coating laminating used for sale

A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible.

General SKU289Y465 MakeHermann Linden Serial2034 TypeK II 450 No.4438/4439/2002 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume450 Ltr. Motor45 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity450 l. (850 l.) Trough sizes1000 x 960 x 900 mm With covercheck With jacketcheck Double geared4,5 — 451 rpm/min Motor45 kW 400/690 V Hydraulic tiltingcheck Motor11 kW 400/690 V MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) With jacketcheck General Year of construction2002 LocationBarneveld With switchgear( as is) Floorspace3,45 × 2,18 m Total height2,5 m Weight9.000 kgPaints & coatingsOintmentsStarchRubberAgrochemicalsPlastic & polymersLubricants & oleoAnimal feedConfectioneryZ-blade mixersHermann LindenIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > OintmentsIndustries > Food ...

Sturm Coating System Description: For sale is a used coating plant from the manufacturer Sturm, formerly used at the Mercedes-Benz plant in Hamburg for the machining of rear axle beams. Technical data & scope of delivery: Manufacturer: Sturm (plant) / KUKA & Yaskawa (robot) Year of construction main plant: 2019 Former operation: 3-shift (age-appropriate condition) Plant components: Aggregates, dryer and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several replacement KUKA robots (models KR 210L 150-2 / KR 210 2, model years 2006–2012) Related Robot Control Cabinets 2x Yaskawa Robot EPX 2900 1x Thermal aftertreatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to plant maintenance, it is state-of-the-art Electrics & mechanics: Mostly in an age-appropriate or good con ...

Deighton forming machine, Type: Formatic R2200 / 180, Serial number: R2200/22/10/368, Capacity: max 4400 products per hour, Hopper: 20 litres, Belt width: 120 mm, Power: 230VAC, 1Ph, 50Hz, 0.75kW, Dimensions: 1150 x 900 x 1500 mm, Weight: 95 kg, Deighton flattening conveyor, Type: FL, Serial number: FL 16/04/036, Belt width: 175 mm, Power: 230VAC, 1Ph, 50Hz, 0.18kW, Dimensions:1450 x 650 x 1200mm, Weight: 48 kg, Deighton preduster, Type: 200W Econodust M/C, Serial number: ED 22/09/068, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.51kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton battering machine, Type: 200W weir Econorobe M/C, Serial number: WER 22/09/067, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.88kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton mixer, Type: Batter mixer, Serial number: M 22/10/073, Mixer: 200 litres, Power: 230VAC, 1Ph, 50Hz, 1.5kW, Di ...

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Sollich Model : E2 Tempermeter electr. Values : 240 V 50 Hz Details : Top condition, fully functional We offer this device for sale " in existing condition " under exclusion of any warranty/defect claims or representations.

LACO 52 Inline Coating System, Supply voltage: 220V, Weight: 84 kg, Coat volume: 3.5 liters, Connection voltage: 220V, mass: 84 kg, Lubrication volume: 3.5 liters

A Nordson Encore LT powder coating line is for sale The plant was bought new about three years ago, but never put into operation. It is in almost mint condition and has been stored in a dry place.

General SKU291Y518 MakeFryma TypeMS-12 No.M 11499 Year of construction1998 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.12 KW Specified Features - Sand mill Vertical sandmillcheck Capacity0,5 l. Housing dimensions ø 140 x 80 mm Inletø 20 mm Outletø 20 mm With jacketcheck Max. temperature80 °C Motor± 3 kW With variable speed drivecheck Rotor speed1000 - 3000 rpm Without ballscheck With pumpcheck Motor± 0,12 kW (0—550 rpm) With variable speed drivecheck Materialstainless steel 1.4000 (aisi 429) With jacketcheck General With switch(as is) Floorspace1,6 x 0,55 m Total height0,74 m Weight190 kgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsSand millsMinerals & inorganicFrymaIndustries > Ch ...

General SKU291Y521 MakeWab Bachofen TypeKDL-Pilot No.860739 Year of construction1986 Main Features MaterialStainless steel Volume1 Ltr. Motor3.3 KW Specified Features - Sand mill Horizontal sand millcheck Capacity1 l. Housing dimensions Dia, 100x210 mm Inletcheck Outletcheck With mechanical sealcheck With jacketcheck Motor3,3 kW, 380 v. 3350 rpm, (Ex) Rotor speed1310-3350 rpm Material1.0257 St 44.4, 1.3505 100Cr6 With jacketcheck General LocationBarneveld With switchcheck Floorspace0,50x0,52 m Total height0,55 m Weight150 kg Extra information Extra Specifications2x Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsSand millsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical >  ...

