cold feed in used for sale

Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.

Key data: 16000 , 8825 , 140

Presse à injecter HAITIAN 1600 T type MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T

Binder KT 53 53L Cooling incubators - Temperature operation range: 4 °C to 100 °C - Volume: 53 liters are stackable - Internal dimensions (WxHxD): 400 x 400 x 334 mm - External dimensions (WxHxD): 660 x 635 x 630 mm Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

For sale here is a distributor injection pump from MAN / Bosch. It is for the MAN 12 cylinder diesel engine. MAN part number: 51.11103-7752. See nameplate. For more data, please refer to the pictures. The pump is as good as new. Ask for price if interested. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, with the exception  ...

Overview  This set of 2 inkjet coders was manufactured in 2021 by VIDEOJET. The machines were used for inkjet coding on glass bottles and were in service until September 2025 in a complete RGB line (330 ml). The units are currently stopped, still installed, with energy disconnected. They are available immediately and can be visited on request. Technical data  Capacity: 500 meters/min (up to 60,000 bph) Application: Inkjet coding for glass bottles Maintenance was carried out twice per year; the last maintenance took place in January 2025 Scope of Delivery  Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles

Key data: 3500 kN, 519 g/PS, 55 mm

1.0 pcs. Injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM350-2000CX Year of Make: 2008 Clamping force: 300 tons Spar spacing 710 x 7100 mm Screws DN: 55 mm Max. displacement: 570 cm³ Moulded part weight: 519 g/hp Control: MC5 Equipment: 2 pcs core train Robot Manufacturer: SEPRO 45-fold hot zone channel control Interface temperature control unit Approx. 67,530 operating hours

A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible.

Key data: 3800 , 1296 , 70

Presse à injecter HAITIAN 380T type MARS MA 3800 / 2950 Force de fermeture : 3 800 KN Année : 2012 Course d’ouverture moule : 700 mm Epaisseur moule min / max : 280/730 mm Distance entre colonnes : 730 x 730 mm Diamètre vis : 70 mm Volume théorique d'injection: 1 424 cm3 Poids de l’injection en PS : 1 296 gr Rapport L/D : 22,9 Pression d’injection max. : 2070 bars Capacité de plastification : 64,70 gr/sec Vitesse d’injection : 381 gr/sec Quantité d’huile dans réservoir : 690 litres Dimensions : 7,50 x 1,80 x 2,35 m Poids total : 17 T

Height=1.53 m, Overall length= 1.36 m, Overall width= 2.31 m, Net weight= 537 kg,

Total height 2.10 m incl. castors, lockable for max. big bag format: 90 x 90 x 180 cm Colour: white

Capacity per silo approx. 13.5 tons of flour with 100 kg scale VA Computer Dosimat MW Dimensions: 2,650 x 2,650 mm Height: approx. 4,200 mm complete with motor, control cabinet, etc. For Sale Price on request Phone +49 172 8345457

Key data: 468 kN, 2043 g/PS, 83 mm

- Top condition - Used for only one tool, no conversions - 2 Core moves - 8-way hot runner regulator - Nitrided high-strength screw -

Voumard CNC 130F Gang Style 3 Spindle CNC ID Grinder, 2009 – Mist Collector SPECS SHEET X-Axis Travels: 11.81″ Y-Axis Travels: 7.87″ Z-Axis Travels: 9.84″ Spindle Motor: 5.5 HP Max Grinding Wheel Diameter: 5.91″ Max Grinding Wheel Width: 0.59″ Grinding Spindle Speed: 12,000 RPM Grinding Wheel Dimensions: 5.91″ x 0.59″ x 1.97″ Center Height: 6.5″ Workpiece Length: 7.87″ Grinding Depth: 7.87″ Workhead Spindle Speed: 1,000 RPM Workhead Swivel Range: -30/+120°F Internal Grinding Spindle Speed: 42,000 RPM Electrical: 460V, 3-Phase Equipped With Fanuc 21i CNC Controller

Towards the middle of the year, two machines are available: Arburg 470H 1000 400 BJ 2010 Arburg 720S 3200 3200; Year of manufacture 2015 The operating hours can be found in the pictures attached, the condition of the 720 S is very good, it has only about 28,000 Bh The 470H is functional so far, but has a cable break/connection problem between the control cabinet and the AMK drive of the plate movement. Here comes sporadically an error message, which is only fixed by turning the drive motor. If you need more information, please get in touch.

Bosch (Eisai) AIM 596 inspection machine suitable for ampoules/vials with a diameter of up to 30.0 mm and a height of up to 130 mm, capacity up to 16,000 ampoules/vials per hour, machine net weight approx. 2700 kg with Seidenader DAR 350RL external washing and drying machine for ampoules/vials, etc., capacity up to up to 21,000 ampoules/vials per hour., machine net weight approx. 700 kg, includes format parts for ampoules 1 + 2 ml. (Ø10.75 mm), 3 ml. (Ø12.75 mm), 5 ml. (Ø14.75) and 10 ml. (Ø17.75 mm) and vials 20 ml

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.

Exhibition stand disassembled into metal case approx. 950x800x300 mm

\"SolarEdge SE4000H Inverter 1-phase: true Power: 4 Brand: SolarEdge Type: SE4000H \" Auction-ID: A7-46299-13

Input line L 6200mmxW385mmxH920mm; Output line L12200mmxB1280mmxH950mm; push-off unit L1450mmxB1800mmxH650mm Auction-ID: A1-43429-28

\"SolarEdge SE3500H Inverter Power: 3.5 Brand: SolarEdge Type: SE3500H 1-phase: true \" Auction-ID: A7-46299-5

\"SolarEdge SE4000H Inverter 1-phase: true Power: 4 Brand: SolarEdge Type: SE4000H \" Auction-ID: A7-46299-14

\"SolarEdge SE3680H Inverter 1-phase: true Type: SE3680H Power: 3.68 Brand: SolarEdge \" Auction-ID: A7-46299-6

\"SolarEdge SE4000H Inverter 1-phase: true Power: 4 Brand: SolarEdge Type: SE4000H \" Auction-ID: A7-46299-9

\"SolarEdge SE3500H Inverter Power: 3.5 Brand: SolarEdge Type: SE3500H 1-phase: true \" Auction-ID: A7-46299-3

\"SolarEdge SE4000H Inverter 1-phase: true Power: 4 Brand: SolarEdge Type: SE4000H \" Auction-ID: A7-46299-10

Auction-ID: A1-43429-101

Natural gas consumption: 6.75 m3 per hour. 21.5 kW switch-on. Equipped with 3 motors with drain. Includes control box. Drain pipes up to main pipe Auction-ID: A1-43429-11

Natural gas consumption: 6.75 m3 per hour. 21.5 kW switch-on. Equipped with 3 motors with drain. Includes control box. Drain pipes up to main pipe Auction-ID: A1-43429-12

\"SolarEdge SE3680H Inverter 1-phase: true Type: SE3680H Power: 3.68 Brand: SolarEdge \" Auction-ID: A7-46299-8

\"SolarEdge SE4000H Inverter 1-phase: true Power: 4 Brand: SolarEdge Type: SE4000H \" Auction-ID: A7-46299-11

\"SolarEdge SE3680H Inverter 1-phase: true Type: SE3680H Power: 3.68 Brand: SolarEdge \" Auction-ID: A7-46299-7

\"SolarEdge SE4000H Inverter 1-phase: true Power: 4 Brand: SolarEdge Type: SE4000H \" Auction-ID: A7-46299-12

Equipped with 7 drive rollers; control cabinet dimensions. 800x300x1400 mm Auction-ID: A1-43429-27

\"SolarEdge SE3000H Inverter Type: SE3000H Brand: SolarEdge Power: 3 1-phase: true \" Auction-ID: A7-46299-1

\"SolarEdge SE3500H Inverter Power: 3.5 Brand: SolarEdge Type: SE3500H 1-phase: true \" Auction-ID: A7-46299-4

\"SolarEdge SE5000H Inverter 1-phase: true Type: SE5000H Power: 5 Brand: SolarEdge \" Auction-ID: A7-46299-15

\"SolarEdge SE3500H Inverter Power: 3.5 Brand: SolarEdge Type: SE3500H 1-phase: true \" Auction-ID: A7-46299-2

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -

Industrial PC with 15.6" touch panel Equipment new, packed, in original box When buying more than three pieces of this product, a 25% discount

Electronic Scale, Fabr.Soehnle, Model 9055

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1

4x 20000 ANSI lumens, 1,400x1,050 SXGA+, 3-chip DLP; Video signal input: DVI, SDI; including 1x Christie CT Roadster 1.45-1.8:1 lens Auction-ID: A7-46311-4

1x Christie Roadster S+20K, 20000 ANSI lumens, 1,400x1,050 SXGA+, 3-chip DLP, video signal input: DVI, SDI; 3x Christie Roadster S+16K, 14000 ANSI lumens, 1,400x1,050 SXGA+, 3-chip DLP, video signal input: DVI, SDI including 1x Christie CT Roadster 1.45-1.8:1 Auction-ID: A7-46311-35

2x Christie Roadster S+20K, 20000 ANSI lumens, 1,400x1,050 SXGA+, 3-chip DLP, video signal input: DVI, SDI; 2x Christie Roadster S+16K, 14000 ANSI lumens, 1,400x1,050 SXGA+, 3-chip DLP, video signal input: DVI, SDI; including 1x Christie CT Roadster 1.45-1.8:1 lens Auction-ID: A7-46311-5

Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible.

An industrial vehicle that has been converted into a mobile filling station is available. Load capacity: 3000kg, max. front/rear axle load: 1930kg/2870kg, max. total weight: 4800kg, engine: Perkins diesel. An on-site inspection is possible.

Lippert alignment conveyor inclined roller conveyor 2050-650-530 RA2490 Make: lippert Year of manufacture: Roller width (RB): 530 mm Nominal/outer width (NB): 650 mm Length: 2050 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 2050 Nominal / outside width in mm: 650 Roll width in mm: 530 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simply get in  ...

This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details.

This 3-axis SHIBAURA EC230SXIII-8A was manufactured in 2020. It features a clamping force of 2250 kN and a mold opening stroke of 550 mm. The machine has a maximum distance between platens of 1230 mm and a screw diameter of 45 / 50 / 55 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC230SXIII-8A electrical injection moulding machine we have for sale. Contact us for further details.

Industrial hall with office space with an area of 1137 m2 constructed in 2013 is located in the Pomeranian Voivodeship between Słupsk and Lębork. Its excellent location in a special industrial zone close to the S6 expressway provides good transport links of the warehouse to the larger cities of Pomerania, i.e.: – Lębork: 21.4 km, – Słupsk: 34.1 km, – Bytów: 49.2 km, – Wejherowo: 56.9 km, – Gdynia: 78.6 km. The plot on which the industrial hall is located has a total area of 10900 m2 and is divided into: – office and production hall building (1137 m2), – space around the building paved with paving stones (820 m2), – the remaining part of the plot developed into green areas (approx. 8900 m2). The industrial hall building is divided into two parts: an office and social space of 397 m2 and a production space of 740 m2. The office space is finished on a turn ...