co used for sale

We sell here a combi steamer from the manufacturer Convotherm type OES 6.10 in a very good used and functional condition. Runs on 400 volts, 11.4 kW, built in 2009, with base, 6 bays for sheets 60x40 cm, retractable door, workshop tested, immediately ready for use, dimensions B/D/H 95/80/190 cm, more on request.

Comec conveyor belt Brand: Comec A.A length = 10,000 mm Belt width: 500 mm Drive: Electric motor with gearbox A.A length = 5700 mm Belt width: 650 mm Drive: Electric motor with gearbox

COMPRESSOR BRAND: ATLAS COPCO TYPE: GA 808 PACK PRESSURE: 8 BAR ENGINE 75 KW, BRAND: SIMENS.

New raw coffee loader for loading green coffee in the hopper of your roaster Compatible with every coffee roaster between 5kg and 30kg batch size Loading speed of 12kg/min Including: - cart with built-in scale, - advanced filtered suction system, - roaster hopper feeder with rack Made of Stainless steel Monophasic electricity Dimensions of the bean cart (WxDxH): 90x62x64cm Dimensions of the motor with pump (WxDxH): 47x35x105cm Hopper feeder: Dimensions (WxDxH): 28x28x45cm Little discount possible if purchased along with a Coffee roaster Shipping worldwide possible Type "The roasters agency" in the search bar to see other listings

feed pressure: 10,0 bar intake capacity: 539 L/min Effective free air delivery: 377 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 3,0 kW weight of the machine ca.: 80,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Direc ...

feed pressure: 10,0 bar intake capacity: 727 L/min Effective free air delivery: 582 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 4,0 kW weight of the machine ca.: 91,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directi ...

feed pressure: 8,0 bar intake capacity: 180 L/min Effective free air delivery: 112 L/min Receiver capacity: 6,0 Ltr. motor: 230 V power capacity: 1,1 kW weight of the machine ca.: 14,0 kg. dimensions of the machine ca.: 380 x 310 x 490 mm Description : - portable craftsman piston compressor - permissible duty cycle up to 30% - 1-stage, direct-coupled, single-cylinder airend - Compressor mechanics working completely OIL-FREE - Very compact design for easy handling - Finely ribbed cylinder and cylinder head - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - an automatically regulating pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges - Safety valve - pre-assembled connection cable with p ...

feed pressure: 10,0 bar intake capacity: 345 L/min Effective free air delivery: 228 L/min Receiver capacity: 50,0 Ltr. motor: 230 V power capacity: 2,2 kW weight of the machine ca.: 51,0 kg. dimensions of the machine ca.: 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place  ...

PROD. COMPAIR TYP RA100 S/N 349010/1318 ROK 2000 MOC (kW) 55 WYDAJ. (m3/min) 9.8 CIS (bar) 10 GODZ (DOC/OGÓL) ok36000

PROD. CompAir TYP L200-10A S/N 349031/0012 ROK 2005 MOC (kW) 200 WYDAJ. (m3/min) 31 CIS (bar) 10 GODZ (DOC/OGÓL) ok33000

voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5

Automatic sugar coating machine Brand: Narong Industries Model: Rama NR Cota 19 series 5 DRUM DIAMETER: 19 / 48 cm CAPACITY: 3 to 7 kg Blowing / Extraction / Rotation Option - Heating - Speed variation - Extraction temperature measurement - Supply air temperature measurement - Spray pressure measurement - Light: interior lighting Research and development / Pilot unit

A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Equipment layout plan + cip system . pdf 1 Glatt GC 750/500 coating unit - drive motor : 1,1 kW - 380 V - 50 hz - IP 54 - Ex - air inlet fan : 1000 m3/h - 6860 rpm - 2003 Pa - Max 80?C - 1,1 kW - IP 54 - air outlet fan: 1200 m3/h - 2900 rpm - 1030 Pa - Max 80?C - 7,5 kW - IP 55 - Drum speed: 2 - 18 rpm - Sold with two perforated drums ?500mm and ?750 mm - Adaptable 2-head spray arm + Peristaltic pump - Spare parts, seals, ... - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h 1 Air treatment unit 1 Wanson CD-36 steam boiler - Power: 36 kW - Steam output: 48 kg/h - Operating pressure: 5 bar - Temperature : 159?C - Water volume: 10 L  ...

Material: stainless steel Double screw: 2 nylon brushes in two sections: ? 200 mm x 3000 mm Quick disassembly Mounted on a mobile frame: 4 wheels Power: 0,55 kw Speed controller : mechanical Support for feeders and dosing systems Overall dimensions 3800 x 550 x 1700

Manesty ? ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP sy ...