General SKU291Y536 MakeFryma SerialL10120 TypeMSZ 18 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor10 KW Specified Features - Sand mill Vertical sandmillcheck Capacity1.1 l. Housing dimensions ø 250 x 130 Outlet25 mm With jacketcheck Motor10 kW 380 V Without ballscheck With pumpcheck Motor0,37 kW 220 V (Ex) Materialstainless steel 1.4006 (AISI 410), Stainless steel 1.4301 (304), 1.4713 (Sicromal 8 / X10CrAlSi7) With jacketcheck General Year of construction1985 Mounted on framecheck LocationBarneveld With switchgearas is (Ex) Floorspace0,8 x 0,8 m Total height1,5 m Weight440 kgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsSand millsMinerals & inorganicFrymaIndustries > Chemical > Paints & coatingsIndustries > Food & ...

General SKU291Y540 MakeFryma TypeCobalt-Mill MS-12 No.M15426 Year of construction1992 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill Vertical sandmillcheck Capacity0,5 l. Housing dimensions Dia. 140x90 mm Inletcheck Outletcheck With jacketcheck Motor3,0 kW, 380 V, 2880 rpm. With variable speed drivecheck Rotor speed1300-3000 rpm. With pumpcheck Motor0,12 kW, 380 v., 1370 rpm Materialstainless steel aisi aws316l 1.4430 With jacketcheck General With switchgearcheck Floorspace0,55x0,80 m Total height0,77 m Weight200 kg Extra information Extra SpecificationsTemperature meter glass broken. Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsSand millsMinerals & inorganicF ...

General SKU440X1396 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Motor30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, ± 1480 rpm: and 30kW, 380 V, 1465 rpm Speed11 kW: ± 1480 rpm. and 30 kW: ± 2051 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0768759 Year of construction1968 Floor space1,2 x 1,4 m Total height1,4 m Weight900 kg Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unitPaints & coatingsPowdered foodsGeneric medicinesStarchAg ...

General SKU440X1456 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Capacity30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, 1480 rpm and 30 kW, 380 V, 1480 rpm Speed11 kW: ± 1090 rpm and 30 kW: 1480 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0772828 Year of construction1972 Floor space1,2 x 1,4 m Total height1,4 m Weight750 Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unit&:nbsp:Paints & coatingsPowdered foodsGeneric medicinesStarchAg ...

General SKU440X1404 LocationBarneveld Material Product contact materialMild steel Extra information Rotor speed7300 rpm Main Features MaterialMild steel Motor37 KW Rotor305 mm Specified Features - Miscellaneous Mill Grindercheck Rotor size305 mm Grinding room sizeø 420 x 55 mm With grinding platenscheck Inletø 100 x 50 mm Feeding with vibro feedercheck Motor2x 18,5 kW (380 V, 2920 rpm) Miscellaneous Mills MaterialMild steel General MakeWedco (type plate missing) TypeSE-12 Year of constructionUnknown Mounted on framecheck Floor space2,0 x 0,9 m Total height1,2 m Weight1000 kg Extra information vibro feeders, type: GKA-11 Paints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsPlastic & polymersMiscellaneous MillsCatalysts & fillersFeed additivesDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedDyes & pigmentsMinera ...

General SKU440X1405 LocationBarneveld MakeWedco (type plate missing) Material Product contact materialMild steel Technical specs Rotor speed7300 rpm Main Features MaterialMild steel Motor18.5 KW Rotor305 mm Specified Features - Miscellaneous Mill Grindercheck Rotor size305 mm Grinding room sizeø 420 x 55 mm With grinding platenscheck Inletø 100x50 mm Feeding with vibro feedercheck Motor2x 18,5 kW, 380V, 2920 rpm Miscellaneous Mills MaterialMild steel General TypeSE-12 Year of constructionUnknown Mounted on framecheck Floor space2,0x0,9 m Total height1,2 m Weight800 kg Extra Specificationsvibro feeders, type: GKA-11Paints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsPlastic & polymersMiscellaneous MillsCatalysts & fillersFeed additivesDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedDyes & pigmentsMinerals & in ...

