coating line used for sale

Key data: 1040 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axis Package Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in  ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal450 mmCross580 mmVertical460 mmTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools30 Rigid tableRigid table, clamping area 460 x 600 mm / 18,11 x 23,62 inch Loading weight max. 600 kg / 1322 lbs Spindle speed up to 40,000rpm with Shaft CoolingSpindle speed 20 up to 40,000 rpm within shaft cooling for tool taper HSK-E50 DIN 69893 AC-Main drive with 19,5/15 kW (100/40%DC) 14, ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs Spindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Mach ...

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 630 x 630 mmCentre bore 50 mmMaximum load (table centre) 900 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreePackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)  ...

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KW Special equipment-Chip convoyer with discharge height 1200 mm Special equipmentRMS-Sensor Special equipment-Self-regulating double-cone guide bushing -600 l cooling system. 8 and 20 bar pump, paper belt filter - IEMCA Boss 545/32 e automatic bar feeder, max. length 3200 mm.

BAZ DMG Deckel V75linear (ca.16000 spindle hours) BJ 2005

ROSA LINEA IRON 08.6 N ist eine CNC Flachschleifmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 800×400 mm; Hub X 950 mm, Z 550 mm; Schleiflänge 850 mm, Breite 630 mm; Traglast 1000 kg; Schleifscheibe Ø400×80 mm, Bohrung 127 mm. Drehzahl Scheibe 1500 t/min; Tischgeschwindigkeit 1–38 m/min; automatischer Quervorschub stufenlos 1–8 m/min; Anschluss 3×400 V 50 Hz; Gewicht ~6000 kg; Abmessungen 3600×2200×2300 mm. Erreicht enge Toleranzen, geeignet für Automotive, Werkzeugbau, Luftfahrt, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

Schmedt hardcover book production line - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Schmedt hardcover book production line Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Schmedt hardcover book production line Price: 95000 EUR Download PDF Schmedt hardcover book production line The machines are in very good condition and have seen little use. The set consists of the following machines: – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziC ...

This 3-axis DMG DECKEL MAHO DMU 105 V Linear was manufactured in 2004. It features a robust CNC control system, HEIDENHAIN iTNC 530, and has a machine weight of approximately 12,200 kg. The required installation space is 5,700 × 4,700 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 105 V Linear vertical machining centre we have for sale. Contact us for further details.

Key data: 640 mm, 600 mm, 500 mm

Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions

CNC lathe GILDEMEISTER CTX 420 linear With control Heidenhain ELTROPILOT 4290 Year of Make: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed revolver Various tool holders VDI 40 Tailstock with quill Chip conveyor Hydraulic jaw chuck SMW Autoblok 0 250 mm Foot switch for jaw chuck + tailstock adjustment Oil mist extraction Coolant Setup Operating Instructions

Key data: 640 mm, 640 mm, 640 mm

Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530

Key data: 500 mm, 1000 mm, 2500 1/min

Control: Name: Siemens 840 D Travels: x-travel: 382 mm // z-travel: 1080 mm Technical data: • Speed range 20-2500 rpm • Turning diameter 500/600 mm • Turning length 1000 mm • Spindle bore 136 mm • Rod diameter 121 mm • Torque 2200 Nm • Automatic hydraulic bezel • 12-fold tool turret

General SKU331Y747 LocationBarneveld CEcheck MakeDe Dietrich Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket30 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor0.75 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity100 l Vessel sizesDia. 700x500 mm Dished bottomcheck ManholeCover Top connectionscheck OutletDN80 with valve With jacketcheck Max. temperature-25°C/+200°C With propellor stirrercheck Motor0,75 kW (400 V, 1410 rpm, (Ex)) Speed mixing shaft185 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General TypeAE100 No.68438 Year of construction2007 Mounted on legscheck With switchgearcheck Floorspace0,90 x 0,90 m Total height2,60 m Weight550 kgOther chemicalBiotechnologyGlass-lined ReactorsOther pharmaceuticsCosmeticsSolid pharmaceuticsBiopharmaceuticalAP ...

General SKU331Y748 LocationBarneveld CEcheck MakeDe Dietrich Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialGlass Volume400 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity400 l (444 l) Vessel sizesø 780 x 1000 mm Dished bottomcheck ManholeCover Top connectionscheck OutletDN 100 with valve With jacketvolume 120 l Max. temperature-25°C/ +170°C, jacket +200°C With propellor stirrercheck Motor1,5 kW (380 V, 1400 rpm (Ex)) Speed mixing shaft140 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009U) General TypeAE 400L No.67346 Year of construction2006 With switchgearcheck Floorspace1,00 x 1,00 m Total height2,30 m Weight1120 kg Extra information Mechanical seal fluid tank Other chemicalBiotechnologyGlass-lined ReactorsOther pharmaceuticsCosmeticsSolid ...

