cnc work centre used for sale

A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible.

A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.

A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible.

Control Mazatrol T-Plus Max. turning diameter 470 mm Max. swing diameter 575 mm Turning length 1,500 mm Spindle speed 3,000 min-1 Magazine for 40 Wkzg. (KM 63/SK 40) B-axis Y-axis Bezel Tailstock Chip conveyor

Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible.

Horizontal BAZ DMG MORI NHX 4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar Chip conveyor Renishaw 3D - Pushbutton

Key data: 800 mm, 650 mm, 550 mm

Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little

Horizontal machining center Okuma MB 500H with 2-fold pallet changer Year of Make: 2005 Control: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 min-1 Drive power: 26 KW Tool holder: BT 40 Number of magazine slots: 60 IKZ: 70 bar Routes: X-axis: 800mm Y-axis: 800mm Z-axis: 800mm 4th axis: index 1° Number of pallets: 2 Pallet size: 500x500mm Accessories: - Coolant system type ConSep 2000 from Mayfran - Chip conveyor Mayfran type ConSep from Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

Key data: 340 mm, 1170 mm

CNC turning/milling center Gildemeister CTX Beta 1250 4A with Sinumerik 840D Shopturn Year of Make: 2012 Program running hours: approx. 20,000h INTERLOCKING OPTION UNLOCKED Technical data: Main spindle speed: Drive power: 32 KW ISM 102 Speed of sub-spindle: Drive power: ISM 76 Y-axis carriage 1 Driven tools 1x12 on slide 1+2 Bar Feeder Package Workpiece pick-up gripper can be used on main and counter spindle Coolant system Chip conveyor Short Bar Loader IRCO MUK

gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2

A CNC vertical machining center Fadal with increased torque is available. Travel X/Y/Z: 1140mm/635mm/61mm, table dimensions X/Y: 1350mm/635mm, rapid traverse X/Y: 25m/min, rapid traverse Z: 17m/min, max. feed rate: 15m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.0015mm, spindle speed: 10000rpm, tool interface: SK40, max. spindle torque: approx. 360Nm, tool stations: 24. Machine dimensions X/Y/Z: approx. 3300mm/2600mm/3050mm, weight: approx. 6000kg, control: Siemens. Documentation available. On site inspection is possible.

Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible.

Key data: 20 mm, 205 mm

Star ECAS 20 CNC Swiss Automatic Lathe CNC control Star NICS (Yaskawa-Siemens 840DI) Turning diameter 20 mm Turning length 205 mm Spindle diameter 20 mm Spindle speed 500-10,000 rpm Spindle motor 3.7/2.2 kW Min. indexing C-axis main spindle 0.001° Min. indexing C-axis subspindle 0.001° Number of tools on the tower 16x Spindle torsion driven tools 8,000 rpm FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Pressing force: 100 t Table length: 3000 mm Table width: 180 mm Passage between racks: electric motor: 10 kW Dimensions lxwxh: 3200x1450x2950 mm Weight: 8,000 kg In good condition, connected with the possibility of testing.

The machine is in good technical condition, testing possible after prior agreement. Force (kN) 250 Bending length (mm) 1200 Distance between verticals (mm) 1250 Stroke (mm) 200 Entry without tools (mm) 440 Throat (mm) 120 Consumption (kVA) 9.4 Approach speed (mm/s) 120 Working speed (mm/s) 10 Return speed (mm/s) 150 Stroke - X axis of the back gauge (mm) 625 Speed - X axis of the back gauge (mm/s) 600 Stroke - R axis of the back gauge (mm) 200 Speed - R axis of the back gauge (mm/s) 200 Standard dimensions (L x W x H) (mm) 2200 x 1600 x 2320 Weight (kg) 3450

Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm

Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions X/Y: approx. 1270mm/610mm, max. table load: 1100kg, spindle power: 18kW, feed rate: 7600mm/min, rapid traverse: 30m/min, tool positions: 24, tool holder: SK40, speed: 12000rpm, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, weight: approx. 6700kg, control: Hurco Ultimax 4. Documentation available. On site inspection is possible.

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

Laser: CO2, laser source: Convergent Lasers CP 3000, working dimensions X/Y/Z: 3065mm/1500mm/150mm, max. traverse speed: 140m/min, positioning accuracy: +/-0.03mm, repeatability: +/-0.03mm, max. cutting capacity steel/stainless steel/aluminum: 20mm/12mm/8mm. Machine dimensions X/Y/Z: approx. 10600mm/3550mm/2500mm, weight: approx. 10000kg, control: Primach-20L, laser hours: 56739h. Including extraction system. Documentation available. On-site inspection is possible.

Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.

CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock

Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993

CNC lathe Okuma LU 3000 EX-M 2PC-600 Control: OSP-P300L Year of Make: 2017 Turning length: 600 mm Turning diameter: 340 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (all places driven) B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system - Tool measuring device - Reinforced coolant pump 8 bar - 3- Baking Chuck Kitagawa B208

Travel X/Y/Z: 600mm/400mm/420mm, feed rate X/Y/Z: 6m/min, rapid traverse: 6m/min, spindle power: 8kW, speed: 4500rpm, quill stroke: 75mm, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 2800mm/2200mm/2100mm, weight: approx. 2800kg, control: Heidenhain 415B, hours: approx. 56193h. Includes cooling lubricant system and 3D measuring probe. The brake of the Z axis is to be replaced. Documentation available. An on-site inspection is possible.