General SKULY009 CEcheck Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume4636 Ltr. Max.temp.160 °C Surface9.83 m2 Specified Features - Drying oven Vacuum drying ovencheck Max. temperature160°C Number of compartments:1 Capacity4636 l, heating surface: 9,83 m² Internal width1900 Internal depth850 Internal height1250 Electric heatingcheck Electric capacity70kVA Number of doors:1 With air circulationcheck With fancheck With jacketcheck Drying ovens With jacketcheck Connection for the vacuum pumpcheck With vacuum pumpLeybold Motor2,2 kW, 400 V 6500 rpm Specified Features - Drying oven MaterialStainless steel 1.4301 (304) General MakePink Wertheim Serial2023 5156 TypeVUT 1250-1900-850 Year of construction2023 With switchgearcheck Floor space2,00 x 2,65 m Total height2,62 m Weight4000 kg Extra informa ...

For sale is a professional, mobile powder extraction system / spray booth of the SFB brand. The system is ideal for manual powder coating or dust extraction in the workshop and industrial sector. Details & Equipment: Manufacturer: SFB Oberflächentechnik Design: Stainless steel work stand on mobile base (swivel castors) Filtering: Efficient cartridge filter extraction Cleaning: Pneumatic impulse cleaning (compressed air cleaning via switch/control) Safety: EX-proof design (ATEX marking on the control cabinet) Control: Integrated control cabinet (main switch, lighting, cab ON/OFF, cleaning) Working area: Large opening with stainless steel side walls for easy handling of the components Condition: Used condition from business liquidation / production (see original pictures).

Various spare parts for GEMA system

Pistol Control Modules: The many stacked bays on the right are ITW Gema PGC 3 control units. Each module regulates the high voltage (kV) and compressed air supply for a single automatic powder gun. Central control: On the left are the Micro Panel GF1-10 display as well as control units for axis and lifting device movement (A-Z, A-X, B-X) and conveyor belt control. Safety & add-on parts: The OLAER control cabinet cooling unit (for cooling the electronics) and a PAGG fire alarm and extinguishing control panel are also installed on the sides. The cabinet thus controls the entire automatic coating process – from powder conveying and gun settings to hoist and safety control.

Pistol Control Modules: The many stacked bays on the right are ITW Gema PGC 3 control units. Each module regulates the high voltage (kV) and compressed air supply for a single automatic powder gun. The cabinet thus controls the entire automatic coating process – from powder conveying to gun settings

Sell a used, mobile powder coating machine from GEMA (Switzerland) on a sturdy trolley. Control unit: GEMA Powder Gun Control Type PGC 1 Cup / powder gun: GEMA Type PG 1 / PG 1-A incl. hose package Accessories: trolley with undercarriage, compressed air / pneumatic connections, extension tube/nozzle attachment Power supply: 100-240 V (50/60 Hz) Condition: Used with optical signs of age and use (see pictures).

Professional powder coating booth / powder extraction system with filter wall & control system Description: Sell a compact, robust powder coating booth for manual workstations (e.g. for rims, small parts or locksmith work). Type: Open coating booth made of sturdy sheet steel with working opening. Dimensions working opening: approx. 110 cm width × approx. 128 cm height (working depth sufficient for common components). Equipment: Integrated filter wall / extraction in the background Bottom drip pan / pull-out drawer for excess powder (over-spray) Surface-mounted control cabinet / control system on the side wall Hanging option / workpiece holder at the top Condition: Used, solid mechanical condition with usual signs of wear.

General SKU291Y483 LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor4.25 KW Specified Features - Sand mill Horizontal sand millcheck Capacity0,1 l. Housing dimensions ø 90 x 200 mm Inletcheck Outletcheck With jacket1,2 l. Max. temperature70 °C Motor4,0 + 0,25 kW, 400 V With gear boxcheck With ballscheck With pumpcheck Motor0,25 kW (230/400 V 1310 rpm) MaterialStainless steel 1.4571 (316Ti) With jacketcheck General MakeDraiswerke Serial56213 TypePML-H/V Year of construction2000 With switchgearcheck Floorspace0,70 x 0,80 m Total height0,70 m Weight200 kg Extra information Extra SpecificationsWith heating unit inside Volume 0,1 l Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pi ...

