co used for sale

COGENTECH COLUMN DRILLING MACHINE TYPE VD40C -MK4 -Electromagnetic automatic voeding -50/1450 t/m -Draait right en linksom -Tapfunctie -Uitlading 180 mm -Table of 560 x 560 mm -Tandwielaangedreven -Koeling -Beschermkap -Noodstop -Verlichting -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Oil-free, air-cooled, scroll compressor with refrigerant dryer. Zero working hours. Machine unused - new! Machine available because of purchase mistake!

Rotary screw air compressor 160kW, 8.6 bar, 25 m3/min.

Rotary screw air compressor ZR 500, 525kW, 7.5 bar, 83.20 m3/min,

355 kW, 50.60 m3/min, 10 bar, oil-free, water cooled. HP 1 x replaced element.

To check torque on air and electric screwdrivers.

Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 MACH - ID 6109 Make:    Nicolas Correa Type      :L30-43 Control  :HeidenHain TNC 426 YOP      :1997 X-Axis    4.300 mm Y-Axis     1.200 mm Z-Axis     1.500 mm Table Length      6.000 mm Table Width       1.000 mm Table load         10,000 kg Power on spindle        25 kW Spindle speeds         3000 Rpm Spindle Taper          50 ISO/Bt/Mk Feed rate X-Axis      15,000 mm Feed rate Y-Axis      15,000 mm Feed rate Z ...

10.25 bar, water cooled, with built-in at compressed air refrigerant dryer, variable speed drive.

Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Screw compressor - see pictures

Convotherm Hot air damper OES6.06 Table unit, capacity:6 x 2/3 GN flexible Bays:7 x GN1/1 or 14 x GN1/2 with memory for 250 recipes. Crisp&Tasty Disappears ür chrome nickel steel. Connection value: 11.4 KW New price:5.250,-€

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Combination damper Convotherm OSP6.10 in a very good used and functional condition. 6 bays 1/1 GN, door with lateral sliding function (inchVerschwindetürinch), core temperature sensor, effervescent, electronic control and much more. 3 x in stock. Dimensions W/D/H 103/80/70 cm. Connection values 400 volts, 9-11 kW. Workshop-tested, ready for immediate use. More on request.

Hours: 37.0000 YOM: 2009 Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.

Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 79.6 m3/min.

2 x Atlas Copco refrigerant dryer FD1600WFS 96 m3/min

Notching machine make COMACA type N 225 EPAS 4Machine -No: 2612Technical specifications:Knife length 225 mmMax. Sheet metal thickness 42 kg, strength 4.0 mmMax. Sheet thickness 70 kg / VA 3.0 mmfixed cutting angle 90 °Projection 110 mmStrokes per minute 45Cutting capacity 10 tTable size 1050 x 800 mmDrive power 4.0 PSWeight approx. 700 kgWith- inner depth stop- foot switch- 2 adjustable angle stops- without pneumatic automatic stopused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Oil-free. Water cooled. Variable speed drive. Volume flow 5.94 - 13.92 m3/min at 7.0 bar. New LP and HP air ends in 2012 and have 25000 working hours. Engine had been overhaulded.

37 kW, 10 bar, new mineral oil and oil separator.

Sanitary container, m/w, 10 feet (3m) We rent and sell storage containers, sea containers, construction containers, overseas containers, office container dupplants. Offer with transport possible-ask us. Sample pictures-viewing by appointment possible. Please also note our other offers.

Storage container "Moverbox," 5 feet (1.5m) We rent and sell storage containers, sea containers, construction containers, overseas containers, office container dupplants. Offer with transport possible-ask us. Sample pictures-viewing by appointment possible. Please also note our other offers.

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

Combination steamer Convotherm OES 6.10, built in 2011, in a very good used and functional condition. Can be used for cooking, frying, baking, regenerating etc. 6 inserts 1/1 GN, injection, rinse shower, door with lateral sliding function (inchVerschwindetürinch), programmable. Dimensions W/D/H 95/90/150 cm. Connection values 400 volts, 11.4 kW. Workshop-tested, ready for immediate use. More on request.

