cnc work centre used for sale

This 4-axis DECKEL MAHO DMC 63 H was manufactured in 2002. A robust horizontal machining center, it features an installation weight of 18 tons and dimensions of 6.6m x 6m x 3.2m. Currently, the system does not boot up, displaying an error message with no other known damage. Consider the opportunity to buy this DECKEL MAHO DMC 63 H horizontal machining center. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DC 100V was manufactured in 1995. It features a Siemens 840D control, a machine table of 1250 x 800mm, and travels of 970 x 755 x 490mm in X, Y, Z axes. With a maximum speed of 18,000 rpm and 24 tool positions, this vertical machining centre is still in production. Consider the opportunity to buy this DECKEL MAHO DC 100V vertical machining centre. Contact us for more information.

This 4-axis CHIRON DZ15KWM HS was manufactured in 2011. Ideal for precision vertical machining, this model offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the CHIRON DZ15KWM HS machine we have for sale. Contact us for more information.

This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine.

The machine is in good technical condition, testing is possible by prior arrangement.

This 3-axis HAAS VF-5/50XT was manufactured in 2012, designed for robust vertical machining. It operates on a voltage of 360/480, with a 3-phase power supply and a frequency range of 50/60 Hz. The machine handles a full load of 45 amps and a largest load of 70 amps. If you are looking to get high-quality milling capabilities, consider the HAAS VF-5/50XT machine we have for sale. Contact us for more information.

This 4-axis Enshu Je30S was manufactured in 2008. A robust horizontal machining centre, it offers reliable performance for precision engineering tasks. If you are looking to get high-quality milling capabilities, consider the Enshu Je30S machine we have for sale. Contact us for more information about this machine.

This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information.

This 4-axis Okuma MX-45 VAE vertical machining center was manufactured in 2001. It features a table size of 1000 x 430 mm, X-axis travel of 762 mm, Y-axis travel of 460 mm, Z-axis travel of 450 mm, and a BT40 spindle with 7000 rpm. It also includes a 50-pot chain magazine and a high-pressure coolant system. For more information about this vertical machining center, please reach out to us.

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine.

This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information.

This 3-axis MIKRON VCE 1000 Pro-X was manufactured in 2007. A vertical machining centre featuring a Heidenhain CNC control and a 24-tool changer, ideal for diverse and complex machining tasks. A robust choice for precision engineering. Contact us for further details regarding this vertical machining centre.

This 3-axis Victor Vcenter P106 was manufactured in 2023. It features a Heidenhain 620 CNC, a spindle speed of up to 12,000 rpm, and a tool changer with a 30-tool capacity. The machine offers a robust one-piece Meehanite cast iron base and column, optimized for stiffness and vibration damping. If you are looking to get high-quality milling capabilities, consider the Victor Vcenter P106 machine we have for sale. Contact us for more information.

This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information.

This 4-axis MORI SEIKI NH-5000 40 was manufactured in 2003, featuring a robust horizontal machining centre with a spindle speed up to 20,000 rpm and a power range of 22-30 kW. It includes a versatile tool magazine with a capacity up to 180 tools and a dual-pallet automatic changer to enhance productivity. Pallet size is 500 × 500 mm, supporting a maximum workpiece height of 1,000 mm. Consider the opportunity to buy this MORI SEIKI NH-5000 40 horizontal machining centre. Contact us for more information.

This 5-axis DECKEL MAHO DMC 60T was manufactured in 2004, featuring a Heidenhain iTNC 530 control unit and a spindle speed of up to 12,000 rpm. It includes a pallet changer with 2 pallets, a chip conveyor, and external workpiece cooling. Ideal for complex machining tasks, the DECKEL MAHO DMC 60T machine we have for sale is a robust addition to any workshop. Contact us for further details regarding this Machining Center.

This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine.

This 4-axis HULLER HILLE NBH 230 horizontal machining center was manufactured in 2009. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this HULLER HILLE NBH 230 horizontal machining center. Contact us for more information.

This KUNZMANN WF4/3 universal milling machine was manufactured in 1998. It features a clamping surface of 650 x 350 mm, a maximum load capacity of 250 kg, and a tool holder SK40. Speed ranges from 40 to 2500 rpm with a quill stroke of 60 mm. The machine includes a control cabinet and weighs approximately 1300 kg. Ideal for precise milling applications. Reach out for more information about this machine.

This 3-axis Hurco BMC 2416 vertical machining center was manufactured in 2000. It features a robust Ultimax control system, a spindle speed of up to 8000 rpm, and rapid traverse rates reaching 24003 mm/min. With a tool magazine of 24 positions and generous travels in X, Y, and Z dimensions (610, 406, 540 mm respectively), consider the opportunity to buy this Hurco BMC 2416 vertical machining center. Contact us for more information about this machine.

This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine.

This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information.