General SKU331Y749 LocationBarneveld MakeDe Dietrich TypeAE630IMF2 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket35 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume630 Ltr. Motor2.6 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity684 l Vessel sizesø 1200 x 900 mm Dished bottomcheck ManholeDN300 Top connectionscheck OutletDN100 with valve Max. temperature—25 / 160 °C With propellor stirrercheck Motor2,60 kW (400 V, 1800 rpm, (Ex)) Speed mixing shaft300 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General No.69871 Year of construction2009 With switchgearcheck Floorspace1,70 x 1,70 m Total height3,20 m Weight1800 Extra information With Bartec control, type Polaris,  Mechanical seal fluid tank,  Other chemicalBiotechnologyGlass-lined ReactorsOther pharmaceuticsCosm ...

General SKU473Y429 MakeHosokawa Micron B.V. Serial4606801/0200 TypeMicron Dryer MDV-5 (flash dryer / mill) + screw feeder DHA-200 Material Product contact materialStainless steel Cover materialStainless steel Rotor materialMild steel Extra information Temperature140 °C Weight5500 kilogram Rotor speed400 rpm Specified Features - Miscellaneous Mill Grindergrinding rotor with classifier in one body Motor55 kW Speed400 rpm Miscellaneous Mills MaterialMild steel, Stainless steel General Year of construction1995 Mounted on framecheck LocationBarneveld Weight5500 kg Extra information This Hosokawa Micron MDV-5 flash dryer combines drying, grinding and classifying in a single body: a vertically driven grinding rotor with an integrated classifier, housed in a dryer body with a wet material feeder inlet, a hot air/gas inlet and a product/air outlet at the top. Agrochemic ...

Used bottling line for packaging oil / olive oil made by Robak. New 2018. The line is currently configured for 250-ml and 500-ml Marasca glass bottles. The filling and capping machines are set up for these capacities. The manufacturer also offers the option to fill round and plastic bottles of various capacities with this setup. It has primarily operated with 500 ml bottles, resulting in a production rate of: 1,000–1,200 bottles per hour. Total number of bottles produced: approximately 486,000. The line began operation in 2020. The line consists of the following components: 1. ANM-08 automatic bottle filler - 10 filling heads with Coriolis mass flow meters - Capacity: up to 1,500 bottles/hour 2. ZR-02 single-head automatic capping machine and MPZ-01 mechanical cap feeder - Capping machine equipped with a head for 31.5x24 aluminum caps - Capping machine capacity: u ...

COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. The compact tabletop machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed via a pair of feed rollers and then granulated by a fixed counter knife and a rotating impact knife. The feeding and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter blade is precisely adjustable. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of Make: 2009 Machine number: 9310 31 09 Connected load: 0.5 kW Electrical connection: 230 V / 50 Hz Nominal current according to nameplate: 6 A Dimensions: approx. 290 x 500 x 540 mm Weight: approx. ...

Key data: 2200 mm, 1500 mm, 1000 mm

Description, subject to prior sale. CNC 5-axis gantry milling machine with high dynamics Manufacturer: Parpas Type: Diamond linear Year of manufacture: 2013, Acceptance: 2014 Control: Heidenhain iTNC530 X (longitudinal travel): 2200 mm (+330) Y (transverse travel): 1500 mm (+330) Z (vertical travel): 1000 mm Distance between uprights: 2700 mm Max. distance between table surface and spindle tip with mounted milling head 1220 mm Linear axis feed speed: X and Y axis 0-60 m/min Z-axis 0-40 m/min Table surface: 2300 x 1600 mm Max. weight with optimal distribution: 6000 Kg/m2 T-slots 22 mm, distance between T-slots 200 mm. 5-axis orthogonal milling head with electrospindle Max. spindle speed 20,000 min-1 Spindle cone HSK 63 A A-axis ±105° (torque 830 Nm), C-axis ± 370° (torque 1200 Nm) 42 Stations Tool Changer Tool holder HSK 63A-100 Max. tool∅ 80mm  ...

