coating pan used for sale

width of the strips: 75 mm band length: 2000 mm band speed: 33 m/s weight of the machine ca.: 90 kg Power: 3 KW 400V / 50Hz Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 75 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 90 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 570 mm Motor output: 2,2 kW Table dimensions: 810 x 590 mm table height: 905 mm voltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mm Weight: 275 kg Dust suction hood: 2 x 100 mm band speed: 1550 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand baby diaper production line Mfc.: Maqmantas Type: Pannolini – 50 IMD Built: 2015 Size of diapers: Mini, Midi, Maxi, Junior Nominal Production: 50 pieces/min. Dimensions: 4800 x 950 x 2050 (L x W x H) mm (without exhauster) Room dimensions: 21 x 5.3 x 3.1 m – L x W x H Voltage: 3 ~ 220 V, 3 ph., 60Hz, 100 A Power: 12 kW Theoretical Weight: 1500 kg Screw compressor: 7, 5 bar The machine can be demonstrated in running conditions.

Panaroma Model: AT400 Pasta stacking and cutting machine Serial: 1229 2002, Stainless stacking and cutting machine, 400mm width, designed to roll, to dust, to cut and to overcome the pasta sheet layers, suitable for lasagne or tagliatelle. Output up to 100Kg / hour, variable speed, with timer, 3ph, mobile

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 700 mm Cutting height: 420 mm cutting width: 680 mm Motor output: 3 kW Table dimensions: 695 x 990 mm Table tiltable: 45 Grad Dimensions (L/W/H): 1260x840x2270 mm machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 410 mm Length of the planing table: 2850 mm Number of knives: 4 (Tersa) St. Motor output: 5,5 kW loading dimensions L x W x H: 2950 x 1260 mm weight: 870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used autoclave PANZER 340 liters with superheated steam -refurbished- - Control, cover seal, safety valve, pressure gauge, etc. all new. - For sterilizing, preserving, pasteurizing, cooking, curing, and aging. - Autoclave compl. made of high-quality stainless steels, lid with quick-release fastener. - The autoclave is equipped with all safety equipment. - The autoclave was manufactured in accordance with the latest requirements of the current pressure vessel regulation. - All safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain valve, safety outlet valve, etc. are of course installed. - The autoclave is subjected to a construction and pressure test by the TÜV. Corresponding certificates are included in the scope of delivery. - Fully automatic control by F-value controller including operating temperature, core temperature, F-value contr ...

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 33 m/sec engine output: 3 kW Motor speed: 2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED PANDA WV 1000 C 0EC ZZTZ BUSCH VACUUM PUMP

PANASONIC TL-1800 GIII welding robot was built in 2021 in Japan by Panasonic Smart Factory Solutions Co., Ltd. The machine, distinguished by its high reliability and ease of operation, is an excellent choice for precision welding of workpieces using the TIG method. Its slim design, combined with the large range of arm movement, allows free operation in all positions, even in hard-to-reach places. The TL 1800 robot arm is offered together with equipment, which includes a controller, a portable control unit and a TIG welder. The total weight of the machine is 215 kg. Technical specifications of the PANASONIC TL-1800 GIII robot - number of axes: 6 - maximum payload: 8 kg - maximum arm reach: 1801.8 mm - robot axis movement range axis 1 (rotating trunk): ± 170° axis 2 (upper arm): -90° / +165° axis 3 (forearm): -80° / +210° axis 4 (rotating wrist): ± 270° axis 5 (bending  ...

The Pannkoke 7011 CeDe is a vacuum lifting system for glass and similar materials. It is designed for the safe and flexible internal transport of heavy sheets. Below you will find the key specifications. ⚙️Main technical data Type: Vacuum lifter Year of construction : 2001 Serial number : 2001/ 2184 01 Vacuum circuit: o 1-circuit system with vacuum tank, check valve, vacuum switch and vacuum gauge o Closed circuit prevents vacuum loss in the event of a power failure o Acoustic signal when there is insufficient vacuum o Vacuum generation: o Built-in low-maintenance vacuum pump (dry running) Battery-powered, with quick-change system (battery change < 1 minute) o Charger for second battery (110–230 V, 50/60 Hz, 1 phase) o Operation: o On/off directly on the device o Suction/release via remote control o Suspension: 2-fold crane suspension, rotatab ...

Berief Bratt pan Serial: 7228 Stainless, 130l bratt pan, thermo oil, up to 260'C, manual wheel to discharge, with digital controls and timer, 3Ph

Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph

Panasonic NE1880 Microwave Stainless Panasonic pro II microwave, programmable controls, clear digital display, 16 programmes, capacity 44l, 1800W, 1Ph (11 in stock)

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Offer Heinzmann Pandaros for sale.

