coil winding used for sale

Features Volume 53800 L Material No. V2A Operating pressure 2 bar Working temperature 20 C Total height 10870 mm Diameter 3260 mm

Stock 3 pieces Carisma cvp and cm Fly fan coils Auction-ID: A7-49228-14

CONTROLS    SIEMENS S5 DECOILER   sheet width max.: 370 mm   sheet width (min): 80 mm LEVELLER UNIT   sheet thickness max.: 2.5 mm   sheet thickness min.: 1 mm ELECTRICAL SPECIFICATIONS   mains frequency: 50 Hz

Tank height 155cm 3 top inlets (middle inlet to the coil) 2 bottom inlets Thermometer with probe Auction-ID: A7-49327-98

Tank height 155cm 3 top inlets (middle inlet to the coil) 2 bottom inlets Thermometer with probe Auction-ID: A7-49327-33

Features: Volume 3150 L Material No. V2A Max. operating overpressure 0.99 bar Total height 3000 mm Diameter 1300 mm Outer diameter 1400 mm Surface inside 2B=IIIC ground Surface outside 2B=IIIC ground Working temperature 20 C Cylinder length 2000 mm Description: Topsoil: Clapper bottom Threaded nozzle DN40 central Threaded nozzle DN40 side Check valve Cylinder: Manhole 440 x 340 oval Sample tap DN15 Ladder hooks Downward-swept CIP line DN40 with disc valve and pressure gauge Threaded welding nozzle DN25 with disc valve Cooling coil with inlet and outlet 3/4" Blind Cover Flange Neck DN125 Underbody: Clapper bottom/ curved back forward-drawn residual drain pipe with disc valve DN50 flush with the tank wall 3 profile feet with calottes - height adjustable

contactor TeSys LC1D 3P AC3 440V 18 A coil 230 V AC Schneider Electric LC1D 3P Series Contactor, 3 Pole, 7.5 KW, 3 NO, 18 A 230V AC Motor Control, Resistive Load, Auction-ID: A1-49412-148

contactor TeSys LC1D 3P AC3 440V 18 A coil 230 V AC Schneider Electric LC1D 3P Series Contactor, 3 Pole, 7.5 KW, 3 NO, 18 A 230V AC Motor Control, Resistive Load, Auction-ID: A1-49412-147

contactor TeSys LC1D 3P AC3 440V 18 A coil 230 V AC Schneider Electric LC1D 3P Series Contactor, 3 Pole, 7.5 KW, 3 NO, 18 A 230V AC Motor Control, Resistive Load, Auction-ID: A1-49412-149

contactor TeSys LC1D 3P AC3 440V 18 A coil 230 V AC Schneider Electric LC1D 3P Series Contactor, 3 Pole, 7.5 KW, 3 NO, 18 A 230V AC Motor Control, Resistive Load, Auction-ID: A1-49412-150

contactor TeSys LC1D 3P AC3 440V 18 A coil 230 V AC Schneider Electric LC1D 3P Series Contactor, 3 Pole, 7.5 KW, 3 NO, 18 A 230V AC Motor Control, Resistive Load, Auction-ID: A1-49412-151

CONTROLS   electronic controls OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 200 mm   sheet thickness max.: 4.5 mm   coil weight max.: 0.5 to DECOILER   coil weight max.: 0.5 to   mandrel expansion range from: 250 mm   mandrel expansion range up to: 550 mm LEVELLER UNIT   sheet width max.: 300 mm   sheet width (min): 20 mm   sheet thickness max.: 4 mm   sheet thickness min.: 0.5 mm   material cross section max. (450 N/mm2): 800 mm²   number of leveller rolls: 7   diameter of leveller rolls: 65 mm   number of infeed-/outfeed rolls: 4   diameter of feed rolls: 65 mm   drive power: 1.5 kW   loop controls: yes ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz

With plate 1830mm long Auction-ID: A1-41950-121

Krone SD 3-axle curtainsider semi-trailer, equipped with curtainsiders, rear doors and coil gutter. The trailer is equipped with SAF axles and air suspension. Suitable for general transport and thanks to the coil tray it can also be used for the transport of coils. According to the seller's statement, the brakes work and the trailer can be taken along the public road when collecting. Dutch registration documents are available - Chassis number/VIN: WKESD000000465233, 3-axle, SAF axles, Air suspension, Curtainsider, Rear doors, Coil gutter, Length according to type plate: 13,860 mm, Width: 2,550 mm, GVW 39,000 kg, Mass ready to drive: 7,800 kg, Theoretical payload approx. 31,200 kg, Condition / known defects: The semi-trailer is in used condition with clear signs of wear and age. There is damage to a sleeper, a stanchion and the roof tarpaulin/roof construction, as visible in the photos. T ...

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic