cnc used for sale

PCI/ISA-BOX 840D BS003 MMC103: 200 MHZ; 64 MB DRAM; 256 KB CACHE; 6FC5247-0AA02-1AA064

Used machine in good condition. Available for immediate delivery. - Operating hours: 58.000 - Number of index tool stations, max: 21 - Max. workpiece weight: 230 kg - Punching force: 180 kN - Working area max: 3.000 x 1.550 mm - Material thickness (punching) max: 6,4 mm - Power: installed max: 3.3 kW - Dimensions (long x wide x high): 7.644 x 7.666 x 2.200 mm

The Colchester Combi 2000 has been overhauled and is in very good condition. Spindle motor power: 7,500 W Year of Make: 1998

Used machine in good condition. Available for immediate delivery. - Table width L -R: 200 mm - Operating hours: pending - Pressure force: 400 t - Bending length: 6.000 mm - Axes: X-R-Z1-Z2-X - Working area: 0 mm - Distance between uprights: 5.050 mm - Working speed: 11 mm/seg - Returning speed: 120 mm/seg - Throat: 400 mm - Stroke max: 300 mm - Oil tank capacity: 500 l - Power: installed max: 42 kW - Weight: 37.000 kg - Dimensions (long x wide x high): 0 mm

Used machine in good condition. Available for immediate delivery. - Max. workpiece weight: 10.500 kg - Punch diameter max: 89 mm - Axis speed [Y axis] max: 60 m/min - Power supply: 15 kVA - Turret rotation: 24 r/min - Compressed air pressure min: 6 bar - Control type: SIEMENS SINUMERIK 840D - Axis speed [X axis] max: 90 m/min - Number of turret stations (pcs): 20 - Operating hours: 45.248 - Punching force: 200 kN - Working area max: 2.530 x 1.270 mm - Material thickness max: 8 mm - Compressed air consumption max: 5 l/s

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg

General Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2016 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 46,318 h Spindle Spindle speed: 8,000 rpm Spindle Passage: 32 mmin Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Bosch CC 220N 074031 CNC Control Servo Power Supply for Trumpf Laser

Key data: 356 mm, 406 mm, 4000 1/min

Machine Details Stock number 1105-04050 Machine Type: CNC Lathe - Inclined Bed Machine Make HAAS Type SL 15 Year of construction 2019 Condition Control type: CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Price Technical details Turning diameter 356 mm Turning length 406 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circumferential diameter 480 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool Changer 10 VDI Gear stages 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirements approx. 3.3 X 2 X 1.9 H m Information CNC HASS LINING DIA 210 MM SPAENEFOEDERER TAIlSTOCK

Travel: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Speed: 2000rpm, Feed: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC 432 control, Hours: 7077h. Documentation available.

Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i

2 machines one 2003 and 2006 Pakert price 39,900 Circumferential diameter 320 mm Chuck diameter 203 mm Machining diameter 260 - 320 mm Machining length 180 - 530 mm Rod diameter 51 mm Spindle bore 61 mm Spindle speed 35 - 5,000 rpm Number of shots in the turret head 12 x 2 Control MATRIX 2 Travel - x 240 mm Travel - y 100 [+/-50] mm Travel - z1 440 mm Travel - z2 495 mm CNC Turning and Milling Center | MAZAK - MULTIPLEX 6200 IIY equipped with gantry loader

x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 6150 rpm Operating voltage 380 V CNC control heidenhain 425 Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant tank l Total power requirement 13.5 kW Machine weight approx. 3.1 t Dimensions approx. 2.20x2.70x2.35 m Hydraulic tool clamping full 4th axis + 5th axis +45° -20°

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Universal lathe of the Weiler brand suitable for tooling, fixture construction, training and mould making Tip Height : 280mm Speed :48-2500 rpm Tip height : 280 mm Circumferential diameter over bed : 570 mm Circulation diameter over face slide : 340 mm Center width : 1,000 mm Rhqel FULCRUM SHAFT Spindle head DIN 55027/DIN ISO 702-3 : Gr. 8 Spindle bore : 83 mm Spindle diameter in front bearing : 120 mm MAIN DRIVE Drive power 60 %/100 % ED : 15/12 kW Speed range : 1 – 2,500 rpm Number of speeds : infinitely variable FEED RANGE Number : infinitely variable Longitudinal : 0.001 – 10 mm/rev Plan : 0.001 – 10 mm/rev Longitudinal feed force : 10,000 N Feed force plan : 7.000 N Max. longitudinal rapid traverse speed : 6/3 m/min THREADING AREA Metric threads : 0.1 – 400 mm Inch thread : 56 – 1/4 TAILSTOCK Quill ...

Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW

Machine type: Lathe - cycle-controlled Manufacturer: WEILER Type E30 Year of manufacture 1991 Weiler control Country of origin Germany Additional information Cycle-controlled lathe HAMLET - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Circumferential diameter over bed 330 mm Circulation diameter max. via face slide 160 mm Slide travel 180 mm Bed slide longitudinal travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 rpm/-1 Drive power - main spindle 9 / 11 kW Max. torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in the vord. Bearing 70 mm Spindle bore 40 mm Usable rod diameter ( - ) mm Tool carrier: Type MultiFix Turning chisel shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock mount MK 3 Feeds: Rapid traverse max. 10 m/min Fee ...

Inv. Num. : 8070 Type: Multiturn 3000 Producer: Colchester Created: 2005 Parameters: Control system: FANUC Maximum turning diameter over bed: 460 mm Maximum turning diameter over support: 270 mm Spindle diameter: 78 mm Motor power: 11 kW Maximum spindle speed: 2250 1/min Travel X: 296 mm Travel Z: 1530 mm Equipment: Owner Vacuum

Manufacturer: DMG Type: Sprint 42/10 Linear Year of Make: 2014 Technical data working space Max. travel X-axis: 50 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 120 mm Workpiece Max. workpiece diameter: 42 mm Max. workpiece length: 320 mm Max. bar passage: 42 mm Control: Fanuc Basic functions Sub-spindle Y-axis Accessories Bar Feeder Säneförderer Tool Holder Condition Perfect Availability Immediately after payment Terms and conditions of purchase: no guarantee, no warranty, no return Terms of delivery: Ex-works Terms of payment: 100% prepayment

1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL PAA 9001.25 Year of Make: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i 2 oxyfuel burners propane Beuting vibrating conveyor table Donaldson DFPRO12 filter system for outdoor installation

ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...

TRUMPF TruLaser 5030 L68 fiber laser was built in 2017 in Germany by Trumpf GmbH + Co. KG. The machine, designed for precision machining of sheet metal made of structural steel, stainless steel and aluminium, is offered with state-of-the-art components and extensive equipment. These include a resonator with the highest energy efficiency, which generates a stable 3 kW fibre optic beam. The mobile, adaptive lens system located in the universal cutting head ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality at maximum feeds. In addition, special systems incorporated in the machine allow for the machining of waste material. The laser power is regulated analogously to the feed rate on the advanced SIEMENS SINUMERIK 840D SL CNC control. What’s more, the workshop programming integrated into the control system allows program ...

Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg

Key data: 65 mm, 510 mm

12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control

WE SELL AN STUNNING NICE CONDITION CNC BIGLIA WITH TOOLS AND ACCESSORIESS CONDITION IS AS ALMOST NEW. VERY LITLLE USED. FANUC SERIES 18-T Maximum turning diameter: 520 mm Maximum turning length: 500 mm Bar turning diameter: 80mm X axis travel: 210 + 5 Z axis travel: 500 + 10 Spindle speed: 4000 rpm Spindle motor: 11-15 Kw (50%) Spindle connection: ASA 6 Spindle hole: 80 mm Self-centering diameter: 250 mm Turret: number 12 stations Tailstock: CM 4 Dimensions: 3500 x 1670 x 1650 mm Weight: 4600 Kg HOLE TROUGH SPINDLE: 82 mm YEAR:1997

TRUMPF TruLaser 5030 fiber laser was built in 2015 in Germany by Trumpf GmbH + Co. KG. The machine, which is designed for precision machining of sheet metal made of among others structural steel, copper and aluminium, is characterised by the use of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. Laser cutting is performed by means of a stable fibre-optic beam with a maximum power of 5 kW, which is flexibly guided from the resonator to the cutting head with an adaptive lens system. This system ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality, at maximum feed rates. In turn, the laser power is regulated analogously to the feed rate on the intuitive SIEMENS SINUMERIK 840D SL CNC control. The workshop programming integrated into the con ...

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

ZINSER 2425-I plasma cutting machine was built in 2013 in Germany by ZINSER GmbH. The machine, which is designed for precision cutting, marking and bevel cutting of tubes and sheet metal, has AC servo drives with precision planetary gears that guarantee excellent handling characteristics at high speeds and rapid direction changes. For the machining process, plasma or oxy-fuel torches are used, which move along the large work table on two linear guides. A sturdy portal structure with an efficient filtration system further eliminates any contamination, leaving the work area safe and comfortable. All this is complemented by a state-of-the-art CNC control with touchscreen. The ZINSER 2425 plasma cutting machine weighs 1325 kg. Technical parameters of the ZINSER 2425-I plasma cutting machine - CNC controller: ZINSER CNC 5010 - input power: 4000 W - maximum workpiece thickness: 200 mm - ...

