cnc work centre used for sale

STAMA MC325 / S 2-palllet Double fourth axes Spindle 9000 rpm / 36 tools priced to sell low price - good deal The machine is visible in our warehouse in Gussago BS., Mimu Machine Tools, Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets, CNC type: Siemens, Fourth axis: 2 + 2, Number of pallets: 2, Spindle speed RPM: 9000

Key data: 730 , 730 , 850

CNC controller: FS-31IA (MSX-701 III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 División estandar Grados: 0.001º Maximum workpiece rotation diameter mm.: 800 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: HSK A63 Bearing Inner Diameter mm.: 40 Spindle torque Nm: 220 Tool system Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Tool Shanks : BT-40 NUMBER OF TOOL OFFSE ...

Vertical machining center, CHIRON FZ08KW, 2 pallet, 15000 RPM, HSK40A, CNC Fanuc 21iM, The machine is visible in our warehouse in Gussago BS. M i m u Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

Control Heidenhain ... TNC 530 Clamping table surface... 600mm Axis X ... 800mm Axis Y ... 700mm Axis Z ... 610mm Spindle speed ... 20-15000 rpm controlled axes ... 5 cooling ... 20bar ISO 40 Max. workpiece weight ... 300kg Main engine power ... 25kW Rapid traverse ... 32,32,16m/min Number of positions in the tool changer... 30 Machine weight ... 8750kg L x W x H ... 3710x2530x3230mm

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Horizontal machining center, 6 pallets, Priced to sell - dismantled and loaded into truck, OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy), X: 560, pallet: 6, Pallet size: 400400

The Röders RFM 1000/2 is a high-precision vertical machining center designed for intricate milling tasks. Below are its key technical specifications: Travel Distances: X-Axis: 1,000 mm Y-Axis: 800 mm Z-Axis: 600 mm Table Specifications: Dimensions: 1,200 mm x 1,000 mm Maximum Load Capacity: 2,000 kg Spindle Details: Speed Range: 100 to 36,000 rpm Power: 17 kW Sortware update :2019 Find more here - / Contact us at -

Key data: 6800 mm, 1400 mm, 650 mm

Five-axis CNC for staircase construction Timber construction with vacuum pump Treversening table Two 12-fold tool changers and 2 additional places for saw blades up to 450mm diameter

Key data: 4050 mm, 2600 mm, 1070 mm

Hartford PRW 426L CNC Double Column Vertical Machining Center CNC control Heidenhain iTNC 530 Table size 4200 x 2040 mm Table load 15,000 kg Number of pallets: 1 Travel X-Y-Z axis: 4050 / 2600 / 1070 mm Spindle taper DIN 69871a-SK 50 Spindle speed 6,000 rpm Number of tools in the magazine: 60 pieces If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Maximum length of the piece: 1100 mm, Minimum length of the piece: 50 mm, Maximum diameter of the piece: 125 mm, Minimum diameter of the piece: 8 mm, Center height of tailstock above guide: 145 mm, Center height of tailstock above carriage: 65 mm, Centering hole taper angle: 60°, Larger diameter of centering hole cone: 50 mm, Diameter of smallest centering hole: 2 mm, Grinding spindle speeds: 45000 / 22 500 / 13 000 rpm, Hollow screw speed: 400 rpm, Stroke of the grinding wheel along the grinding surface: 0.75 - 5 mm, Diameter of grinding wheels: 15, 27, 48 mm, Weight approx.: 460 kg, Dimensions (length x width x height): 850 x 750 x 1850 mm

Key data: 1050 mm, 510 mm, 560 mm

Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Key data: 730 mm, 730 mm, 740 mm

Mazak PFH 5800 (10 Pallet) CNC Horizontal Machining Center CNC control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg X-axis travel 730 mm Y-axis travel 730 mm Z-axis travel 740 mm Table indexing 360 x1° Spindle taper CAT 40 Spindle 12,000 1/min Spindle motor 22/15 kW Magazine capacity 80 Required footprint 9850 x 10145 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock number 1105-04058 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type MYNX 540 Year of construction 2002 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Ex-works freight base Technical details longitudinal 1020 mm landscape 510 mm vertical 625 mm Tool Changer 30 Pos. max. tool length 250 mm max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm Rapid traverse 30 m/min Machine weight approx. 7 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (centre of the table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 SPEED ATC BT 40

