127,272 used machines on RESALE, but how to find them? Machine Search
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding machine for curved elements OMAB/Comec Working width 200mm Sanding belt oscillation Pneumatic pressure of the material Main Motor 5.5kw Feed motor 0.25kw Extraction spigots 2x100mm Machine dimensions 210x80x150cmH Weight 450kg
Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm
Used Forming and Filling Machine RHEON, Type: Cornucopia KN-550 - Up to 100 product data can be stored - Product weight: 10 - 300g - Ratio between product weight and filling is freely selectable - Machine technically checked and cleaned - Condition: Used, ready to use Visits and test runs are possible by arrangement. An overhaul of the entire machine with warranty is also possible.
Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
84 sets, pallet attachment type 65, Cordes, ideal for stacking goods on Euro pallets – used- : Price for complete acceptance ex site: now only 4.950.-€ instead of 6.950.-€ (net)! Only 59.-€ (net) / piece! Manufacturer: Cordes Type: Pallet attachment type 65 Year of manufacture: unknown With hook connection for pallet dimensions 1200 x 800mm Effective depth; 800mm 800mm high 800mm wide Payload: 1,500kg Own weight per set approx. 22kg 4 stacking plates for safe stacking folding Original price: approx. 150.-€ Condition: very good Available: immediately Location: 74080 Heilbronn
sheet width - max.: 0360 mm coil weight: 3,00 t coil internal dia.: 380 - 520 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: 1,40 t dimensions of the machine ca.: 1,80 x 1,80 x 1,70 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
In good condition CO2 installation & cold room build in 2021. Cold room temperature +-4°C and a evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and a isolation value of RC 5,21. Further the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machineset and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a low-temperature Bitzer 2HSL-3K-40S & medium-temperature Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a D ...
Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25
SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh
Stock# U2435-1 Used stainless steel ribbon mixer made by Consumasz (Poland) type M-01 with total volume 1100 l and working volume 850 l. Mixing chamber has internal dimensions: L 1990 mm W 830 mm x D 1175 mm. Mixer is feeded from the top via cylindrical sifter type PC-400, driven by gearbox and el motor 4 kW, 1445 rpm, 220/380 V, 50 hz, or directly through inlet 205 mm x 205 mm. Mixer has single shaft equipped with welded double ribbons. Shaft is driven via gearbox and el motor 15 kW, 1460 rpm, 380 V, 50 hz. Gearbox reduction i= 36,9. Working rotation of shaft up to 39 rpm. Mixer has side wall inspection manway with dimensions 540 mm x 365 mm, and bolted stainless steel lid. Central bottom discharge outlet has diameter 200 mm and is equipped with manually operated valve. Product is droped into the hopper of discharge screw conveyor with screw diameter 200 mm and working length 1000 m ...
Key data: 10000 , 3950 , 2500
Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.
AUTOMATIC COLOUR INKING MIXING KITCHEN 31 colors; for TEXTILE INDUSTRY : MAKE : TERMOCOLOR TYPE : ROT YOC : 2003 , refurbished 2012 VALVES : 6 THICKENER & 31 COLOUR, NO. OF VESSELS : 6 COMPUTERISED COLOUR DISPENSING SYSTEM & WEIGHING WITH DRUM TRANSPORTATION & STORAGE
Corazza/IMA MD120 portion packer. Machine for dosing and wrapping mini portions of butter and bouillon cubes in rectangular packs. - Capacity 5400 p/hr - Current pack size 31x23x11 --> Conversion to other pack size possible - Yom. 1991. - Factory overhaul by IMA 2016. Only 13 running hours since the overhaul. - Paper feed and positioning controlled by photocell - Butter feed by stainless steel funnel with stainless steel auger. - Fully guarded with Lexan doors and windows. (Acc EC regulations.) - Including documentation en EC conformity declaration. - A fully automatic collecting and stacking device in multiple layer configuration can be added. - This machine is basically the similar to the Benhil 8304 As new condition Please contact us for more information, the machine can be seen by appointment.
used weigher Kemper Consul-ET, in bakery condition, checked and tested, works perfectly, No. 680454, 16 A, 400 V, 50 Hz
Bought new in 2019 and only used for a short time in meat-free facility. Can be used for diverse applications such as chopping, flake cutting, granulating, pureeing, and emulsifying. These applications include rework of bakery items, beef/poultry/seafood and by-products, and vegetables/fruits.
