co2 tank used for sale

Inv. Num. : 7908 Type: Platino Fiber Producer: Prima Power Created: 2018 Parameters: Maximum power: 4 kW Switch-on hours: 14991 h Hours: 8209 h Work table length: 3000 mm Work table width: 1500 mm Machine weight: 10,000 kg Equipment: New cutting head

MEMMERT ICO150 Incubator/Co2 Oven Equipment in new condition, never used. MEMMERT Part Number: ICO150 Year of Manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Display with wide display Temperature: amb + 5 °C up to + 50 °C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180 °C without the need to remove the probes Dimensions W x D x H int.: 719 x 591 x 1066 mm Dimensions W x D x H ext.: 560 x 400 x 700 mm Temperature: ambient + 5 to 50 °C Weight: 92 kg Gross weight: 116 kg Slightly deformed side plate (see photo) This does not hinder the proper functioning of this equipment in any way

9 inch cutting lense Retractable clamps (4) VPN Teleservice - Laser Type: FP4000 3.x - Working area (X x Y x Z): 3.048 x 1.524 mm - Max. workpiece weight: 800 kg - Positioning speed X/Y: 300 m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 12 mm - Maximum material thickness aluminium: 8 mm - Control: Siemens 840 D - Machine ON Working hours: 40.941 h - Beam ON Working hours: 21.798 h - Power: installed max: 15 kW - Weight: 24.500 kg - Dimensions (long x wide x high): 9.503 x 2.560 x 2.672 mm

THERMO SCIENTIFIC 8000 WJ CO2 Incubator / Oven Water Jacket Technology (WJ) Model 3429 Capacity: 184L CO² range: 0 to 20% CO² inlet pressure: 103.4 kPa. CO₂ sensor: CT Temperature range: +5°C UT to +50°C. HEPA filter inside. Glazed interior door. Aluminum control panel with digital display. 4 stainless steel shelves 1 container of water External dimensions HxWxD: 100x66x60cm. Interior dimensions HxWxD: 68.1 x 54.1 x 50.8 cm. 230V 50/60Hz. Net Weight: 120.2 kg Equipment tested at 37°C with a CO2 level of 5% In excellent working order and aesthetics Slight rust marks on the back of the outer shell (see photos) HEPA filters will need to be replaced The equipment will be delivered with the water jackets emptied. It is imperative to fill them in before you can use the equipment according to the manufacturer's recommendations Year of Manufacture: 2009

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Laser Type: CO2 - Max. workpiece weight: 710 kg - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 10 mm - Control: SINUMERIK 840D - Machine ON Working hours: 56.734 h - Beam ON Working hours: 28.407 h - Weight: 11.500 kg - Dimensions (long x wide x high): 9.300 x 4.600 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 3.000 x 1.500 x 80 mm - Laser Type: CNC Fanuc 31iLB - Max. workpiece weight: 950 kg - Positioning speed X/Y: 120/120/40 m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 25 mm - Machine ON Working hours: 36.200 h - Beam ON Working hours: 11.796 h - Dimensions (long x wide x high): 3.000 x 1.500 x 100 mm - Weight: 5.700 kg

Used machine in good condition. Available for immediate delivery. - Laser Type: CNC Fanuc 31iLB - Max. workpiece weight: 950 kg - Positioning speed X/Y: 160 m/min - Laser Output: 6 kW - Machine ON Working hours: 19.600 h - Beam ON Working hours: 5469 h - Weight: 5.700 kg - Dimensions (long x wide x high): 3.000 x 1.500 x 100 mm

Totally overhauled machine between 2017-2018 - Laser Type: CO2 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 900 kg - Positioning speed X/Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Consumption values CO2: 1 l/h - Consumption values N2: 6 l/h - Consumption values He: 13 l/h - Machine ON Working hours: 50.000 h - Beam ON Working hours: 24.456 h - Weight: 12.000 kg - Dimensions (long x wide x high): 11.250 x 4.600 x 2.400 mm - Electric consumption entire unit: 33 - 72 kW

- Turret with 20 station (two Multi-Tool stations) - UP Forming option. - Operating hours: 21.500 - Number of turret stations (pcs): 20 (2x Index) - Number of turret stations (pcs): 20 - Working area max: 3.000 x 1.500 mm - Punching force: 300 kN

Used machine in good condition. Available for immediate delivery. - Working area punching / laser (X x Y): 2.530 x 1.270 mm - Max. workpiece weight: 200 kg - Punching force: 200 kN - Maximum material thickness mild steel laser: 8 mm - Control: Siemens 840 D - Material thickness aluminium max: 8 mm - Material thickness stainless steel max: 8 mm - Laser Type: CO2 - Number of turret stations (pcs): 20 - Dimensions (long x wide x high): 6.700 x 8.000 x 2.600 mm - Weight: 17.000 kg

Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.

Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible.

A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025.

Suitable for marking cans, speed: 1500 characters/s, line speed: 400m/min, operating system: Windows CE, marking field: 58x58-452x572mm, throughput: 150 pieces/min, wavelength: 10.6µm, can diameter: 99/127/153mm, can height: 123-216mm, length: 776mm, width: 140mm, height: 140mm, weight: 22kg. The device is still in its original packaging, with documentation, an on-site inspection is possible.

1. Compressors Rack Teko ROXSTA 2.O, with 4x Co2 Compressors Bitzer 4DTC-25K-40P, and 1x Co2 Compressor 4FTE-20K-40S, and original control cabinet - Compressors Type: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Volume: 21.2 m3/h (x4), 17.5 m3/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Dimensions of the compressors rack: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of production : 2018 2. Evaporators - 5 pieces Guntner S-DHN 051C/24 dual discharge, full steinless steel ( Housing and block made of stainless steel ) - Type: S-DHN 051C/24- - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface: 101.9 m2 - Air flow: 11 240 m3/h - Fin spinning: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Housing and block made of stainless steel - Year of product ...

This SEI MERCURY 603 1520 350W Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 18,5 kW.

This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information.

This Prima Power CP 4000 Zaphiro Laser Cutting machine was manufactured in the year 2013 and has 37978 laser hours. The machine has a laser power of 4 kW.

1x CO2 Laser serial number I100213230134, year of manufacture 2023, condition new; 1x laser source Synrad Firestar T100, model FST100SFC-m-5M, various cables Auction-ID: A1-45187-401

This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine.

This 3-axis Trotec Speedy 360 was manufactured in 2019, featuring a robust CO₂ laser system with a power range of 40-120W. It offers a maximum working area of 32 × 20 inches and supports a variety of materials with its multifunctional table options, including a vacuum table and honeycomb cutting tabletop. Ideal for precise cutting and engraving, this machine includes JobControl® Expert Software for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the Trotec Speedy 360 machine we have for sale. Contact us for further details regarding this machine.

This AMADA LC-2415 ALPHA IV was manufactured in 2008. A CO₂ laser cutter with a 2.0 kW power rating, it handles a working area of 4000 mm × 1550 mm. It can cut steel up to 10 mm, stainless steel up to 8 mm, and aluminium up to 3 mm. With a table load capacity of 330 kg and a total weight of 7.5 tons, it remains operational and testable. Contact us for more information about this machine.

This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information.

This AMADA LCG-3015 was manufactured in 2014. It features a CO₂ laser oscillator AF3500i-C with 3.5 kW power, capable of cutting up to 19 mm mild steel, 9.5 mm stainless steel, and 8 mm aluminum. The machine supports a maximum workpiece weight of 920 kg and has rapid feed rates of 170 m/min. For more information about this machine, please reach out to us.

This Mazak SUPER TURBO-X 612 MK III G was manufactured in 2015. It features a maximum cutting area of 2000 × 4000 mm and a resonator power of 4 kW. Standard equipment includes an Automatic Nozzle Changer, Auto Calibration, and a Safety Cover. Additional features like a 2-Pallet Changer and a Dust Collector enhance its functionality. If you are looking to get high-quality cutting capabilities, consider the Mazak SUPER TURBO-X 612 MK III G machine we have for sale. Contact us for more information.

This 3-axis Prima Power Platino CP4000 was manufactured in 2008. It features a 4 kW power capacity, 18,300 operating hours, and a double table with automatic loading and exchange. The working table measures 3000 mm x 1500 mm. It can cut steel sheets up to 10 mm, wood, and acrylic. Consider the opportunity to buy this Prima Power Platino CP4000 CO2 laser cutting machine. Contact us for more information about this machine.

This Bystronic Bysprint Pro 2015 was manufactured in 2012. It features a 4.4 kW laser power and a working area of 3000 x 1500 mm. It can process stainless steel up to 20 mm, aluminum up to 12 mm, and steel up to 25 mm. Operating hours are 34,000 with a total of 80,000 hours under power. Consider the opportunity to buy this Bystronic Bysprint Pro 2015 co2 laser cutting machine. Contact us for more information.

