Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200 Year 1992 - Serial-No. H-200 2 Feeder for CMC Inserting Machine

Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

Serial No.:553776/1, length 490 mm New from stock liquidation Auction-ID: A1-50529-529

Lot title: Pre-rolling mill / Feed hopper C. Rijkaart Extruder 500 – Industrial rolling line Brand: Machinefabriek C. Rijkaart B.V.Model : EXTRUDER 500 Year: 1991 Internal reference: 801590 C. Rijkaart B.V. industrial pre-rolling mill, Extruder 500 model, intended for feeding an automatic rolling line. Machine installed upstream of a Rondo 5-head industrial rolling mill. It receives the bulk pulp in its large hopper, pre-flattens it and forms a regular strip before the rolling stations. Known characteristics: Manufacturer: Machinefabriek C. Rijkaart B.V. – Asperen, The Netherlands Type: Extruder 500 Machine No.: 801590 Year: 1991 Power supply: 380 V three-phase – 50 Hz Large feed hopper Pre-rolling / pre-flattening roller Output on conveyor belt Industrial construction mainly made of stainless steel. Auction-ID: A1-50735-3

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

Rubberized, encapsulated vibrating channel with 2 outlets and 3 inlets of 200 mm , with 2 unbalance rs of 1.8 kW / 960 UPM. Rinne was used to press up 2 side-by-side Mogensen-Sizern.

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

approx. 70 m³ / 70,000 litres polyester tank, upright standing flat bottomed tank, above ground, with multiple connections and spouts. volume: approx. 70 m³ / 70,000 litres material: polyester / GRP diameter: approx. 3.00 m tank height: approx. 10.00 m overall height: approx. 10.50 m The tank has been newly painted and is in a good condition. The container can be used as a storage tank for liquid feed, whey, molasses, water, slurry, or as rain drip tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offer ...

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

; operational

; operational

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052