Key data: 700 mm, 600 mm, 450 mm

Machine Details Stock-No. 1105-04059 Type of machine Machining Center - Vertical Make HURON Type KX 8 Year of manufacture 2001 Type of control CNC Storage location HAGUENAU FRANCE Country of origin FRANCE Delivery time IMMIDIATELY Freight basis EX WORKS Price Technical details x-travel 700 mm Y-Travel 600 mm Z-Travel 450 mm Feed speed x,y,z; 0 - 24 m/min. surface area 1250 X 700 mm table load 1 t spindle turning speed - stepless 24000 rpm power capacity at 100 % load 20 kW Spindle Taper HSK 63 Spindle diameter 90 mm tool change unit 20 places; distance between columns 800 mm control SIEMENS 840 D Additional information VERY NICE MACHINE CONTROL siemens 840 d SPINDLE RPM 24000 new in 2024 hsk 63 MAGASIN 20 TOOLS hsk 63 COOLING TROUNG THE SPINDLE

Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min

Staral 190 Ø 380 x 1000 mm Distance between centers: 1000 mm Swing over bed: 380 mm Swing over cross-slide: 220 mm Diametre of main spindle bore: 38 mm Number of speeds: 29 > 1500 rpm

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

Key data: 350 mm, 250 mm, 200 mm

• Brother milling machine – TC 31 machining center (2 pieces, fig. 1) Year of Make: 2007 Travel X: 350 mm Travel Y: 250 mm Travel Z: 200 mm Spindle speed: up to 22,000 rpm Spindle cone: BT30 Work table: 500 x 270 mm Wz – Magazine: 26 seats Special feature: Table designed as a rotary changer, loading clamping holder via magazine and ABB robot

Gornati Legoor 300 Ø 600 x 1500 mm Distance between centers: 1500 mm Swing over bed: 600 mm Swing over cross-slide: 370 mm Swing in gap: 900 mm (440 mm long) Diametre of main spindle bore: 108 mm Power on main spindle: 15 hp Number of speeds: 20 > 1500 rpm

X,Y,Z Travels 630,530,465 mm Spindle speed 18.000 rpm Tool holder SK40 Number of tools 32 Controller Heidenhain iTNC 530 With Tool and workpiece measuring probe With chip conveyor

Key data: 1660 mm, 510 mm, 510 mm

For sale: Mazak vertical machining center type VTC-20C with a Mazatrol M Plus controller. X, Y and Z axis movement is 1660 x 510 x 510 mm. Table size. 2000 x 510 mm. Speed range 40 -7,000 rpm. Spindle holder ISO-40. The machining center is equipped with cooling by the spindle. Tool changer with 2 x 24 positions. The machining center is still in good condition. Still to be seen under power, intermediate sale reserved

Key data: 800 mm, 500 mm, 560 mm

Machine Details Stock-No. 1105-04061 Type of machine Machining Center - Vertical Make VICTOR Type VCENTER 80 Year of manufacture 1996 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time to be agreed upon Freight basis EX WORK Price Technical details X-Travel 800 mm Y-Travel 500 mm Z-Travel 560 mm feed speeds x/y/z axis 18 m/min distance spindle center to column: 600 mm tool taper BT-40 spindle drive 5.5 / 7.5 kW spindle turning speed - stepless 8000 rpm table dimensions (lengthxwidth) 950 x 500 max. table load 750 kg Tool Magazine: 32 max. workpiece weight 7 kg Additional information Including accessories, tool tapers, , tools and documentation. FANUC OM chip convoyer

Harrison M400 Ø 430 x 1000 mm Distance between centers: 1000 mm Swing over bed: 430 mm Swing over cross-slide: 254 mm Diametre of main spindle bore: 65 mm Power on main spindle: 7,5 kW Number of speeds: 10 > 2000 rpm Length: 2740 mm Width : 1000 mm Height: 1270 mm Weight: 2 ton

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

DMG DMC70H year 2007 Hours in picture he 2007 Deckel Maho DMC 70 H is a horizontal machining center produced by DMG (Deckel Maho Gildemeister), a renowned German manufacturer known for high-quality CNC machining centers. Here are the key details about this model: Key Specifications: - Type: Horizontal Machining Center - Year: 2007 - Table Size: Usually features a pallet size of 630mm x 630mm, though this can vary based on the setup. - X-Axis Travel: Around 700 mm. - Y-Axis Travel: Around 800 mm. - Z-Axis Travel: Around 800 mm. - Spindle Speed: Can reach up to 18,000 rpm, depending on the specific configuration. - Spindle Motor: Offers robust power, typically around 35 kW (may vary based on options). - Automatic Pallet Changer: Often comes with an automatic pallet changer, improving productivity by minimizing downtime during setup. - High-Rigidity Design: Known for its rigid construct ...

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

DMG DMC 70 H year 2007 The 2009 Deckel Maho DMC 70 H is a horizontal machining center manufactured by DMG (Deckel Maho Gildemeister), which is a well-known German company that produces high-precision CNC (computer numerical control) machine tools. Hours in picture Find more here - / Contact us at -

For Sale: 2008 Deckel Maho DMC 70 H duoBLOCK Horizontal Machining Center - Year: 2008 - Make/Model: Deckel Maho DMC 70 H duoBLOCK - Type: Horizontal CNC Machining Center - Control: Siemens 840D - Features: - duoBLOCK design for high rigidity and precision - 5-axis capability - Automatic tool changer - High-speed spindle - Coolant system - Condition: Good, fully functional, under power Find more here - / Contact us at -

CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16  ...