What's included: Infeed and shredding • Genox CBS13080 metal infeed conveyor – heavy steel-slat belt for feeding bales or loose film into the pre-shredder • Genox YS1300 pre-shredder – single-shaft, hydraulic ram fed, 75 kW main drive. Opens bales and cuts film down before washing • Genox CBR6090L conveyor belt – 4 kW twin-angle belt conveyor Pre-washing • Genox GRD6025 pre-washer – 45 kW / 60 HP, 415 V / 50 Hz, built 2018, serial S19UL04, CE marked. Strips sand, grit and soil from the film before it reaches the granulators Size reduction • Genox GXC1200N film granulator – GXC1200 series heavy-duty granulator, 1,200 mm wide × 520 mm diameter rotor, outboard bearings, hydraulic-assisted chamber and screen opening • Genox V800 single-shaft shredder/granulator – 400 mm × 800 mm rotor, 35 reversible 40 mm cutters, hydraulic ram feed, 40 mm screen, app ...

Slitting amp; cut to length line 1 - Double head decoiler (hydr): gt; 20 ton capacity gt; with coil supply cart amp; lift min coil width: 500 mm both units are movable 2 - Pulling unit 3 - Shear for making the first clean cut 4 - Pre-leveller Ungerer 4 + 5 rolls hydraulically adjustable 5 - Slitting unit with 4 cuts 6 - Supply system for shear 7 - Shear for cut to length 8 - Conveyor table 9 - Broncx fine leveller 10 - Stacking unit gt; featured a mechanical back gauge; once plate make contact then the shear makes the cut max length of cut: 7 meters Total length of the installed line: 50 meters Material thickness x width: 2200 x 4 mm DECOILER(s): 20 ton

measuring range X-axis: 0 - 200 mm measuring range Z-axis: 0 - 300 mm tool adaptor: SK 40 / BT 40 Resolution: 0,01 mm repeating accuracy: 0,01 mm Ambinent temperature: 0 - 40 °C dimensions of the machine ca.: 0,30 x 0,19 x 0,64 m weight: 44 kg Tool Presetter KELCH - set line V123 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rollforming line for simple angle profile Equipment consists of: 1 gt; decoiler 2 gt; roll forming line with 6 stands 3 gt; cutting unit

3-axle refrigerated semi-trailer Make: KRONE, Type: SD COOL LINER SDR27 EL4-DS, Year of manufacture: 2022, Serial number: WKESD000001055194, Registration number: 10/2022, Vehicle identification number: WKESD000001055194, permissible Total weight 39,000 kg, Double deck version, Clear interior length 13,310 mm, Clear interior width 2,460 mm, Clear interior height 2,630 mm, Refrigeration system CARRIER VECTOR 1550

3-axle refrigerated semi-trailer Make: KRONE, Type: SD COOL LINER SDR27 EL4-DS, Year of manufacture: 2022, Serial number: WKESD000001055193, Registration: 11/2022, Vehicle identification number: WKESD000001055193, permissible Total weight 39,000 kg, Double deck version, Clear interior length 13,310 mm, Clear interior width 2,460 mm, Clear interior height 2,630 mm, Refrigeration system CARRIER VECTOR 1550

3D -Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U -shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash -off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Availability: Immediately Control unit: Siemens Sinumerik 840D Dimensions: L 10000 x W 2450 x H 3000 mm Motor power: 35 kW Number of axes: 4 axes Spindle speed: 6300 rpm Spindle taper: ISO 40 Table length: 2600 mm Table load: 2200 kg Table width: 600 mm Tool magazine: 100 positions Weight: 14000 kg Working hours: 8451 H X-Axis travel: 2200 mm Y-Axis travel: 540 mm Z-Axis travel: 720 mm We hereby offer this used Deckel Maho DMF 220 Linear vertical machining center from 2005, located in Romania. This high-performance vertical machining center is equipped with a Siemens Sinumerik 840D control unit, offering advanced programming and precise control for complex machining operations. It features a large working area of 2600 x 600 mm, providing flexibility for machining long and medium-sized components. Powered by a robust 35 kW motor and a spindle capable of reaching 6300 rpm, the DMF 220 Lin ...

Hardcover Line Zechini / Sumbel / Schmedt Type: semi-automatic hardcover line Equipped with: Sumbel Herold Zechini Ottima 74 roller press Schmedt Präkant 6201 turning-in machine Zechini Ottima 74 – Roller Press Year: 2000 Size: 74 cm Application: pressing together paper, cardboard, material, leather, plastic, corrugated carton, etc. Max. material thickness: 3,5 mm Dimensions: 96 x 85 x 105 (h) cm Net weight: 119 kg Schmedt Präkant 6201 – Turning-in Machine Max. size: 600 x 600 mm Min. size: 150 x 150 mm Board thickness: max. 6 mm, min. 1,5 mm Condition: good, cleaned and checked

