cold feed in used for sale

- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...

Keg cleaning, filling and palletising system, consisting of the following components: - Keg external washer Schöttinger & Schäfer, year of manufacture 1987 Model: AW 2RB - Keg filling system Leifeld & Lemke, Year of manufacture: 1988 Consisting of: 1 line for pre-cleaning, KVR 1, Capacity: 140 kegs/hour 2 lines for main cleaning and filling, KRF1 and KRF 2 Capacity: 120 kegs/hour - CIP system with 5 containers Year of manufacture: 1988 - Palletising and depalletising RST Year of manufacture: 1999 with pallet magazine and palletising robot (KUKA KR 125/1), Additional title: Keg cleaning and filling system with palletising; built 1987 - 1999, Capacity appr.: 120 Kegs/h, Operation / Control: Simatic S7-300, Features: External washer; pre-cleaning, main cleaning and filling lines; CIP system; palletising with pallet magazine and robot

Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

KEG Filling Plant, Additional title: Semi-automatic keg filling system, Performance approx.: 50 KEG/h, Power: 2,5 kW, Voltage: 230 V, Frequency: 50 - 60 Hz, Heating / Cooling: steam 1.5 - 2 bar, < 125°C, Water: 2 - 3 bar, 80°C, Compressed air: 5 - 6 bar, Length: 860 mm, Width: 760 mm, Height: 2530 mm, Weight: 130 kg, Formats: Combi fitting Ø 75 mm, World KEG fitting, Operation / Control: Control cabinet, Siemens 1200, Touch panel, Material: stainless steel, Position: free standing , Features: 1 filling station with elevating protective housing, Gravity roller conveyors in the inlet and outlet, control cabinet with control unit, switch panel for CIP or product inlet

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control, Additional title: Bottle inspection machine, Capacity: 8000 bottles/h, Voltage: 400 Volt, Frequency: 50/60 Hertz, Compressed air: min. 5 bar, Length: 2030 cm, Width: 950 cm, Height: 1830+conveyor height cm, Weight: 1600 kg, Running direction: from right to left, Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors, Position: free standing, Periphery: Synchronised container transport segments after the inspector

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

Labelling machine for neck, body and back labelling of glass bottles., Additional title: neck-, body- and back labeling, Capacity: 40000 Fl/h, Length: 2600 mm, Width: 2800 mm, Height: 2700 mm, Formats: various label tables 0.5L NRW, 0.33L Vichy, 0.33L Euro, Running direction: left -> right, Operation / Control: Simatic OP7-Panel, Krones KES 5, Position: free standing

Bottling line for approx. 5000 bottles/h, Additional title: returnable glass bottle filling, years of construction 1990 - 2016, Capacity: 5000 bo/h, Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l, Position: free standing, Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank

Control unit for checking beer crates for completeness. Also checks the bottle caps, including a conveyor stop in the event of problems., Additional title: with cap detection, Current: 4 A, Voltage: 230 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 0,7 m, Width: 0,74 m, Height: 2,1 m, Running direction: Crosswise, Features: inspection over closure detection, with integrated conveyor stopp

Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)

This PARAMIX system is used to produce high- and low-carbonated beverages. The process comprises the following steps: 1. Degassing of the water, 2. Dosing and mixing of water and syrup, 3. Carbonation of the finished mixture. The system was retrofitted by FAMIX in 2009 and expanded to include the following components: - CO₂ impregnation unit - CO₂ pressure-temperature ratio regulator type BMS7 The regulator, including the control cabinet, is to be completely renewed again when the device is purchased. The system is ideal for the reliable and flexible production of a wide variety of soft drinks. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: mixing unit 1983 - 2010, Capacity approx.: 15000 l/h Mixing and carbonating, Length: 2,9 m, Width: 2,5 m, Height: 2,5 m, Weight: 3000 kg, Operation / Control: mix ...

Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower  ...

Eima GmbH infeed hopper with transport screw and outfeed hopper on weighing cells with valve, s/s screw, diameter: 180 mm, tier: 120 mm, dimensions infeed hopper with transport screw: 2500 mm x 800 mm x 2500 mm, dimensions outfeed hopper: 1300 mm x 1300 mm x 2000 mm.

Schröder injector with s/s mobile filter tub, type: IMAX 420eco, number: IMAX420-1589-12, year of construction: 2012, 380-460 V, 50/60 Hz, 11 kW, 22 A, walking beam, clearance: 415 mm x 220 mm, total dimensions: 2350 mm x 1000 mm x 2100 mm, 2150 mm x 600 mm x 920 mm.