5-axis two-spindle center with pseudo-palletization Type: DZ 24 Magnum Manufacturer: Chiron Year: 2015 Hours: 57000 Control: Siemens Sinumerik 840 D Table clamping surface 2X D 500 mm X: 830 mm Y: 630 mm Z: 630 mm A: rotating drum C: rotary tables Spindle speed: 0 - 20000 rpm Number of controlled axes: 5 No central cooling Spindle clamping cone: HSK-A63 Tool magazine: 2 x 30 positions Machine weight: 18500 kg Dimensions: 7000 x 3200 x 3500 mm BLUM aiming laser probe Chip conveyor Find more here - / Contact us at -

The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.

Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible.

Key data: 65 mm, 660 mm

Control: SIEMENS Spindle passage: 65 mm Max. speed: 6,000 1/min Sub-spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 1/min B-axis 360° 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 230 / Y= +- 65 / Z= 845 TOOL CARRIER 2 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 140 / Y= +- 45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

The machine is in good technical condition, testing is possible by prior arrangement.

CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2003 Control: Heidenhain TNC 530 X: 810 mm Y: 650 mm Z: 650 mm Table: 1250 x 710 mm Magazine for 30 tools SK40 clamping and tools Internal cooling through the spindle center 40bar External emulsion tank with separator 600l. Max spindle speed 12000 rpm Ethernet interface for networking the machine Internal/external air pressure cooling New motherboard with SSD - the machine loads programs quickly and can use rapid traverse machining New spindle in 8/2023, from exchange 300 hours Find more here - / Contact us at -

CNC vertical machining center Type: DMU 80 T Manufacturer: Deckel Maho Year: 2002 Control: Heidenhain TNC 430 X: 900 mm Y: 650 mm Z: 600 mm Spindle speed: 8000 rpm Spindle taper: SK40 Tilting spindle, can be folded and used as a horizontal boring machine Table: 1100 x 650 mm Tool magazine: 24 positions Through spindle cooling 40 bar Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -

CNC lathe Type: GA-360 LM Manufacturer: Goodway Year: 2005 Control: Fanuc Series Oi-TC Max turning diameter: 500 mm Max turning length: 1200 mm Clamping head: 100 mm Swing over bed: 700 mm Spindle bore: 75-105 mm Chuck size: 15" LM driven tools with milling function (C-axis) Driven tool motor: 7 hp Spindle motor: 30 hp Revolver head: 12 VDI 3-jaw chuck Chip conveyor Tailstock Machine in good condition, under power Find more here - / Contact us at -

Fiber laser cutting machine Type: G 3015 MF Manufacturer: Hans Year: 2018 CNC control: Hans 701 Pro Exchange tables 3 m x 1.5 m X: 3050 mm Y: 1530 mm Z: 250 mm Laser source: IPG 3000 W Laser type: Fiber Laser head: Precitec Machine weight: 8,000 kg Max. workpiece weight: 750 kg Sheet metal cutting thickness: steel 15 mm stainless steel 10 mm aluminum 6 mm brass 5 mm Machine in good condition, under power Find more here - / Contact us at -

MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools

The machine is in good technical condition, testing is possible by prior arrangement.

CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package

This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.

A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.

Used HERMLE UWF 1202 S Universal Tool Barrel and Drilling Machine CNC control HEIDENHAIN TNC 426 Technical data: Travels X-axis 850.0 mm Y-axis 630.0 mm Z-axis 500.0 mm Rapid traverse 10 m/min Table length 1200.0 mm Table width 550.0 mm Max. spindle speeds 20 - 4200 rpm Spindle motor power 7.0 kW Tool holder SK 40 Coolant 120 liters Total connection 16 KW Dimensions 3.3 x 2.4 x 2.4 m Space requirement 5.0 x 4.2 m See still under power

CNC vertical machining center Type: MAG CFV-1300i Manufacturer: Cincinnati Year: 2010 Control: Heidenhain TNC 530 X: 1300 mm Y: 540 mm Z: 720 mm Maximum table load: 1000 kg Max spindle speed: 9000 rpm Tool magazine: 24 positions Internal cooling Chip conveyor 4 pcs hydraulic vices Tool holders SK40 approx. 24 pcs New spindle In good condition, under power Find more here - / Contact us at -

Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad  ...

CNC vertical machining center Type: Vesta-1000 Manufacturer: Hwacheon Year: 2016 Control: Fanuc Series 0i-MD X: 1000 mm Y: 550 mm Z: 500 mm Distance table-spindle: 130 – 630 mm Working surface: 1100 × 502 mm Table load capacity: 700 kg Spindle speed: 12000 rpm Rapid traverse (X / Y / Z) m/min 36 / 36 / 30 Working feed (X / Y / Z) mm/min 1 – 24,000 Feed motor (X / Y / Z) kW 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Tool changer: 24 positions Cooling through the center of the tool 30 bar Power consumption: 30 kVA Coolant tank capacity: 380 l Chip conveyor 4th axis TSUDAKOMA Wireless workpiece probe + tool probe. Dimensions:3335 × 2200 x 2670 mm Weight: 6500 kg Machine in good condition, under power Find more here - / Contact us at -

Offered is a Traub TND 400. Center distance: 800mm, turning diameter approx. 250mm, travel X/Y approx. 220mm/850mm, spindle bore: 65mm, speed range: 40-4000rpm, 12-position disc turret, tool holder: VDI40 DIN69880, integrated coolant system, dimensions X/Y/Z approx. 3000mm/2000mm/2000mm, weight approx. 4300kg-4500kg. Inspection by appointment possible.

Key data: 3000 mm, 4000 mm, 1500 mm

Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.

CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg

TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg

EUMACH MC 1050 P vertical machining center -CE marking -Built in 1999 -Heidenhain 426 -Fourth axis NIKKEN CNC 170 ZA / programmable directly from the controller -Oil cooler -Complete documentation -COMPLETE TECHNICAL DATA - SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500Kg