Equipment used for coating of food or pharmaceutical products. Non-tilting stainless steel turbine 2 liquid spraying ramps / 2 powder spraying ramps Complete installation with : - 2 x interchangeable spraying / coating arms including each: 1 liquid spraying ramp with double heating jacket + 1 powder spraying ramp. - Accurate unit dosing powder (screw system) - Galvanised steel frame / mobility rail for the 2 spray arms (easy switching) - Lateral unloading trolley - Ventilation / air treatment unit - 8 weights / scales on the feet - Electrical cabinet - 500 litre melting tank skid Max. load 3000 kg One-sided loading, Central unloading with reverse rotation Length 8 m x diam. 2.2 m + Documentation and drawings available

Filter fitting, filter unit COMPAIR for compressor systems Air Filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2 Flow rate: approx. 8.5 m³/min Filter element no.: CE 0087B - Filter housing made of aluminium Weight: 5 kg Dimensions L x W x H 125 x 110 x 420 mm good condition; used

Knuckle Joint Press COLOMBO AGOSTINO 1000 ton dimension table 1000 x 650 mm dimension slide 1000 x 600 mm Year 1991 In excellent working condition

Column Mounted Crane 2 T MANUTENTION CONNECTION type PFSP Capacity: 2 Tons Arm travel: 2000 mm Year of construction: 2001 Column diameter: 400 mm Max height under hook 2200 mm Column height: 3100 mm Height under beam 2800 mm Electric hoist 2 T

Table length: 6000 mm Table width: 1050 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: HeidenHain TNC 426 X-Axis:         4300mm Y-Axis:         1200mm Z-Axis:         1500mm Table Length:   6000mm Table Width:    1050mm Table load:     20.000 Power on spindle:36kW Spindle speeds: 3000Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:10000mm/min. Feed rate Y-Axis:10000mm/min. Feed rate Z-Axis:10000mm/min. Length:         9500mm Width:          4800mm Height:         3485mm Weight:         28000kg

SECOND-HAND MILLING MACHINE FOR CORNER SEATS COMEC MOD. FAS2 - S/N 951106 -Volt. 380/50

116.3 m3/hour 68.4 cfm Max output: 9,75 bar voltage: 400V Volume flow rate: 32,3 liter/sec Length: 1267 mm Width: 790 mm Height: 1590 mm Weight: 343 kg

2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection

- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %

78 pieces Corletten – used – : Price ex location: only 119.-€ / piece (net) Priority complete sales! Manufacturer: Cordes Type: Universal Color: black Particleboard base plate Height: approx. 1.81m Width: outside 1,28m, inside 1,20m Depth: outside 1,15m, inside 1,10m Foldable stackable Available: as of now Condition: used, see photos, Corletten can have slight damage e.g. on the chipboard Location: Herford area

COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...

A compressor is sold that has been discarded because of a new purchase. Diesel mode Volume flow 51 l/s Nominal pressure 6 bar Rated speed 2400 1/min Engine power 25Kw Dimensions: ca 1,8m1,1m1,2m high Weight approx. 900kg

COMPRESSOR OIL FREE 90 KW ZT 110 KW ZT 7.5 BAR DRYER FD 560

Screwcompressor with variable speed (n-drive) max 13 bar max 153 liter/sec - 9 m3/min 50 kW ElektronikonII control Weight: 1132 kg

Module converter -Type: S 909 -Price: per piece -Number: 2x available -Weight: 6.3 kg

Atlas Copco - Scroll Compressor Suitable - for printing machine - machine tool - workshop Functional - can also be used as a spare parts dispenser Type: SF40 / FF10 Year of construction: 2001 HDM.Nr.: L4.102.1901 Serial number: A-II - 605703 Max-Bar: 10 bar KW - Power: 3.9 / 50 Hz Weight: approx. 180 kg

TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...

We offer an Atlas Copco compressor Power - 451 KW max. Working pressure - 7.5 bar

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48" (1219.2 mm) Pan mouth diameter: 19" (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75" (1917.2 mm) Floor space: 61" x 50" (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible a ...

PROD. ATLASCOPCO TYP XAS136 S/N YA306247140447207 ROK 2004 MOC (kW) 56 WYDAJ. (m3/min) 8.1 CIS (bar) 7

Air Pressure: 42 bar

plug -Type: SACC-M12FR-5CON-PG9-M -Number: 65x available -Price: complete -Weight: 4.5 kg

Output module, control card, output card, controller -Control -Component carrier type: C-SPS-14 -Dimensions: 375/200/H200 mm -Weight: 3.8 kg

Convotherm OES 10.10 combi steamer electric - with base - Disappearing door - door disappears to the side of the damper when opened 10 bays GN 1/1 Functions: Steam, Combi Steam, Hot Air Crisp&Tasty USB interface integrated in the control panel Standard equipment Steam (30-130°C) with guaranteed steam saturation Combined steam (30-250°C) with automatic Humidity adaptation Hot air (30-250°C) with optimized Heat transfer easyDial control panel Digital Display Regeneration Function ProductsRegenerate 99 cooking profiles, each with up to 9 steps Multi-point core temperature sensor Door handle with safety lock, preheating and cool-down function Metrics: Height with base: 182cm x Width:94cm Door pushed to the side: 103cm x Depth:82cm + 8cm handle Device is fully functional Contacts for personal arrangements: Mr. Avanesyan +49 176 56358605, Mr. Oswald +49 176  ...