Grundfos high pressure installation consisting of 4 Grundfos circulation pumps, type: (2x) CRNE45-2-1 A-F-A-E-HQQE, (2x) CRE45-2-1 A-F-A-E-HQQE and 2 Grundfos steel pressure vessels, type: GT-U-100 V, dimensions: 2700 mm x 1370 mm x 1950 mm, 1900 mm x 1300 mm x 1520 and 1300 mm x 1350 mm x 1620 mm.

Nowicki injector, type: MH-4-120, machine number: 00400078, year of construction: 2000, 400 V, 3 Ph, 50 Hz, 4.5 kW, weight: 780 kg, s/s belt, belt width: 570 mm, clearance: 580 mm x 200 mm, 120 (2x 60) needles, total dimensions: 1850 mm x 850 mm x 1980 mm. Including Nowicki s/s filter tub, type: FBN-280/1, number: 90900020, year of construction: 2000, 380 V, 3 Ph, 0.8 kW, weight: 162 kg, dimensions filter tub: 1600 mm x 600 mm x 800 mm.

Limitech A/S double high shear mixer, inside dimensions: (2x) Ø 900 mm x 950 mm, total dimensions: 2050 mm x 1350 mm x 2500 mm. G. Mondini S.p.a. depositor, model: VF/SP-E, number: 2045-02/3, year of construction: 28/02/03, 400 V, 3 Ph, 50 Hz, dimensions: 1200 mm x 900 mm x 2200 mm.

Year of manufacture: 10 / 2017 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop system, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Maximum batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control system: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: Energy-efficient cleaning system with closed solvent circuit Excellent cleaning quality with minimal solvent consumption Ideal for precision engineering and metal-cutting industries The machine can be inspected und ...

Viewing by appointment Working condition Auction-ID: A1-43891-27

ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-47066-17

Including desk arrangement, approximately 5 workstations, size 5200x4600x3600 mm, 5 chairs, 2 louvered door cabinets, drawer unit and cupboard Auction-ID: A1-43894-80

Including desk setup 2800x3000 mm, conference table 1600x800 mm, 4 conference chairs, 2 movable desk chairs, 2 medium high model sliding door cabinets, computers and other equipment not included Auction-ID: A1-43894-76

Interchangeable trays for grabs 5 - 8t, width 500mm, capacity 180l, weight 145kg, load capacity 3000kg used Auction-ID: A7-47086-72

Viewing by appointment Specifications Type: dragline/drag excavator Own weight: ± 32,000 kg Boom (boom): often approx. 27 meters (with dragline version) Drive: diesel (power varies by version, typically ± 95–150 kW on comparable machines) Chassis: crawler Application: dredging, remote earthmoving, transhipment with grabs Auction-ID: A1-43891-52

Inline Pump Unit Auction-ID: A7-47065-2

Inline Pump Unit Auction-ID: A7-47065-1

ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-47066-9

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-47066-14

Power: 22 kW (30 hp); VSD (variable speed drive) Operating parameters: Working pressure 4–13 bar (adjustable); FAD 0.72–4.00 m³/min (25–141 CFM); noise ~67–70 dB(A); operating hours 64,000 h; dim. 1,330 x 870 x 1,725 mm; wt. 516 kg Workpiece capacity: Industrial compressed air supply; variable demand applications Supported edges: N/A Edge types: Compressed air generation; drying (integrated dryer) Included equipment: Rotary screw compressor; VSD inverter control; integrated air dryer (full feature); air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; energy-efficient VSD system for variable load operation 22 kW variable-speed rotary screw compressor with integrated dryer and adjustable pressure ran ...

Power: 22 kW Operating parameters: Working pressure 13 bar; FAD 3.45 m³/min; noise ~70 dB(A); operating hours 25,816 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation; drying (integrated air dryer) Included equipment: Rotary screw compressor; integrated air dryer; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2006; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for workshop and industrial air systems 22 kW rotary screw compressor with integrated dryer, 13 bar pressure and 3.45 m³/min capacity. Auction-ID: A7-47066-2

Motor power: 4 kW YOM: 1997 Operating hours: 0 (fully refurbished) Flow rate: ~0.55 m³/min at 8 bar Max. pressure: 10 bar Air tank volume: 90 l (integrated) Noise level: ~64 dB(A) Cooling: Air-cooled Electrical supply: 400 V / 3 Ph / 50 Hz Control system: Basic Connections: Air outlet: 3/4\" BSP | Condensate: 1/2\" BSP Dimensions (L x W x H): 600 x 630 x 850 mm Weight: ~150 kg Condition: Refurbished to \"as new\" with zero hours Features: Energy-efficient, robust design, regular maintenance required Replaced parts: New air & oil filters, separator, bearings, gaskets, belts, electrical components, intake & MPV valves Auction-ID: A7-47066-12

Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement.

Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement.

with many components was used to control a concrete batching plant

Condition unchecked Auction-ID: A7-47109-80

Professional industrial stud welding machine / studwelder. Suitable for stud welding up to diameter M16 Includes welding gun. Includes 2 sets of extension cables of approx. 20 m each. Power supply: 230/400 V – 3-phase Welding current: 100 – 1400 A Mobile version Machine weight approx. 190 kg Auction-ID: A3-43538-21463

This concerns an unused product, consisting of article number: 2991LS60, LS-60 Lock Set, quantity: 21, article number: 2991PS36, PS-36 3' Post Set-2 Posts and Mounting Hardware, quantity: 6, article number: 2991TB01, TB-01 TRIMMER Bracket set, quantity: 47 Auction-ID: A1-45624-194

Auction-ID: A1-46873-110

Auction-ID: A7-47109-13

Unused and orig. packaging Auction-ID: A7-47109-45

Hydraulically driven. Including 2x ballast concrete block dimensions per piece lxbxh approximately 16080x120cm Auction-ID: A1-41277-12

This concerns an unused product, consisting of article number: 415710N, Spring Disk M14, quantity: 59, article number: 95311800, Coupling, Tema, 1800 female 3/8\" 1800KAIW17MPN, quantity: 1, article number: 953116010, Coupling, Tema, 16010 hosetail 3/8\", quantity: 3, article number: 953116210, Coupling, Tema, 16210 male 1/4\", quantity: 10, article number: 953116220, Coupling, Tema, 16220 male 3/8\", quantity: 12, article number: 93250202622032, Air coupling KAG 54 1-1/4\" outer BSP, quantity: 12, article number: 95311600B, Coupling, Tema, 1600b female 3/8\", quantity: 33, article number: 95311600F, Coupling, Tema, 1600f female 1/2\", quantity: 11, article number: 95311600K10, Coupling, Tema, 1600 k10 with 3/8\" hosetail, quantity: 9, article number: EWVD10LRVS, Adjustable elbow 10L stainless steel, quantity: 7, article number: GES15LR12WDRVS, Coupling 15L-1/2 S.S., quantity: 2, article ...

Unused and in original packaging Auction-ID: A7-47109-41

Matching HSS and HM inserts and sleeves (D=18mm) for different diameters Auction-ID: A7-47109-24

Auction-ID: A1-46873-14

From Mitsubishi and Tungaloy, swivel holders from Kennametal and others (20 and 25mm, unused or slightly used) Auction-ID: A7-47109-103

Flow meter (DMH-1A20H11) 8.1 m³ C= 3.855 m3/h + valve + flange Auction-ID: A7-47109-62

WSP Suitable, Additional WSP Beam Auction-ID: A7-47109-105

This concerns an unused product, consisting of 32501028 pin 2.5mm x8, 32501032 pin 3.0mm x3, 32501040 pin 4.0mm x12, 32502302 belt fastener 4.0-4.8mm x5, 32502305 belt fastener 6.0-8.0mm x1, 325070050 belt fastener 5-6mm x4, 60204137057 weld-on point x195, 400020 nozzle holder 3/8 BSP x31, 402045 nozzle holder 3/8 BSP x3, 402235 nozzle holder ISO x74, 4663550050 platine x3, 40649W7 nozzle holder 5 ways x8, 6280473001C25 male connection 90° x90, 6270SJ7-015VP fertiliser nozzle green x53, 6270SJ7-08VP fertiliser nozzle white x15, 6270178601 plug 7-pole x23, 6270918986 flow meter insert x3, TJT906200 magnet ring x4, 2079777493 remote switch x1, 2079787192 fitting inlet x2, 2079787196 fitting inlet-outlet x14, 2079787210 hose adaptor 3/4 x4, 2079787211 adaptor 1/2 NPT x7, 2079787213 hose adaptor 1/2 90 x38, 2079790802 spray gun x6, SERFC65510 lance 50cm x115, 1109829 magnet 9.5x15 M3 x8, 11 ...