General SKU304W587 LocationBarneveld MakeTechnoglass TypeAE160 Pressure Working pressure6 Bar Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume160 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity216 l, (160 l) Vessel sizesDia. 800x600 mm ManholeDN 700 Top connectionscheck Outlet(top discharge by vacuum/ pressure) With jacketcheck Max. temperature200°C With propellor stirrercheck Motor1,5 kW, (400 V, 1460 rpm (Ex)) Speed mixing shaft36 - 178 rpm With jacketcheck Glass Reactors MaterialGlass General No.8289 Year of construction1999 Mounted on legscheck Floorspace0,80 x 0,80 m Total height2,60 m Weight650 kg ATEX designedcheck Extra information - No bottom outlet for product. Product has to be discharged by vacuum or pressure - baffle with temperature probe installed Volume 63 l,  ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis) Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63 CabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRo ...

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Qty. 1 Second-hand full automatic mat and shine anodising coating line Mfc.: CISART Built: 2013 Stopped: Capacity: 1,800,000 pieces of profiles per annum Maximum Part Length: 3 m Requested area: approx. 630 m² Operators: 4 - 6 Estimated Full Power Consumption: 960 kW +/- 10% Voltage: 415 V, 50 Hz, 3 ph. Heat Consumption Max.: 500,000 Kcal/H +/- 10 % Water Consumption: 3 m³/h Water Consumption (TAP) by Customer: 10 m³/h Air Consumption: 1 m³/h Heating System: Electricity & Gas Acid Recovery System: 3 kg/h CHILLER 400,000 + 160,000 kCal/hr 40 °C Max. Ext. Temp. Water cooling range: 9-14 °C 190 + 80 kW Dozing System Quantity: 8 Eye & Body Wash Quantity: 2 Qty. 49 Tanks, 3.5 x 1.1 x 3.0 m – L x W x H Weight: 10 ton each Tank made of 2,5 mm thick AISI304 sheets

Qty. 1 Second-hand Electrostatic Multi Colour Powder Coating Production Line Mfc.: Gema Type: OptiFlex A2-14 Guns Built: 2013 OptiFlex A2 adjusts the air settings electronically by means of patented DVC System and monitors the production parameters continuously, resulting in a high quality coating Result. Work piece data – Aluminium Profiles Dimensions: 1800 x 400 x 6000 mm – H x W x L Conveyor speed: 2.0 m/min. One new Booth No. 2 (Mobile on rails) Magic Plus Booth” with cyclone recovery installed 2013, consisting of: Gema Electrostatic Powder Coating Equipment type OptiFlex A2 – 14 Guns With OptiFlex AS05 and OptiStar CG06 Gema Reciprocator System type ZA05-23 with carriage type XT10 for remote width positioning and outside cleaning Gema Control System type CM-30 Magic control including height recognition system Gema Quick Color change system Magic Plus with mu ...

Manufacturer: Bürkle, Type: Betonpflasterlackieranlage, Year: 2007, Finished product: Oberflächenbeschichtung, Work piece width min-max mm: 1300, Destacking plant: Vakuum, Inlet conveyor: mit Ausrichstation, 1 UV dryer lamps/Watt: yes, Conveyor belt/roller: Band, 2 paint roller: Bürkle SLC 1300, 2 UV dryer lamps/Watt: yes, wast cleaning: yes, Conveyour system: Band, Stacking plant: yes, Year :2007

Manufacturer: Sorbini / Tagliabue, Type: Walzstrasse, Year: 1998, Work piece width min-max mm: 1.300, Min.-max. workpiece height in mm: 3 - 80 , Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 6 - 24, Inlet conveyor: yes, Lackwalze 1: T/20-MF, UV Trockner 1: 1 Lampe, Lackwalze 2: T-20-MF, UV TRockner2: 3 Lampen, Lackwalze 3: T-20MF, UV Trockner 3: 3 Lampen, Paint sander: TAG 13KS DPSTRA, Paint rollers: 3, Year :1998

Manufacturer: Superfici, Type: Lackierstrasse, Year: 1999, Control: Superfici Elmag, Work piece width min-max mm: 10-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150, Feeding speed min-max m/min: 5-20, Control: Superfici Elmag, Lackwalze 1: Putty Filler Valorta VAL S 3, UV Trockner 1: 1 Lamp UV Dryer TU 166, Lackwalze 2: Double Roller coater Valorta FV/PF3 2T, UV TRockner2: 2 lamp UV TU 165, Year :1999