Manufacturer DMG Model DMU 50 eVo linear Year 2008 3D CNC control HEIDENHAIN iTNC 530 Table NC Rotary Table INCLUDED Table surface 500×380 mm. Maximum weight on table 500 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) 108º Direct Measurement System INCLUDED Routes and advances Longitudinal travel (X-axis) 500 mm Cross travel (Y-axis) 450 mm Vertical travel (Z-axis): 400 mm X-axis fast feed 80,000 mm/min Fast forward Y-axis, Z 50,000 mm/min Fast forward B, C axes 18,000 mm/min Number of Controlled Axles 5 Head Head speed 18,000 r.p.m. BT-40 Head Cone Main Motor Power 30 kW Equipment Automatic tool loader INCLUDED No. of positions in tool loader 30 Internal cooling 40 Bar INCLUDED Coolant tank with paper filter INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel Others Total installed power 52 kVA Machin ...

This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine.

Key data: 3000 mm, 800 mm, 720 mm

Control: Smooth X Travels X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Max. table load: 2,500 kg Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 Tool magazine Number of tool positions: 48 Special accessories Additional work area light Tool magazine with 48 tool positions Rotary table diameter: 500 mm Chip conveyor Mayfran, ejection High-pressure pump 15 bar incl. gap filter Synch. Threading Rapid traverse constant angle of inclination Ethernet Operation Function Cylinder interpolation Hours Switch-on time: approx. 12,000 hours Spindle hours: approx. 4,500 hours

This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information.

For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC R-2000-165 Robot Year of construction 10-2020 Commissioning 2021 MAZAK VARIAXIS i-800 5-axis machining center Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: +-360° Max. spindle speed 10,000 rpm SK-50 mount, -Tool magazine for 120 tools -Preparation for hydraulic clamping incl. clamping function pallet -Automatic pallet changer -Electronic handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 Laser -Air blowing on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 button - Tool Breakage Monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO  ...

This 3-axis HAAS VF 11/50 was manufactured in 2011. It features a robust CNC control, a large table surface of 3048 × 711 mm, and can handle a maximum load of 1814 kg. With X, Y, Z travels of 3048 mm, 1016 mm, and 762 mm respectively, it offers extensive working range. The spindle can reach up to 7500 rpm, and it includes a 30+1 random tool changer. Consider the opportunity to buy this HAAS VF 11/50 vertical machining centre. Contact us for more information.

This 4-axis MORI SEIKI SH400 was manufactured in 1998. A twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Noteworthy are the through-spindle coolant and chip conveyor. Ideal for automated 4-axis machining, though it requires a new X-axis drive and is currently non-operational. Consider the opportunity to buy this MORI SEIKI SH400 horizontal machining center. Contact us for more information about this machine.

This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine.

This 4-axis vertical machining centre was manufactured in 2018. Equipped with a controlled 4th axis (HRT300), it boasts a main spindle speed of 15000 rpm and 30 tool slots for versatile operations. Renishaw tool setting ensures precision, while internal cooling via the main spindle enhances efficiency. With 22856 total running hours, this HAAS VF-3SS is meticulously maintained, resembling a new machine. Consider this Haas VF-3SS vertical machining center for a seamless production experience. For further information, please contact us.

for spare parts. Machine is out of service. Processor card removed

Fabricante / Modelo JOHNFORD Modelo SV-41 + DIVISOR 4º/5º EJE Año de fabricación 2007 CNC HEIDENHAIN iTNC 530 Mesa Dimensiones mesa 1.200 x 600 mm Peso máximo permitido en mesa 1.200 kg Recorridos y avances Recorridos (X / Y / Z) 1.050 / 610 / 610 mm Distancia desde nariz husillo a mesa 100-710 mm. Distancia desde centro husillo a columna 640 mm. Avance rápido (ejes X, Y) 30.000 mm./min. Avance rápido (eje Z) 20.000 mm./min. Avance trabajo 12.000 mm/min. Cabezal Cono husillo BT-40 Velocidad máxima husillo 60-10.000 rpm Potencia husillo 7,5 / 11 kW Cargador automático de herramientas Tipo cargador Bidireccional RANDOM Posiciones cargador herramientas 20 Diámetro máximo herramienta 100 mm Longitud máxima herramienta 320 mm Peso máximo herramienta 10 kg Equipamiento Refrigeración interna 20 Bar INCLUIDO 2 evacuadores de viruta longitudinales IN ...

Manufacturer QUASER Model MV204IIU / 10 Year 12/2002 CNC HEIDENHAIN ITNC530 3 work tables / pallets Table 1 Size Ø280 mm. Table 2 Size Ø 500 mm. Table 3 Size 600×400 mm. Weight allowed on table 265 kg Min-max distance on table 150-760 mm. Axles Travels (X/Y/Z) 700/590/480 mm Tilting head movement range (A-axis) ±110º Axis Positioning A 0.001º Table Rotation (C-Axis) 360º C-Axis Positioning 0.001º Fast Forward Axles (X/Y/Z) 32,000 mm/min Maximum Working Advance (X/Y/Z) 15,000 mm./min. Head Head Speed 10,000 r.p.m. BT-40 Head Cone Main engine power 15/33 kW Par 192/189 Nm. Charger Tools No. of Positions in Tool Loader 32 RANDOM tool change system Maximum tool length 280 mm. Maximum tool weight 7 kg Other Equipment Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Coolant tank capacity 280 l. Refrigeration electrical cabinet INCLUDED Clea ...