Key data: 22 mm, 900 , 850
Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
SPECIFICATIONS: Processing width: max. 1400 mm 2 adjustable speeds Motor 1: 30 kW Motor 2: 22 kW COMPOSITION: Group I: Steel roller Ø 400 mm Group II: 2 steel rollers of Ø 130 mm each
used All-Purpose Oven Stone Slabs Oven Electric by Miwe Model Condo CO 4.1208 from 2018 tested and cleaned in stock immediately available for sale. The stove is with 4 floors each 120x80cm with exhaust hood including fan. - 4 shelves each 120x80cm - Each floor can be controlled separately - Top and bottom heat can be controlled separately - With exhaust hood - Floor entrance height 3 pieces 17cm and one shelf 20cm - Connected load: 28.7 kW - Year of construction 2018 Dimensions Width: 150cm Depth without hood: 133cm, with hood 173cm Height without hood: 194cm, with hood 213cm
COMAP packaging press mod. SC-10 - CE compliant - used - Parcel dimensions H 750 mm W 1000 mm D 700 mm - Strength Kgf 1000 - Loading width: 1000 mm. - Loading depth: 700 mm. - Loading height : 1390 mm. - Complete with manual - Year 1996
PESTER SHRINK-OVERWRAPPING MACHINE WITH HEAT-SHRINK TUNNEL, MODELS PEWO-PACK 250 COMPACT + PEWO-THERM III 450E Year of construction: 2007 The machine applies heat-shrink film (film material: polyethylene) around each package for packaging. Safety is ensured by locking devices. The parameters for products and format changes are stored, and are easily repeatable. COMPOSED OF PEWO-PACK 250 COMPACT WRAPPING MACHINE Year of construction: 2007 compact and ergonomic machine with cantilever design state-of-the-art sealing technology for secure packages patented splicer for fully automatic film reel change, without machine downtime PRODUCTION FEATURES Production: up to 60 packages/min. Min. format folding boxes: 30 x 15 x 60 mm [l x w x h] packages: 60 x 30 x 60 mm [L x W x H] Max. format folding boxes: 150 x 90 x 180 mm [l x w x h] packages: 360 x 180 x 25 ...
Key data: 1400 mm, 1750 mm, 1500 mm
CNC Carousel Lathe with Tool Changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/Retrofit Siemens 828D (retrofit) Face plate diameter: 1,400 mm Face plate loading: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger inlet hole: min. 340 mm Number of plungers: 1 Plunger transverse travel : X 1,900 (+/- 950) mm Plunger perpendicular travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverses: X,Z 8,000 mm/min Transverse beam perpendicular travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm Gear level: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on face plate: max. 40,000 Nm Automatic ...
PESTER OVERWRAPPING MACHINE, MODEL PEWO-FOLD 1 COMPACT Features: In-feed conveyor Stacking Device (Stacking Stroke) Out-feed Conveyor with 90° curve Additional Out-feed Conveyor, 90° to the Machine Can also be used as a Banding Machine Control System: PLC: SCHNEIDER Type: Pac Drive LMC Performance: Output: 60 bundles/min
Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW
KRONES Contiroll fully modernized in 2024, bottle in and out on one side, Warranty -24 months
Comprimo B.V. / Shell Diisopropanolamin (DIPA) Regeneration (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Regeneration of DIPA and stripping of H2S for further processing in the Claus Units. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput DIPA Regeneration max. 1112 t/d (DIPA with 2,79m% H2S load) Operational operating temperature = 102 to 106°C (max. 160°C) Operational operating pressure = 0,5 to 0,8 bar (max. 6,0 bar) 2015 – Complete CUI Program on main column (new coating and insulation) 2022 – Decommissioning
Amrit Cook and Quench 2017, Stainless, Four tank washing line with cook and quench system, previously used for cooking 500Kg Chickpeas per batch, consists of four washing tanks, elevator conveyor, cook and quench system, discharge table, 3Ph
Conversion kit cylinder head, without thermocouple, new for the G9512 12 cylinder. We sell here a complete conversion kit Liebherr G9512, new for the Liebherr 12 cylinder gas engine. consists of the following items: 12x cylinder head; 3rd version, without thermocouple 10152182 12x cylinder head gasket; G9508/G9512 10118055 72x Cylinder Head Bolt; M18 x 2 x 246, G9512 9080476 24x Cylindrical pin 10470574 12x gasket; intake manifold, G9508/G9512 10118991 36x Six-round screw 10332845 12x Gasket; Exhaust Pipe, G9508/G9512 9078308 12x valve cover gasket; G9508/G9512 9079885 12x O-ring; valve cover, G9508/G9512 7381028 24x Cap Bolt; M12 x 80, G9508/G9512 4043173 2x O-ring; 144.5 x 3.00 7380154 24x sealing ring; 14.7 x 22 x 1.5 10011866 4x Expansion Joint; Exhaust Gas, G9508/9512 10133038 10x clamp; exhaust gas compensator 10144932 Shipping: DHL, DHL Express, freight ...
tool clamping area: - mm Shipping weight: 22 kg Packing: ? mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm
2 color Flexoprinting machine 1650mm Number of printing units: 2 Anilox rollers: ceramic coated Paint application: continuous paint circulation Closed chamber doctor blade system (double squeegee) Materials: Foils and composites Working width: 1650 mm Roll diameter: max. 1000 mm Printing speed:max. 100/150 m/min Print Mode: Roll to Roll (Unwinding and unwinding) Electr. Connected load 48.2 kW
COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...
COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...
maximum number of results exceeded
please refine your search