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

Cobot collaborative robot Dobot CR10 new - with Safeskin Reach: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, gr ...

Atlas Copco used machine power: 110 kW volume flow: 20,4 m3/min pressure: 8,5 bar 2007 year

CompAir used machine power: 250 kW volume flow: 42,7 m3/min pressure: 7,5 bar 2006 year

CompAir used machine power: 160 kW volume flow: 28,4 m3/min pressure: 7,5 bar 2002 year

CosteC used rinse 18 pliers Speed: 5,000 bph Year: 2001 Sense of travel: time. Double treatment. Mobile ugello. Safety protections. CODE: UW 18.

CompAir used machine power: 90 kW volume flow: 12,6 m3/min pressure: 13 bar 2001 year

CompAir used machine power: 90 kW volume flow: 14,4 m3/min pressure: 10 bar 1991 year

Atlas Copco GA45VSDFF used machine power: 45 kW volume flow: 8,71 m3/min pressure: 12,8 bar 2008 year

Dryer coolerOTW 150 never used.., For cereal flakes, seeds of any type...for extruded products... never used with fan, cyclone... in perfect working order for extruded products, cereal flakes... and many many other products can dry or cool both functions with steam drying battery Enquiries welcome. Also a CROIX single screw extruder, 75KW 4/6 barrels suitable for pet food, full fat soya .. and many other purposes Visible in Brittany- France

Rental of compressed air screw compressors oil-flooded and oil-free up to 500kW, as well as compressed air caelte dryer sat ready for immediate delivery.

With built-in compressed air refrigerant dryer. Refrigerant R 404a.

Variable speed drive. Volume flow 1.9 - 17.07 m3/min. at 7.0 bar.

Atlas Copco used machine power: 15 KW volume flow: 2,18 m3/min. pressure: 9,8 bar 2008 year

Atlas Copco used machine power: 75KW volume flow: 14,68 pressure: 13 bar

Atlas Copco used machine power: 55 KW volume flow: 9,72 m3/min. pressure: 12,8 bar 2006 year

Atlas Copco used machine power: 45 KW volume flow: 7,2 m3/min. pressure: 9,8 bar 2006 year

Atlas Copco used machine power: 50 KW volume flow: 9,18 pressure: 13 bar 2004 year

Atlas Copco paket 5 x GA160 used machine power160 KW pressure :7.5 bar 2000 year

Compressor Copeland Type: ZP385KCE-TWD524 Volume: 61 m3/h Cooling capacity: 66 kW at -5°C/40°C, 54 kW at -10°C/40°C, 35 kW at -20°C/40°C R404A Quantities in stock: 2 Reference number: S54 Condition: Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Atlas Copco used machine power: 90KW volume flow:15,65m3/min pressure:7,8 bar

Compressor Copeland Type: ZP295KCE-TWD-524 Volume: 46.7 m3/h Cooling capacity: 51 kW at -5°C/40°C, 42 kW at -10°C/40°C, 27.5 kW at -20°C/40°C R404A Quantities in stock: 2 Reference number: S55 Condition: Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Cooling compressor, Cooling compressors, Double compressor, Tandem compressors Manufacturer: DWM Copeland Type: DR6J1-4000-EWM Built: 1989 Condition: Used Weight: approx. 450 kg For more data, see also the photos All information without guarantee

Atlas Copco GA55 VSD FF power:55KW volume flow:10,3 m3/min pressure:12,8 bar year : 2008

Atlas Copco used machine power:45 KW volume flow: 7,26m3/min pressure:7,8 bar year:2008

Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.

Pressure air compressor, make CompAir / Geveke, type: VMD 750, for 735 rpm, 8.5 bar, built 1991.