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Vacuum lifter, vacuum lifting device, vacuum suction device, plate lifting device, vacuum lifting frame, suction plate, suction device -Manufacturer: Pannkoke, vacuum cleaner No. 388 -Diameter: 290 mm -Number: 1 piece -Dimension: Ø 290 x 50 mm -Weight: 1.6 kg

Record Panda1000 flow wrapper Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph

Bread roll line Dough sheet line for angular and elongated products Dough feeding belt Pre-portioner Head machine incl. div cutting rollers with baguette long-knitting station - Incl. 2 knitting drums (1-r long + 2-r short) with stump station - incl. 2 diamond stumblers / + // or average Humidification and sprinkling station Year of construction: 2017 - With intermediate belt and lattice belt immersion bath - simple sprinkling station with 2 seed containers (coarse/fine) Deduction - 4x60/40 or 2x60/80 planks or sheets Disassembled, not overhauled or cleaned from the Rottenburg warehouse immediately available in bakery condition

Firex Boiling pan Stainless, 150l boiling pan, adjustable temp controls, auto refill, side bottom discharge, 3Ph

Gear motor electric motor -Speed: 21 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 390/270/H210 mm -Weight: 17 kg

cable tie fastening, cable tie holder, multiple fastening strip -Manufacturer: Panduit, cable tie fastening cable tie holder -Type: MTP series -Number: 167 holders available -Price: per piece, minimum order 20 pieces -Dimensions each: 130/16/H5 mm -Weight: 0.005 kg/piece

cable tie fastening, cable tie holder, multiple fastening strip -Manufacturer: Panduit, cable tie fastening cable tie holder -Type: MTP series -Number: 82 holders available -Price: per piece, minimum order 20 pieces -Dimensions each: 91/16/H5 mm -Weight: 0.005 kg/piece

housing screw connection, screw-in screw connection -Cable gland: 2 pieces -Type: LMZ 27.9-127-G1 -Price/Delivery: complete -Dimensions box: 115/110/H65 mm -Weight: 0.2 kg/piece

Telecommunications system, telephone system -up to 20 extensions -Especially suitable for small offices

Constant, oscilloscope -220 V 40-60 Hz -Dimensions: 245/270/H185 mm -Weight: 8 kg

Plate Processing Machine Manufacturer: Hundegger Type: SPM-2 Speed Panel Year of Make: 2011 CNC control SPM-2 for panel format 3,200 x 2,600 mm Milling unit 6 kW Max. speed: 23,500 rpm Milling tools Outer diameter max.: 100 mm Cutting length of milling tools max.: 60 mm Z-axis: positioned + moved by spindle units 5-axis milling unit 6 kW Milling spindle motor: 6 kW frequency-controlled Max. speed: 23,500 rpm Milling unit can be rotated 360° in the Z-axis Inclination up to 46° to the Z-axis Milling tools outer diameter max.: 20 mm Cutting length of milling tools max.: 60 mm Z-axis: moved + positioned by spindle units Ink-jet labeling head Max. font height: 50.8 mm Colour prints possible Z-axis pneumatically operated, Head can be automatically swivelled by 180° Automatic stacking system Electronically controlled lift table Stroke max.: 1,000 mm Max.  ...

Key data: 2 KW, 40 mm

gebr. Spigot cutting and slitting machine with lifting spindle PANHANS TYPE 261H YOC 1993 Manual / automatic operation Lifting spindle autom. Changing the splintered wood Longitudinal stop LAS (HOFFMANN) Pneumatic workpiece clamping Sliding carriage length: 2.50 m Shortcut saw: Motor power: 2.5 kW Max. saw blade diameter: 400 mm max. cutting height: 130 mm Lateral adjustment: max. 100 mm Suction nozzle: 80 mm Milling machine: Motor power: 7.5 kW Milling mandrel: 40 mm Max. tool diameter: 350 mm Suction nozzle: 200 mm Largest tenon length: 140 mm Clamping height: 235 mm Lifting height: 120 mm Rolling table height adjustment: 80 mm Engine brake All pneumatic hoses renewed Weight: approx. 680 kg Manufacturer information

Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Type of refrigerant: R410a Number of fans: 1 pc. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg Condition: Excellent

Automatic Transfer Switch - ATS Panel - ATI Panel, 2.000 Ampere - Applicable for generators up to 1.380 kVA; Gross weight [kg]: 330

Automatic Transfer Switch - ATS Panel - ATI Panel, 2.500 Ampere - Applicable for generators up to 1.730 kVA; Gross weight [kg]: 311

Automatic Transfer Switch - ATS Panel - ATI Panel, 250 Ampere - Applicable for generators up to 175 kVA; Gross weight [kg]: 75

Automatic Transfer Switch - ATS Panel - ATI Panel, 400 Ampere - Applicable for generators up to 275 kVA; Gross weight [kg]: 85

Automatic Transfer Switch - ATS Panel - ATI Panel, 45 Ampere - Applicable for generators up to 25 kVA; Gross weight [kg]: 35

Automatic Transfer Switch - ATS Panel - ATI Panel, 1250 Ampere - Applicable for generators up to 435 kVA; Gross weight [kg]: 90

Automatic Transfer Switch - ATS Panel - ATI Panel, 70 Ampere - Applicable for generators up to 50 kVA; Gross weight [kg]: 35