This 3-axis Prima Industrie Platino 1530 PL 9000 was manufactured in 2001. It features a CO2 laser cutting machine with X-axis travel of 3000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 150 mm. Maximum linear speeds reach up to 40 m/min on the X and Y axes, and 20 m/min on the Z-axis. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 PL 9000 machine we have for sale. Contact us for more information.

This 3-axis TRUMPF TruLaser 1030 was manufactured in 2011, featuring a robust fiber laser, TruDisk 2001, with a 2 kW output and a maximum material thickness capacity for mild steel at 25.0 mm. It operates with a SIEMENS SINUMERIK 840D control and can handle a maximum workpiece weight of 720 kg. If you are looking to get high-quality cutting capabilities, consider the TRUMPF TruLaser 1030 machine we have for sale. Contact us for more information.

This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information.

This Bystronic ByAutonom 3015 was manufactured in 2014. A robust CO2 laser cutting machine from Switzerland, it features a 6kW laser power and can handle steel up to 25mm thick. With a maximum positioning speed of 169m/min and a quick table changeover time of 22s, its designed for efficiency. Consider the opportunity to buy this Bystronic ByAutonom 3015 CO2 laser cutting machine. Contact us for more information about this machine.

This 3-axis TRUMPF TruLaser 5030 + LiftMaster was manufactured in 2010. It features a watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster aIf you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information.

This LVD Orion 4KW was manufactured in 2012. It features a Fanuc Series 16iLB control and a FANUC Laser C400i-B source, ensuring reliable operation. With 11,000 working hours and a sheet size capacity of 1500 x 3000 mm, it includes a loading & unloading station. Regular maintenance has been performed by the manufacturer. Contact us for more information about this machine.

This TRUMPF TruLaser 1030 laser cutting machine was manufactured in 2011. It features a CO2-Laser TruCoax 2500 with radio-frequency excitation, integrated chiller unit, and a fully automatic pallet changer. Ideal for high precision processing, it includes a 7.5 lens cutting head with height regulation and sheet edge detection. A robust choice for any shop floor with its comprehensive safety features and easy programming capabilities. For more information about this laser cutting machine, please reach out to us.

This Bystronic Bysprint Pro 3015 was manufactured in 2012. It features a BYSTRONIC ByLaser 4400 CO2 laser and is equipped with BYSTRONIC ByVision CNC control and a BYSTRONIC Byloader 3015 sheet loader. If you are looking to get high quality cutting capabilities consider the Bystronic Bysprint Pro 3015 machine we have for sale. Contact us for more information.

This TRUMPF Trumatic L6050 was manufactured in 2006. A robust laser cutting machine featuring a SIEMENS SINUMERIK 840D controller, it handles a maximum workpiece weight of 1.900 kg. It efficiently cuts through mild steel up to 20 mm, stainless steel up to 15 mm, and aluminium up to 10 mm. Ideal for large-scale operations with a working area of 6.000 x 2.000 mm. For more information about this laser cutting machine, please reach out to us.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine.

This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information.

This 3-axis Bystronic BySpeed 3015 was manufactured in 2006. It features a maximum sheet size of 3000 x 1500 mm and is equipped with a powerful 4400 watt CO2 resonator. With recent upgrades including a W-axis replacement in 2025 and a blower replacement in 2023, this machine is well-maintained. The machine includes a ByTrans Extended. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 3015 machine we have for sale. Contact us for further details.

This 3-axis Mazak Hyper Gear 510 was manufactured in 2005. It features an X-Y-Z axis stroke of 3070 × 1545 × 100 mm and a maximum workpiece size of 3050 × 1525 × 25 mm. With a rated laser output of 4000 W, this CO₂ laser cutting machine is designed for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Mazak Hyper Gear 510 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

This 3-axis Prima Industrie Platino 1530 was manufactured in 2011. It features a working area of 3000 x 1500 mm and is equipped with a CO₂ laser with a power class of approximately 3000 W. The machine has a total length of about 8,388 mm and a width of approximately 3,050 mm. If you are looking to get high-quality laser cutting capabilities, consider the Prima Industrie Platino 1530 CO₂ laser cutting machine we have for sale. Contact us for further details.

This 3-axis Bystronic BySpeed 4020 was manufactured in 2012. It features a maximum sheet size of 4000 x 2000 mm and is equipped with a 4.4 kW CO2 resonator. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 4020 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Staffelstein tank, good condition. Dimensions: H = 2, 00 m (tank) H = 2, 50 m (total) W = 1, 00 m L = 1, 60 m (tank) L = 1, 70 m (total) Overground, upright tank, incl. 4 steel feet/ cones, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personal ...