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Key data: 750 mm, 600 mm, 560 mm

DMG DMC 75V Linear . Details: YOC 2004 Program run 38,958 hours Spindle hours 37,462 hours Rapid traverse 90m/min Travel X-750/Y-600/Z-560mm Spindle HSK63 18,000rpm Tool magazine 30 places Direct path measurement system Table 950 x 650 Heidenhain iTNC 530 Outer blowing air Accessories: WITHOUT accessories such as tools, mounts and zero-point clamping system.

Key data: 750 mm, 600 mm, 400 mm

Röders RFM 750 - a reliable companion for your production requirements. This used 3-axis graphite processing machine from 2001 convinces with its solid construction and precision. Details YOC 2001 incl. graphite extraction Accessories WITHOUT accessories such as tools, mounts and zero-point clamping system or clamping plates. Technical data Travel X/Y/Z: 750/600/400 mm Spindle speed: up to 42,000 rpm Spindle power: 7.5 kW Machine weight: approx. 5,500 kg Dimensions: 3,000 x 2,500 x 2,800 mm

CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Vertical Drilling and Milling Center Brother TC-22A with 4th Axis Year of Make: 1999 Control: Brother Technical data: Spindle speed: max. 12,000 rpm Tool holder: BT 30 Number of magazine slots: 26 Travels: X-axis: 500mm Y-axis: 400m Z-axis: 410mm 4th axis: 0.001° Accessories: Nikken Rotary Table Base plate zero point clamping system We have 2 identical machines in stock.

Inv. Num. : 8953 Type: MULTICUT 500i S Producer: MAS Created: 2011 Parameters: Control system: Siemens SINUMERIK 840 D Maximum turning diameter: 690 mm Max. turning length: 1527 mm Maximum milled profile: 486 x 486 mm Maximum spindle speed: 3500 1/min Maximum workpiece weight: 1600 kg Axis X: 640 mm Axis Y: 370 mm Axis Z: 1600 mm Length: 5400 mm Width: 3950 mm Height: 3760 mm Weight: 22000 kg

This 3s Kitamura mycenter H400 was manufactured in 2002. It features a full simultaneous 4-axis capability, a pallet changer, and a FANUC 15M control system. The machine has a maximum workpiece diameter of Ø600 mm and a pallet size of 400 × 400 mm. With a spindle speed of 20 – 10,000 rpm and a tool magazine capacity of 100 tools, consider the opportunity to buy this Kitamura mycenter H400 horizontal turning machine. Contact us for further details.

This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details.

This 3 axes Wele RB - 212 was manufactured in 2016. It features an impressive X-Axis travel of 2120 mm, Y-Axis travel of 1200 mm, and Z-Axis travel of 800 mm. The machine is equipped with a Heidenhain iTNC 530 CNC system and can support a maximum weight of 3500 kg on its 2000 mm x 1100 mm table. Consider the opportunity to buy this Wele RB - 212 vertical machining center. Contact us for further details.

The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg

Variabele snelheid met frequentie verzenden Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

This 3s Unisign Uniport 4 vertical machining centre was manufactured in 2001. It features a generous X-travel of 4000mm, Y-travel of 1550mm, and Z-travel of 400mm, along with a Siemens 840D controller and a 50-tool automatic tool changer. The machine has been well-maintained, with a new spindle and bearings. Consider the opportunity to buy this Unisign Uniport 4 vertical machining centre. Contact us for further details.

Key data: 650 mm, 600 mm, 500 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 630mm Axis X ... 650mm Axis Y ... 600mm Axis Z ... 500mm Spindle speed... 0-18000 rpm controlled axes ... 5 IKZ ... 80bar Spindle holder ... HSK-A63. Magazine spaces ... 32 Axis A ... +30/-115° Axis C ... 0,001° Machine weight ... 9500kg The machine is in good condition, possible to test under power.

CNC Machining Center Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Travels: X-axis 2,000 mm Y-axis 620 mm Z-axis 520 mm Clamping area 2,500 x 600 mm Mount: SK 40 Tool Magazine: 56 – Tray Spindle speed: 8,000 rpm Accessories: - Chip conveyor AME KB 448 - Paper belt filter AME PS 120 - LTA suction - Machine hood

Key data: 762 mm, 508 mm, 508 mm

Inv. Num. : 8969 Type: UMC 750 Producer: HAAS Created: 2020 Parameters: Switch-on hours: 8496 h Hours: 6185 h Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm

This 3-axis DMG MORI DMC 650V vertical machining centre was manufactured in 2017. It features a CNC Celos with Siemens 840D, a spindle speed of up to 20,000 rpm, and a tool magazine with 20 SK40 positions. The table measures 960 x 570 mm, and it includes an NC divider Mori Seiki DDRT 200X. If you are looking to get high-quality milling capabilities, consider the DMG MORI DMC 650V machine we have for sale. Contact us for more information.