132,141 used machines on RESALE, but how to find them? Machine Search
A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
TSUGAMI B0206E-II Sliding Headstock CNC Lathe TECHNICAL FEATURES: Year: 2014 NC Type: FANUC series 32i-B Number of axes: 6 X1 Axis Fast Feed Speed: 24000 [mm/min] X2 Axis Fast Forward Speed: 24000 [mm/min] Z1 axis fast feed speed: 32000 [mm/min] Z2 axis fast feed speed: 32000 [mm/min] Y1 Axis Fast Feed Speed: 15000 [mm/min] Y2 Axis Fast Feed Speed: 15000 [mm/min] Maximum diameter in bar: 20 [mm] Minimum speed. Spindle: 200 [rpm] Maximum speed Spindle: 10000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Minimum speed. Spindle: 200 [RPM] Maximum speed Spindle: 12000 [rpm] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 2.2 [kW] Number of end device positions: 8 Number of comb positions 1 : 5 Number of motorized comb stations 1 : 3 Comb Turning Tool Speed 1: 8000 [rpm] Number of counter-operation positions: 8 Number of counte ...
Key data: 700 mm, 5050 mm
CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation
Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.
Machining center in vertical design with automatic return Workpiece dimensions: Length: 200 to 3050 mm Width: 50 to 1250 mm Thickness: 8 to 80 mm weight max 60 kg Performance - 2x vertical drilling unit separately controllable with variable speed. right left V10/32mm. 2.3 kW. Drill length 70 mm, D= max 35 mm - 2x horizontal drilling unit, 6 spindles in X direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - 2x horizontal drilling unit, 2 spindles in Y direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - Grooving saw unit X-Y can be swiveled 0?/90? saw diameter 125 mm, rpm 1500-7500 frequency controlled - Dowel insertion station for automatic insertion of dowels on the two transverse workpiece edges 1x left side / 1x right side glue pump, vibrating guide for dowels 8 x 35/40 mm - plau ...
CNC - Universal milling machine HERMLE UWF 902-S -Heidenhain 426 -Built in 1997 -Travel X/Y/Z 600-450-500mm -Speed range 20-6300 rpm -Tool holder SK40 -Vertical - Horizontal milling device -Drill quill -Coolant device -Angle table -Machine enclosure -Documentation Dimensions: LxWxH 3,9x2x2Meter / Weight 4000Kg Hobkn Au Sjv Iklus Tol
Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor
TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel
Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle
Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible.
X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...
CNC press brake Type: APH-S 3106×120 Manufacturer: Baykal Year: 2005 Control: Delem DA 66W (graphical 2D programming) Press force: 120 t Working length: 3100 mm Automatic calculation of the bending sequence and collision detection X-axis rear stop with 2x manually adjustable stop fingers CNC electromotoric rear stop height adjustment (R axis) CNC electrically controlled table deflection ROLLERI upper tool adapter Equipment and accessories: Front protection device (hinged door) Rear protection device (sliding door) 1× freely movable two-handed / foot control User manual including CE declaration Machine in good condition, fully functional, under power Find more here - / Contact us at -
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L8000 Year of Make: 2005 CNC Control: Global Control Plus Track width: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L weld seam preparations (chamfers) 1 x Skew Rotator with Power Source Kjellberg FineFocus 800 3 x oxy-fuel burner ALFA 1 x FineMarker marking unit Without table, filter and running track
CNC vertical machining center Type: ecoMill 600 V Manufacturer: DMG MORI Year: 2016 Control: Siemens SLIMline X: 600 mm Y: 560 mm Z: 510 mm Max spindle speed: 12000 rpm Table: 900 x 560 mm Max table load: 600 kg Tool magazine: 30 positions Machine weight: 5000 kg Tool and work probe Filtration Bürener Preparation for mist extraction Chip conveyor New spindle in 2025 Machine in good condition, fully functional, under power Find more here - / Contact us at -
CNC punching machine Type: OMATIC 130 DTRH Manufacturer: Haco Year: 2014 Control: TPC 69C Graphics Pressing force: 30 t Max. sheet size: 4000 × 1500 mm Max. sheet thickness: 6.5 mm (steel) Positioning accuracy: ±0.05 mm Features and equipment: CNC turret punch Brush work table - sheet metal surface protection Hydraulic clamps High punching speed, also suitable for nibbling Stable construction, reliable industrial operation The machine comes with an extensive set of die-cutting tools in excellent condition Tools intended for black sheet in thicknesses of approx. 0.8 – 3 mm Machine in good condition, under power Find more here - / Contact us at -
Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.