Manufacturer: Bürkle, Type: RCLS 700, Year: 2014, Finished product: Betonplatten, Work piece width min-max mm: 700, Min.-max. workpiece height in mm: 3 - 80, Min.-max. workpiece length in mm: 400, Feeding speed min-max m/min: 2 - 10, Control: Bürkle, Inlet conveyor: no, IR-Trockner 1: 20 x 3 kW, Transport 1: Band/Stange, Lackwalze 3: RCLS 700, UV Trockner Lampen/Watt: 120, UV Trockner Lampen/Watt: 120, Paint rollers overall: 2, UV Trockner gesamt: 2, IR-Trocker gesamt: 1, UV Trockner gesamt: 2, UV dryer: Easy Cure UV 700, Conveyor belts: 0, FREE TEXT: einschl. Dosierwalzenheizung, Year :2014

Deighton forming machine, Type: Formatic R2200 / 180, Serial number: R2200/22/10/368, Capacity: max 4400 products per hour, Hopper: 20 litres, Belt width: 120 mm, Power: 230VAC, 1Ph, 50Hz, 0.75kW, Dimensions: 1150 x 900 x 1500 mm, Weight: 95 kg, Deighton flattening conveyor, Type: FL, Serial number: FL 16/04/036, Belt width: 175 mm, Power: 230VAC, 1Ph, 50Hz, 0.18kW, Dimensions:1450 x 650 x 1200mm, Weight: 48 kg, Deighton preduster, Type: 200W Econodust M/C, Serial number: ED 22/09/068, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.51kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton battering machine, Type: 200W weir Econorobe M/C, Serial number: WER 22/09/067, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.88kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton mixer, Type: Batter mixer, Serial number: M 22/10/073, Mixer: 200 litres, Power: 230VAC, 1Ph, 50Hz, 1.5kW, Di ...

A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/ ...

Automatic powder coating line was built in 2018. After a test launch, it has never been used. The powder coating line is designed for the automatic powder coating of metal components with a maximum length of 1500 mm and a width of 380 mm. It enables the performance of the entire technological process, from surface preparation, through the application of powder coating, to the final curing of the coating. The preparation of workpieces for coating takes place in a three-zone chemical section with immersion tanks. There, the elements are cleaned prior to the application of the coating. The process uses demineralised water, which ensures proper surface preparation and enhances coating adhesion and durability. Transportation of parts between successive stages is performed using a Power Free overhead conveyor system with height adjustment. Powder coating takes place in KC-08 spray boo ...

Description Item #8985 - FLAVOUR COATING AND SEASONING LINE FOR EXTRUDED SNACKFOOD / BREAKFAST CEREAL PRODUCTS Manufactured by SCHAAF All from Year 2018. Line includes : TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm. TYPE 282 DRUM DRIER/ROASTER 1600 PTFE, Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures ...

Feeder Mailandet 466 coater LTG oven Incenerator Double stacker Full electric upgrade in 2024 Max sheet format: 1145x960 Up to 5,500 sheets per hour

Complete coating line including: Feeder Mailander 460 coater, year 1981 GAS oven 30m, year 2000 Double stacker Bundle turner Max sheet format 1145x980 Upgraded with pneumatic system for feeding

GIARDINA GROUP automatic powder coating line was built in 2018 in Italy by Giardina Finishing S.r.l. The line is characterised by a low level of wear, with a total operating time of approximately 6 months. During this period, it was used for coating panels intended for sectional doors. The GIARDINA GROUP powder coating line was designed for the comprehensive powder coating of flat metal components with maximum dimensions of 6000 x 1300 mm. The entire process is performed continuously, without the need for manual handling of the components. Transportation of parts between the individual stages is performed using a conveyor system. The system consists of: – BR-6000 loading roller conveyor – Dualtech 416 SB Dry automatic spraying machine – electronic control system with a PLC controller and touch screen – GPM/5 multi-level horizontal powder coating curing oven with hot air ...

AEROTERM UV coating line was built in 2015 in the Czech Republic by AEROTERM a.s. The line was only used once for testing and is like new. The line is used for the automatic UV coating of flat components made of wood or metal. The process is performed continuously, without the need for manual handling of the workpieces. Transport between the individual stages is performed using a conveyor system. The system consists of: – loading conveyor belt – BSA 900uvkpa automatic spraying machine – ULTRATERM UV770/240two-kpa UV dryer – control system – coating application system UV coating is carried out in the AEROTERM BSA 900uvkpa automatic spraying machine. The unit is equipped with two spray arms, each with two spray guns. The spray guns are designed for applying solvent-free, non-flammable UV varnishes and paints. Their position can be adjusted according to the dimension ...