Reform Bautz Compact MF60 machining center :::TECHNICAL SPECIFICATIONS::: CNC Model: Selca - CNC Version: 4045PD - Tool Holder: HSK 63 - Spindle Speed: 18000 Number of tools: 99 - X-axis travel: 1380mm - Y-axis travel: 600mm - Z-axis travel: 500mm - Swivel rotary table: yes Swivel rotary table type: continuous Table size: 710 x 710mm Allowable load on the board: 700Kg High refrigerant pressure: yes Chip conveyor: belt Presetting: yes Other technical data: Machine with granite base Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Weight: 12000Kg

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

Working area: 6000 x 1000 x 3000 mm (max stroke) Rotary table: 2000 x 2000 - load capacity: 15000 kg Max working feed: 5000 mm/min Max rapid feed: 8000 mm/min Fixings: ▪ Nose: 3000 rpm ▪ Universal Head: 3000 rpm Control: Selca 3045 PD

RACING Longitudinal travel of the X-axis mast 16,000mm Vertical travel of the Y-axis head 3,000mm Z-axis head transverse travel 1,250mm Cross stroke boring spindle W axis 700mm HEAD DIMENSIONS 410 X 505mm MANDREL Boring spindle diameter 140mm ISO 50 spindle attachment Spindle rotation speed: 5 – 3,000rpm ADVANCES Continuous working axes X, Y, W, Z 0.5 – 6,000mm/min Fast X, Y, Z axes 18,000 mm/min Rapid W axis 10,000mm/min Working thrust 2,000kg ENGINE POWER: Spindle motor in continuous service (S1%) (AC) 42 Kw Axis feed motors (AC) 50 Nm Auxiliary engines 4.5 Kw Machine in excellent condition.

Working Area: 6000 x 1200 x 3000 (Max Stroke) Max working feed: 8000 mm/min Max rapid feed: 15000 mm/min Fixings: ▪ Indexed head : max rpm: 4000 ▪ Nose: max rpm: 4000 Control: Selca 3045

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

OKUMA HOWA Type ACT 4 CNC control Fanuc 10 TF Turning diameter 380 mm Circulation over bed 520 mm Turning length 750 mm Revolver 12 speed Spindle speeds 20 - 3500 rpm Fodder Tailstock Spindle bore 75 mm Feed adjustment by foot switch CAM connector

Technical data and equipment: Travel X/Z - X2/Z2: 270/750 // 205/750 mm Travel Y: 100 (+-50) mm Max. rod diameter: 65 mm Main spindle drive: 0 - 5000 rpm Sub-spindle drive: 0 - 7000 rpm Tool holder: VDI 30 Control: Siemens Sinumerik 840 PL Revolver: 2 pcs. for applied Tools (12 slots each) Turret: Upper turret is equipped with Y-axis Spindle: 2 pcs main and counter spindle with C-axis Accessories for the machine: - Bar feeder Irco Profimat 70.6/270.6 - Internal cooling - Driven tools (straight and angled) - Chuck for main and counter spindle -Suction -Conveyor - Pick-up device with outfeed conveyor - KSS system Knoll SF 1000/Turbo-1 - Various holders approx. 80 pcs VDI 30 - Drill rod holder - Muzzle holder Machine space requirements: 3400 x 2600 x 2300 mm // 7600 kg

Key data: 300 mm, 570 mm, 5000 1/min

Machine Details Stock-No. 1105-04044 Type of machine CNC Lathe Make MAZAK Type QT NEXUS 200 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex work Technical details turning diameter 350 mm turning length 575 mm Diameter bar 76 mm swing dia. 475 mm control Mazatrol Fusion 640 T X-Axis 190 mm Z-AXIS 570 mm total power requirement 26/22 kW weight of the machine approx. 5 t dimensions of the machine approx. 3.4 x 1.8 x 1.9 m Additional information mazatrol fusion 640 t 2 AXIS tool eyes chip convoyer tailstock

max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven

CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t, 10 tool turret tailstock, bar feeder The machine can be seen under power in our warehouse (M i m u)

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T, Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower), 2x C-Axis, Swarf conveyor, IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

turning diameter: 300 mm turning length: 1500 mm control: FanucSystem 6 T total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4x2x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1100 mm turning length: 6000 mm control: Siemens 840D turning diameter over slide: 740 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Die Maschine ist Überholt und hat eine neue Steuerung The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mm turning length: 8500 mm control: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mm speed: 1,12 - 1120 m/min voltage: 480 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Unit, Control Electronics, Numerical Control WMW, VEM VEB NUMERIK CNC - H 645 ( CNC-H645 ) 19623212 4518784 220 V 48 - 62 Hz used ! Dimensions: 550 x 320 x 630 mm