A CNC vertical milling machine Deckel Maho (DMG Mori) is available. Travel path X/Y/Z: 350mm/250mm/340mm, B-axis: 90°, C-axis: 360°, speed: 5000rpm, table dimensions X/Y: approx. 400mm/280mm, max. workpiece weight: 100kg, tool holder: SK40, feed rate: 5m/min. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1600kg, control: Siemens. Documentation available. An on-site inspection is possible.
A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
Key data: 850 mm, 700 mm, 500 mm
Inv. Num. : 8976 Type: C 400 U Producer: Hermle Created: 2015 Parameters: Control system: Heidenhain iTNC 530 Number of stacking positions: 38 Number of axles: 5 pieces X-axis travel: 850 mm Y-axis travel: 700 mm Travel Z axis: 500 mm Cone: SK40 Electric spindle speed: 18000 1/min Spindle cooling: 40 bar Rotary table Ø 650 mm A 91° / -139° C 360° BLUM Tool Measuring System BLUM workpiece probes Direct torque drives in rotary axes Chip conveyor Oil mist extraction Electronic handwheel
Key data: 450 mm, 600 mm, 330 mm
Catalog No. : 8975 Type: C 22 U Producer: Hermle Made in: 2018 Characteristic: Control system: Heidenhain TNC 640 Total hours: 23,000 h Number of stack positions: 192 Number of axis: 5 pcs X-Axis travels: 450 mm Y-Axis travels: 600 mm Z-Axis travels: 330 mm Block speed: 18000 1/min Taper: HSK-A63 Internal cooling: 80 bar Rotary table Ø 320 mm A ±135° / C 360° Hermle IH30/60 handling system (active) BLUM tool measuring system (LC50) BLUM workpiece probe (TC52) Dynamic Precision
12000 mm x 3000mm Year: 2019 Serial: 2082 Burny 10 LCD Plus CNC Control Lincoln Electric Spirit II 400 HD Plasma Inova Automatic Torch Height Control Kerf Bridge (2019) Fitted to ESAB Rail Support Beams and Cutting Table Bridge has a 4000mm Cut Capacity, Currently Sat on 3000mm Wide Bed
Control Siemens 828D - ShopTurn Rotary diameter. [mm] 405 Turning length [mm] 956 Main spindle: Lining SAMCHULLY HS-12 (12 inches) Spindle speed (max.) 3,000 rpm Spindle nose A2-8 Motor power (Cont./Max) 18.5 kW / 26 kW Max. turning Ø x turning length 405 mm x 956 mm Tool carrier (X/Z): Number of tool positions 12x BMT65 Max. milling Ø 433 mm Travel (X/Z) 245 mm / 1,040 mm Rapid traverse (X/Z) 24 m/min / 30 m/min Tailstock: Quill Ø 110 mm Quill stroke 100 mm Equipment/accessories: Control SIEMENS 828D - ShopTurn Bed construction 45° inclined bed (cast from one piece) Additional equipment Tool Probe (Tool Setter, swivel) Collision protection turret with Hirth serration Weight 5,600 kg (according to configuration nameplate) Chip Management Chip Conveyor Electrical connection 380 V / 3PH. PE / 50/60 Hz / 42 kVA
CNC turning and milling center Okuma Multus B300II-W Control: OSP-P 300SA Year of Make: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis with stroke: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40-fold Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. pump 20 bar - Preparation for in-process measurement - Tool height correction in Y-axis for turning tools - Hi-Cut Pro high-speed control
To mediate on behalf of the customer. Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32 Manufacturer: Gildemeister Control: Fanuc 160iB First commissioning: 2003 #009328 Location: Poland Control Fanuc 160i-B Turning length 120 mm Turning diameter 32 mm Number of axes 8 Travel X1 axis 65 mm Travel Y1 axis 350 mm Travel Z1 axis 120 mm Travel X2 axis 265 mm Travel Y2 axis 235 mm Travel Z2 axis 320 mm C1-axis travel 360° Travel C2 axis 360° Spindle bore 42 mm Spindle speed 8000 rpm Motor power 7.5 kW Total power requirement 34 kVA Dimensions L 4900 x W 1630 x H 1920 mm Weight 4350 kg The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine.