Cofely Quantum X060-S2CL-LL chiller 600 kW All Quantum Air models are characterized by maximum efficiency, maximum cooling capacity, convenient control and excellent serviceability. Features of the Quantum Series: Turbo liquid chiller for applications from 250kW to 3MW Oil-free system High operational reliability Low maintenance, low vibration and quiet operation Multi-compressor design Precise control of the recooling process through variable capacity control Highest energy efficiency with excellent performance values (COP) Nominal power: 600 kW Number of compressors : 2 max. heat transfer fluid outlet: 38°C - 50°C min. refrigerant outlet : –5°C - 4°C max. current consumption: 275 A Refrigerant: R134a Capacity: 120kg Refrigerant: Water Refrigerant volume: 71.5 m³/h According to ENGIE, the Quantum chillers can be easily converted to the 513A refriger ...

Complete line for packing, edging and filling boxes. Detailed description

approx. 1.200 pieces Corletten, width 2m - used - : Prices (net) per piece ex location: up to 20 pieces: 129.-€ up to 60 pieces (approx. truck load): 119.-€ from 200 pieces: 109.-€ We reserve the right to have a minimum purchase quantity! Manufacturer: Cordes Harsefeld Type: Furniture Corlette Year of construction: approx. 1993 Load capacity: 600 kg Weight: approx. 85 kg 3-fold stackable Load 600 kg V-drawbar for attachment and a barcode for storage location assignment External height 180 cm Height inside 160 cm External width 203 cm Width inside 191 cm External depth 119cm Depth inside 110 cm Condition: good Available: now Location: Coburg area

Compressor/Atlas-Copco/mobile Type XAHS 186 DD Year of construction 2008 In the case of the 1881 h Motor 104 KW Weight 1975 kg ABE K 582 Green license plate Location Lower Saxony, currently in the service workshop I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are gross and negotiable! The included VAT will be shown on the invoice. Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Key data: 75 , 12 , 12

We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hours: - electric 37756 / Compr. 20546 - Permissible operating pressure: 12 bar - Operating temperature: 75-85°C Engine - Nominal power: 75 kW - Engine speed: 1500 1/min - Degree of protection: IP ...

We sell here the Robot Coupe Blixer 45 A, 45 L, as can be seen in the pictures, with the accessories shown. This device gives you two features in one! : The Blixer combines the features of two well-known devices in one - that of a cutter and that of an emulsifier-mixer device. It makes it possible to mix all kinds of raw and cooked foods into liquid, semi-liquid or pulpy end products Efficient: Thanks to its large liquid capacity and its lid with wiper and sealing ring, this appliance allows you to prepare all kinds of mixed food and even tube feeding. Reliable: Knife with patented new blade profile for optimal cutting quality. Regular cutting and guarantees perfectly uniform processing even with the smallest quantities. This device is equipped with 2 blades as standard, but can be optionally extended to three blades. The third blade can be ordered for an extra charge. Due to th ...

PROFESSIONAL COFFEE FILTER MACHINE COFFEE QUEEN TOWER. Filter coffee machine with vacuum thermoses Coffee Queen Tower is a fast, flexible bulk coffee brewer with a hot water outlet for tea. It features digital display, full and half-brewing function as well as a signal to indicate when the coffee is ready. Brewing can take place on both sides simultaneously and the digital display shows the current temperature, brewing in progress and volume on each side. Characteristics: • Fast and easy to handle bulk brewer with hot water tap. • 2 uniquely designed 5 litre serving stations (vacuum thermoses) with tap, sight gauge and integrated handle grip. • Rotating function for easy handling. • Brewing on both sides at the same time. • Option for full- or half brew and brewing-complete signal. • Full brewing, 10 litres takes approx. 7 minutes. • Thermos with temperature drop o ...

Battery of 5 self-stripping silos with loading trolley. 400 kg capacity each.

Set of 10 x 2kg automatic 220v 3000w electric roasters from 2014. 10 x Avirnaki fume filter available to roast without extraction. Easy-to-use, reliable and robust machine, offering high production consistency even for inexperienced users, as well as optimum operating comfort. Unit sales available.