CNC Model: Fanuc - CNC Version: 18i - TB - Main Spindle Nose: ASA 8 - Main Spindle Power: 26Kw Main spindle bar passage: 81mm - Turning diameter: 300mm - Turning length: 350mm - Main spindle speed: 3500 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 255mm Y-axis travel first turret: +- 60mm First turret Z-axis travel: 800mm Number of second turret tool positions: 12 Number of motorized second turret: 12 Second turret X-axis travel: 190mm Second turret Z-axis travel: 900mm Fast feeds for linear axes X Y Z: 24m/min Sub-spindle: yes Spindle nose: ASA 8 Number of counter-spindle speeds: 3500 Counter spindle power: 26Kw Bar Passage: 81mm Z stroke sub-spindle : 810mm Chip conveyor: belt Presetting: yes Machine equipment: Machine supplied wit ...

Takumi H16 Machining Center :::TECHNICAL SPECIFICATIONS::: CNC model: Fanuc - CNC version: 18i MB - Tool holder: iso 40 - Spindle speed: 16000 Number of tools: 26 - X-axis travel: 1600mm - Y-axis travel: 1300mm - Z-axis travel: 700mm Fast feeds for linear axes X Y Z: 24m/min Table dimensions: 1900 x 1300mm Table capacity: 8000Kg Gantry type: Gantry with fixed upright moving table Chip conveyor: belt Presetting: yes Machine equipment: spindle overhauled in May 2024 :::D DIMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 3700mm

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 18-T Main spindle nose: ASA 11 Main spindle power: 37Kw Main spindle self-centering diameter: 450mm Main spindle bar passage: 117.5mm Turning diameter: 650mm Turning length: 1575mm Number of tool turrets: 1 Number of fixed tool positions for the first turret: 12 First turret X-axis travel: 370mm First turret Z-axis travel: 1575mm Tailstock: yes Steerer stroke: 150mm Chip conveyor: belt :::D DIMENSIONS AND WEIGHT::: Length: 4930mm Width: 2460mm Height: 2587mm Weight: 13690Kg

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

Key data: 3060 mm, 1260 mm, 150 mm

SPECIFICATIONS: Workspace: X: 3060 mm Y: 1260 mm Z: 150 mm 03 Axles Automatic lubrication system 06 ATS tables (length: 1200 mm) 018 Track rollers 06 rear stops 06 stops at height 970 mm Side stops (2 right + 2 left) 04 Bar lifter Turret tool magazine with 10 places 01 Drill head BH 21 L (7x+7y vertical - 4x+2y horizontal - x-axis knife) 01 Air Cooled 12kw Electrospindle HSK F63 Coupling 01 Becker vacuum pump: 100 m³ SYSTEM: Biesse Works XP600 Controller EQUIPMENT: Carpets and barriers Various tools

Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator

Key data: 3000 mm, 920 mm, 50 mm

CNC Drilling Center C-Express Classic Drilling/sawing/milling from below Easy operation via graphical user interface 1 Machine Software License 19" LCD color display, mouse keyboard Machine weight 850kg Machine dimension: 2,100x1,500x1,950mm Milling spindle 3.3kW (S1), 24,000rpm Collet ER32 manual Drill Head DH 15 6H1S 9 vertical drilling spindles 6 hotizontal drilling spindles 1 grooving saw X direction More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor

CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: Infinite, Regulating wheel speed nº: Infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dimensions of the regulating wheel (OD x ID x W): 305 x 190.5 x 254 mm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Power hydraulic motor: 0.55 Kw., Hydraulic motor power: 0.55 Kw., Total power: 27 Kw., Voltage: 220/380V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Tall: 1.900 mm, Weight: 6.420 Kg.

Mazak QTN 350M x 1200 Motorized Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: FUSION 640 T NEXUS Main spindle nose: ASA 8 Main spindle power: 22Kw Main spindle bar passage: 76mm Turning diameter: 420mm Turning length: 1173mm Number of main spindle speeds: 3300 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm First turret Z-axis travel: 1240mm Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3450mm Width: 2050mm Height: 2000mm Weight: 7500Kg

HEDELIUS BC 40 MACHINING CENTER - X 1600 mm - Y400 mm - Z 400 mm SK40 HEIDENHAIN control system

overhauled: 2024 Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling... 20bar ISO 40 L x W x H ... 2700x3000x2940mm Machine weight... 5500kg Magazine spaces ... 20 The machine has undergone a complete overhaul. More info on request.