General SKU291Y502 LocationBarneveld Main Features MaterialStainless steel Volume1.5 Ltr. Motor1 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions ø 105 x 200 mm Inletø 20 mm Outlet25 x 25 mm With jacketcheck Motor0,75 kW (380/220 V 2860 rpm (Ex)) Rotor speed2860 rpm Without ballscheck Capacity± 1,7 l. With pump3,6 l./min Motor0,12 kW (320/220 V 1400 rpm) MaterialStainless steel With jacketcheck General MakeDraiswerke Serial50215 TypePM 1 Year of construction1980 Floorspace0,8 x 0,5 m Total height0,85 m Weight100 kg Extra SpecificationsVolume 1 lPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsSand millsMinerals & inorganicDraiswerkeIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chem ...

A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/ ...

Format lamination line / lamination line / laminating machine Make Fetzel Type SOVA1 Total power 8 KW Compressed air 6 bar / 250 l/min. Lamination width up to 400 mm Total length 4000 mm, total width 1100 mm, total height 1800 mm With 3 winding/unwinding rollers at the start, heated laminating roller at the top and bottom, laminate winding and protective paper unwinding at the end. Various measuring rollers and deflection rollers. With documentation.

Automatic powder coating line was built in 2018. After a test launch, it has never been used. The powder coating line is designed for the automatic powder coating of metal components with a maximum length of 1500 mm and a width of 380 mm. It enables the performance of the entire technological process, from surface preparation, through the application of powder coating, to the final curing of the coating. The preparation of workpieces for coating takes place in a three-zone chemical section with immersion tanks. There, the elements are cleaned prior to the application of the coating. The process uses demineralised water, which ensures proper surface preparation and enhances coating adhesion and durability. Transportation of parts between successive stages is performed using a Power Free overhead conveyor system with height adjustment. Powder coating takes place in KC-08 spray boo ...

General SKU042W187 LocationBarneveld MakeHenschel TypeHU/G-15 Main Features MaterialStainless steel Volume15 Ltr. Motor1.1 KW Specified Features - Universal mixer Universal mixercheck Capacity15 l. Vessel sizesø 295 x 235 mm With covercheck Manual operated outletø ± 65 mm With motor± 1,1 kW With variable speed drivecheck Rotor speed± 86—535 rpm With lump breakercheck With motor± 0,5/0,75 kW Rotor speed1500/3000 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 General Mach.No.80 08 91 Year of construction1985 With switchcheck Floorspace1,0 x 0,5 m Total height1,3 m Weight290 kgPaints & coatingsPowdered foodsGeneric medicinesGreen FridayCatalysts & fillersDiscountDetergent & surf.CosmeticsFood additivesLubricants & oleoUniversal mixersConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHenschelIn ...

General SKU291Y828 MakeMaso TypeSP-2:: Mach.No.111 05 0205 Main Features MaterialStainless steel Volume1200 Ltr. Motor1.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity600 - 1200 l/h With motor1,5 kW (220/415 V 1465/430 rpm) InletDN50 OutletDN50 Eccentric Screw Pumps MaterialStainless steel 1.4401 (316) General LocationBarneveld Floorspace0,9 x 0,21 m Total height0,3 m Weight100 kgPaints & coatingsEccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicMasoIndustries > Chemical > Paints & coatingsPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIn ...

General SKU291Y830 MakeJohnson LocationBarneveld Main Features MaterialRubber Lined Volume20000 Ltr. Motor1.1 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity± 20 m³/h With motor1,1 kW (230/400 V 680 rpm) InletDN40 OutletDN40 Eccentric Screw Pumps MaterialRubber, Stainless steel 1.4408 General Floorspace0,75 x 0,36 m Total height0,4 m Weight50 kgPaints & coatingsEccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicJohnsonIndustries > Chemical > Paints & coatingsPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed addit ...

General SKU291Y528 LocationBarneveld MakeAllweiler Main Features MaterialStainless steel Motor18.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor18,5 kW 380 V 1480 rpm InletDN100 OutletDN100 Eccentric Screw Pumps MaterialStainless steel 1.4301 (304) General TypeUnknown Mounted on framecheck Floorspace3 x 0,45 m Total height1 m Weight500 kg Extra Specifications2 pumpenPaints & coatingsEccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicAllweilerIndustries > Chemical > Paints & coatingsPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries ...

