138,531 used machines on RESALE, but how to find them? Machine Search
JLG 3246E2 Electric Scissor Lift – 11.75m Working Height – 315kg – 2001 Specifications: Brand: JLG Type: 3246E2 Year of construction: 2001 Production date: 01-2001 Serial Number: 0200091266 CE marking Electric self-propelled scissor lift Maximum working height: approx. 11.75 m Maximum platform height: approx. 9.75 m Platform capacity: 315 kg according to rating plate Maximum number of people when used indoors: 2 Platform dimensions: approx. 2.10 × 1.10 m Platform extension: approx. 0.91 m Total length: approx. 2.30 m Total width: approx. 1.17 m Total height: approx. 2.30 m Own weight: 2,749 kg according to type plate Electrical installation: 24 V Traction batteries: 4 × 6 V, factory specification approx. 245 Ah Maximum wind speed outside: 12.5 m/s Maximum allowable inclination when raised: 2° Maximum travel speed in transport position: factory specifica ...
pressure: 75 t stroke: 250 mm daylight longitudinal/sideways: 800 x 215 mm dayligth: 170 - 885 mm working pressure: 7,5 - 8.5 bar weight of the machine ca.: 0,45 t dimensions: 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cold work tool steel 4 pcs Diameter 299 Length 232mm Weight 191.5kg Wnr. 1.2379, X153CrMoV12 EN/ISO 4957 forged, annealed, peeled, or overturned, round DIN 7527 Bl.6
gebr. Aerial work platform telescopic, mobile, battery-operated, with boom - Lifting height: approx. 9 meters - Load capacity: 125 kg - Working height: 11 meters - Platform size: approx. 650 x 650 mm - Battery: without battery - Charger: R 8/12 - Dimensions (folded): 1700 x 700 x 2800 mm - Support (LxW): approx. 1900 x 1800 mm - Number of masts: 1 - Engine power: 0.8 kwh Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Payload max. approx.: 125 kg ext. Length approx.: 9 m Machine weight: 350 kg Total Power Requirement: Battery Colour: blue
The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm
Manufacturer: Biesse, Type: Rückführung, Year: 2008, Work piece width min-max mm: ca 800, Min.-max. workpiece length in mm: ca. 2.000, for left machine: yes, Angular transfer: yes, Drain roller operation: yes, Work piece width min-max mm: ca 800, Min.-max. workpiece length in mm: ca. 2.000, Recharging length mm: ca 7.000 + 2.000, Year :2008
Manufacturer: Winkelübergabe AM 35, Year: ca. 2015, Control: yes, Conveyor belts Qty: 2, Conveyor belt 1 mm: 6000, Belt width 1 mm: 1300, Belt width 3 mm: 1450, Working hight adjustable mm: yes, Belt transfer: yes, Angular transfer: yes, Feeding speed max m/min: ca. 20, Feeding speed continous adjustable: yes, Dimensions L x W x H mm: 3000x4350x900, Year :ca. 2015
Manufacturer: Bargstedt , Type: TFU 02, Year: 1995, Conveyor belts Qty: 2, Conveyor belt 1 mm: 7000, Conveyor belt 2 mm: 3000, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-60, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: yes, Luftkissentisch pneumatisch: yes, Drain roller operation: 1300, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-60, Feeding speed max m/min: 10-30, Year :1995
Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997
Manufacturer: Wamhoff, Type: Luftkissentisch Rückführung, Year: ca.1998, Control: hand, Conveyor belts Qty: 4000, Belt width 1 mm: 880, Conveyor belt 2 mm: 2790, Belt width 2 mm: 860, Conveyor belt 3 mm: 4000, Belt width 3 mm: 600, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: 880-950, Luftkissentisch pneumatisch: yes, Angular transfer: yes, Drain roller operation: yes, Year :ca.1998
Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: variable The scope of delivery includes: 01x Workbench frame, new Material colour: grey Workbench frame legs: Heights adjustable 01x Worktop, new Material: Multiplex Material thickness: 38 mm Overall width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...
length: 1560 mm width: 760 mm height over floor: 880 - 920 mm weight: 70 Kg Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1150 mm width: 610 mm height over floor: 910 mm table load capacity: max. 450 Kg dimensions: 1170 x 640 x 135 m weight: 47 kg Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. ( IP20 ) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1200 mm width: 600 mm height over floor: 860 mm table load capacity: 250 Kg dimensions: 1200 x 600 x 400 m weight: 49 kg Workbench with 4 drawers and solid wood worktop Dimensions of the large drawer (WxDxH) 940 x 400 x 80 mm Dimensions of the small drawer (WxDxH) 460 x 400 x 80 mm Dimensions of the small drawer (WxDxH) 465 x 395 x 440 mm Height adjustment max. 30 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm daylight longitudinal/sideways: 1300 /450 mm dayligth: 900 mm tank capacity: 75 l liter capacity: 22 l feed down: 6,9 mm/sec feed up: 12,6 mm/sec Motor output: 7,5 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,0 x 0,75 x 2,8 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1200 mm width: 600 mm height over floor: 860 mm table load capacity: Kg dimensions: 1200 x 600 x 400 m weight: 49 kg Workbench with 5 drawers and solid wood worktop Dimensions 1200 x 600 x 870mm Drawer dimensions (internal) 430 x 400 x 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t stroke: 400 mm table surface area: 920 x 540 mm Motor output: 2,2 kW liter capacity: 9,0 l dayligth: 800 mm tank capacity: 31 l daylight between the columns: 920 x 300 mm weight of the machine ca.: 0,725 t dimensions of the machine ca.: 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 2000 mm width: 800 mm height: 1250 mm weight: 170 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1680 mm width: 780 mm height: 1250 mm weight: 63 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data and features: -Made in Germany -Type Standard Shepherd Series 14/6-2 -Made of high-quality stainless steel sheet -Dimensions length 425 x width 275 mm -Material thickness: 1.5mm -Weight: approx. 1.5 kg -315 shape punches for bayonet closure with the plastic clips -The currently available used workpiece carriers are partly electropolished and partly marked. We offer used and new workpiece carrier systems with different plastic clips, also as custom-made products and in different sizes. In addition, the appropriate basket systems and automation technology are also available if required.
Transition staircase with landing, galvanized, landing: 1.51 m long Frame made of flat 200x8, height: 1.64 m, steps grating 30 thick, step height 0.20 m, step width 0.80 m, 8 levels used
UNION SINGLE SCREW EXTRUDER, barrel with 150 mm Ø screw, 40 L/D, electric cabinet, degassing system, nominal throughput rate ca.700 kg/h, missing of screenchanger - available semi-automatic on separate offer, missing of cutting unit - possible addition of strand/water ring/underwater on separate offer, This is an evergreen sturdy extruder
maximum number of results exceeded
please refine your search
25 € 