Key data: 165 kN, 6 mm, 1250 mm
The machine was purchased directly from Trumpf in 2015. It was a demonstration machine from 2012, which had previously been used in the Trumpf training workshop (there only a few operating hours). Later, it was used in single-shift operation in the housing production of welding machines. Therefore, only 15700 operating hours. Exclusively in the sheet metal sector, especially sheet steel 1.25 and 2.0mm, occasionally 3mm. No stronger material. No known defects, machine is currently still in use, available from May 26. Reason for sale: Discontinuation of production. The "Compact Edition" of the TP1000 is optimized for a part size of 1250x1250. Larger formats can be done with the "Reset" function, additional tables are necessary. The outstanding advantage of the "Compact" machine is the small space requirement of only 4.13 x 5.84 m. The machine is equipped with almost all availab ...
Key data: 254 mm, 700 mm
Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition
The machine is in good technical condition, after prior agreement it is possible to test it. with Fanuc Oi-TC control and accessories. - maximum turning diameter: 500 mm - maximum turning length: 1200 mm - clamping head 100 mm - swing diameter over the bed: approx. 700 mm - max. spindle passage bar diameter: approx. (75-105 mm) - chuck size: 15" - LM driven tools with milling function (C axis), driven tool motor 7 hp - spindle motor 30 hp - number of tools in the turret 12 VDI - 3-jaw chuck - chip conveyor
CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Travel X: 2000 mm Travel Y: 800 mm Travel Z: 800 mm Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Weight: 9 T
Travel distance: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 1/min Dimensions LxWxH: 2500 x 2200 x 2200 mm Weight: approx. 3,000 kg
AMADA LCG 3015 AJ fiber laser was built in 2016 in Japan by Amada Co., Ltd. It is an extremely versatile machine designed for precision machining of a wide range of materials, i.e. structural steel, stainless steel, aluminium, brass and copper. It is distinguished by the use of state-of-the-art components and a robust design that maintains stability during even the most demanding challenges. The sheet metal cutting process is performed by means of fibre optic technology, which offers many advantages over traditional cutting methods. The use of this technology in production makes it possible to quickly cut complex shapes with the highest precision and accuracy. It is also distinguished by its high energy efficiency, which results in lower energy consumption and a significant reduction in operating costs. The AMADA LCG-3015 AJ is equipped with a reliable cutting head with an efficien ...
HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...
HAAS ST-30 CNC lathe was built in 2018 in the United States by HAAS AUTOMATION, INC. The machine on offer is an excellent choice for both unit and series production. It is capable of performing a number of complex operations, i.e. precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, reaches a maximum speed of 3400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. Tools taken from the 12-position turret are continuously measured and calibrated to guarantee maximum machining precision. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 is distinguished by its compact design, engineered with extreme rigidity and ...
5-axis cnc machining center Type: UMC-750 Manufacturer: Haas Year: 2022 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine 30+1 positions Spindel taper: ISO 40 The distance between the tip of the spindle and the table (~ max) 610 mm Distance between spindle tip and table (~ min) 102 mm Maximum weight on the table (evenly distributed) 300 kg 25 micron filter Chip conveyor Spindle center cooling pressure 300 psi Wireless tool and workpiece probe Synchronized threading Rotating measuring ruler Machine in good condition, under power. Find more here - / Contact us at -
A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.
The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400
Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.
A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.
Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
CNC vertical milling machine Type: FBE-4000 Producer: Eumach Year: 2013 Control: Fanuc Series 31i-MB X: 4000 mm Y: 1000 mm Z: 1500 mm Tool magazine: 24 positions Spindle cone: ISO 50 Work area: 1050 x 4100 mm Max table load: 9000 kg Power on spindle: 22/26 KW Spindle speed: 5000 rpm Manual rotating head, speed 3500 rpm Cooling through the center of the spindle Folding the tool tray outside the table area - next to the stand on the left Chip conveyor Work probe OMP-60 Tool probe TS-27 R Machine Weight: 22500 kg Machine in good condition, fully functional Find more here - / Contact us at -
CNC verical machining center Type: DMC 835 V Manufacturer: Deckel Maho Year: 2006 Control: Heidenhain iTNC 530 Total hours: 20,579 Spindle hours: 6,598 X: 835 mm Y: 510 mm Z: 510 mm Tool magazine: 20 positions Spindle cone: SK 40 Chip conveyor Accessories: weldon holders collet clamps, about 40 pcs vihorlat 160 vices 2 pcs other vices, clamps, washers Machine in good condition, under power Find more here - / Contact us at -
A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible.
An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.
maximum number of results exceeded
please refine your search