General SKU291Y811 MakeAllweiler TypeSNZP 380.1 HX1 P11 Mach.No.7610158 Year of construction1998 Main Features MaterialStainless steel Volume167 Ltr. Motor3.6 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor3,6 kW (400 V 1430 rpm (Ex)) InletDN 300 OutletDN 100 Eccentric Screw Pumps MaterialChromed steel General Mounted on framecheck LocationBarneveld Floorspace2,35 x 0,45 m Total height0,70 m Weight300 kg CEcheck Extra SpecificationsQ= 30—167 l/min, N=60—220 l/minPaints & coatingsEccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicAllweilerIndustries > Chemical > Paints & coatingsPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Ch ...

General SKU316Y654 LocationBarneveld CEcheck MakePalamatic Main Features MaterialStainless steel Motor4.4 KW Specified Features - Bag dump station Capacity5 bags/min With motor4,4 kW, 400 v. Bag dump stations MaterialMild steel, Stainless steel 1.4301 (304) General TypeMinislit 3000 No.TOT-1507 Year of construction2016 Mounted on framecheck Mounted on legscheck Weight2100 kg Extra information Extra SpecificationsAutomatic bag dump station for all bag types (except jute), bags are cut along the front edge and down both sides, With vacuum bag manipulator on slewing jib crane, inclined bag infeed belt conveyor with pneumatic pre-crusher, cutting unit, Screw compactor for empty bag evacuation into PE sleeve, Integrated dust collector with filter cartridge DN325, height 1000 mm, fan and filter cleaning system, Telescopic filling tube with inflatable seal and DN300 butter ...

Feeder Mailandet 466 coater LTG oven Incenerator Double stacker Full electric upgrade in 2024 Max sheet format: 1145x960 Up to 5,500 sheets per hour

Description Item #8985 - FLAVOUR COATING AND SEASONING LINE FOR EXTRUDED SNACKFOOD / BREAKFAST CEREAL PRODUCTS Manufactured by SCHAAF All from Year 2018. Line includes : TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm. TYPE 282 DRUM DRIER/ROASTER 1600 PTFE, Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures ...

Complete coating line including: Feeder Mailander 460 coater, year 1981 GAS oven 30m, year 2000 Double stacker Bundle turner Max sheet format 1145x980 Upgraded with pneumatic system for feeding

GIARDINA GROUP automatic powder coating line was built in 2018 in Italy by Giardina Finishing S.r.l. The line is characterised by a low level of wear, with a total operating time of approximately 6 months. During this period, it was used for coating panels intended for sectional doors. The GIARDINA GROUP powder coating line was designed for the comprehensive powder coating of flat metal components with maximum dimensions of 6000 x 1300 mm. The entire process is performed continuously, without the need for manual handling of the components. Transportation of parts between the individual stages is performed using a conveyor system. The system consists of: – BR-6000 loading roller conveyor – Dualtech 416 SB Dry automatic spraying machine – electronic control system with a PLC controller and touch screen – GPM/5 multi-level horizontal powder coating curing oven with hot air ...

• Dimensions of the painting window 1400 width x 1200 mm height • External dimensions 2050 width x 2400 height x 1620 mm length • Filter cleaning system Automatic romer Jet • The type of sheet used: Black steel painted with insulating paint • Max. paint cost 500g/min • Light power 0 watts Electrical/pneumatic data • Type of electrical installation 380-420V 50-60Hz (3P N + PE) • Electrical connection 2.2kW • Pneumatic connection (cabin) quick connector / PUPE10x8 • Air consumption (cleaning) ~300Nl/min • Required air quality – oil below 0.1 mg/Nm3 • Required air quality – water vapor below 1.3g/nm3 Controls • Computer control – 4-inch touch panel • Real-time clock with date • 3 operating modes • Automatic – Filter Clogging Sensor, Automatic – Timer, Manual • Automatic filter cleaning • Settings for distance between fi ...

PLP MT100 Paddle coating machine 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor

Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil,

General SKUCY001 MakeNETZSCH (NETZSCH-Feinmahltechnik GmbH) Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialCeramic Volume21.95 Ltr. Motor30 KW Specified Features - Sand mill Horizontal sand millcheck Capacity21,95 l. With sieve0,40 mm at drain plug + slotted pipes (spare screens 0,7 / 0,4 / 0,2 mm) With mechanical sealcheck With jacketwater cooled, approx. 2300 l/h, max. 3 bar Motor30 kW, 400 V / 50 Hz (Ex de IIB T4) With variable speed drivecheck Rotor speedPeripheral speed 4,6–13,7 m/s (9,1 m/s at 50 Hz): With pumpcheck MaterialCeramic, Glass, Stainless steel With jacketcheck General TypeAgitator mill DISCUS 30 – DISCUS INTENSIVE grinding system (horizontal bead mill) Year of construction2021 Mounted on framecheck With switchcheck Floorspace1,7 x 1,1 m Total height1,8 m Weight1300 kg Extra information Extra Specific ...

Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement.

AEROTERM UV coating line was built in 2015 in the Czech Republic by AEROTERM a.s. The line was only used once for testing and is like new. The line is used for the automatic UV coating of flat components made of wood or metal. The process is performed continuously, without the need for manual handling of the workpieces. Transport between the individual stages is performed using a conveyor system. The system consists of: – loading conveyor belt – BSA 900uvkpa automatic spraying machine – ULTRATERM UV770/240two-kpa UV dryer – control system – coating application system UV coating is carried out in the AEROTERM BSA 900uvkpa automatic spraying machine. The unit is equipped with two spray arms, each with two spray guns. The spray guns are designed for applying solvent-free, non-flammable UV varnishes and paints. Their position can be adjusted according to the dimension ...

The Chocoma chocolate coating machine pictured is sold. This comes from a confectionery and was used to coat Baumkuchen with chocolate. It is an older machine, which should possibly be improved at one or the other corner. Nevertheless, the machine works, a video of the test run is available on YouTube, just enter the ebay article number there. The machine must be thoroughly cleaned before use More pictures available

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...

Electric convection oven SL 15kW,Passage oven, indoor BHL: 1300x2000x1300 Floor Rails, 7" Color Touch Screen, MTS System, Wall thickness from 240mm to 300mm, circulating fan 1.1kw; Ventilation flap electric with separate fan f. Ventilation electric.

Powder coating booth with multicyclone and post-filter For sale is a professional complete industrial system for powder coating: A Gema Volstatic powder coating booth of the type MRS (multi-cyclone recovery system with post-filter). The system stands for the highest Swiss quality, extreme robustness and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters or workshops looking for a high-performance and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multicyclone and post-filter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Cab substructure with inlet, hand coating opening and gun driving slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection t ...

Powder Coating Booth with Filter Trolley & Fluid Bottom For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. It is the proven MRS system (Multirecover System), which ensures highly efficient powder recovery (overspray extraction) and clean work in the workshop. The system is extremely robustly built and is ideal for manual operation (hand coating) thanks to the generous hand coating opening. Technical data & connected loads: • Manufacturer: Gema Volstatic AG • System / Type: MRS Cabin with Filter Trolley and Fluid Bottom • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase current) • Compressed air connection (inlet pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: water vapour content max. 1.3 g/m³, oil content max. 0.1 ppm • Compre ...

General SKU224Y101 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor4 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4305 (303) General MakeSAM TypeBag dump station Year of construction2019 Mounted on legscheck With switchgear(as is) Floorspace1,2 x 1,2 m Total height3,3 m Weight1.000 kg Extra information Extra SpecificationsWith WAM puls-jet dustfilter motor: 4 kW (400 V, 2670 rpm, (Ex)) 14 filtercartridges (total 2,5 m2 surface) Paints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchBag dump stationsRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsDetergent & surf.Food additivesSugarAnimal feedSolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicGerickeIndustries > Chemical > Paints & coatingsIndustries > Food & Fee ...

General SKU280Y280 LocationBarneveld MakeHosokawa Alpine Material Product contact materialStainless steel Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) Jet Mills MaterialStainless steel 1.4305 (303) General Serial167821 Type100 AFG No.28198/1 Year of construction1990 Mounted on framecheck With switchcheck With switchgear(as is) Floor space1,9 x 1,1 m Total height2,1 m Weight500 Extra information - three configuration of product flow possible Paints & coatingsJet MillsPowdered foodsGeneric medicinesStarchAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedDyes & pigmentsNew arrivalsMinerals & inorgani ...