We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,107 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Wood milling and turning machine We will provide you with more information about the machine by phone or e-mail.
used
approx. 70 wooden proofing planks 60x40x3 without trolley
used
I sell the vacuum wood dryer ISVE for about 5m3 of wood. Chamber Long 6m x Dia. 1,60m Trolley system. Wagon and plate condition very good ! Door to one side. Condition very good, worked very little Trolleys, plates and fans without any problems. Available soon.
used
vibratory feeder diameter range 2-6 mm total screw length 40 mm output - pieces/min 47
used
COMAFER grinder model DINAMIC MAC 500 for wood waste: - hourly production from 100 to 200 kg/h - rotor motor HP10 / kw 7.5 , volt 380 - rotor diameter D=160mm, with knives - Pneumatically operated feed drawer - Hopper dimensions 965 x 500 mm - Overall dimensions approx. 1.7 x 0.95 x h=1.5 m - weight about 800 kg - machine according to CE standards, year 2000 AVAILABILITY FROM APRIL 2024
used
WEIMA WL 6 I chipper Crusher from the German company WEIMA – documentation – year of production 1998 TECHNICAL PARAMETERS: filling dimension 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor speed 90 rpm V-rotor main engine 22 kW number of knives 21 pieces rotatable cutting knives 35 mm x 35 mm sieve diameter 20 mm and 15 mm AUTHOR-VERSE HYDRAULIC DRAWER pressure drawer height 175 mm connector diameter 200 mm dimensions (length/width/height) 230 / 140 / 160 cm weight 1400 kg
used
OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw blade diameter 550mm Pneumatic material clamping Pneumatic saw passage Saw control with two buttons 7.5kw main motor 2x roller tables length 160cm each CE Certified White Paper
used
: Breite/Länge mm Motor output: 4,5 kW : m³ Diameter of the motor: mm Dimensions (L/W/H): mm Weight: 258 kg : mm Heating capacity: kW Number of ventilators: St. Year: 2022 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Crosscut saw Omga T620 Cutting width max 400mm Cutting height max 140mm Pneumatic material clamping Pneumatic passage of the cutting unit Two tables with a length of 2x200cm 4kw motor
used
Various rustic furniture in spruce and walnut wood See photos!
used
Various rustic furniture in spruce and walnut wood See photos!
used
Hopper chipper Vecoplan VAZ 700 Yellow Shaft width 700 mm 9/7.5 kw two-speed motor Auto Reverse Hydraulic Drawer Feed inlet 800 x 500 mm Two sieves included Year of Build 2009 Machine weight: 930 kg Machine dimensions: 1900x1500x1900 h mm The chipper is suitable for hardwood and softwood
used
Press type JJZ-CP designed for the production of plywood, doors, MDF boards. Feeding and receiving glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue dispensers. Technical data: -max. pressure 500T/adjustable/ -max. charge height 1300mm -max. size of the batch 1300x2500 -dimension of the press 3600x1370x4500 mm - foundation of the press ~500 mm below the floor level - feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -CE mark - capacity of 6 batches per hour Currently, we use the presses to glue board doors and MDF boards. Very good technical condition. We offer a plywood production line dedicated to these presses.
used
Uniwood belt sander - model: Sanding 1 - year of production: 2006 - serial number: 46060167 - grinding brush heads with a 1.8 kW motor - grinding unit with an adjustable angle of 2.6 kW - belt width: 90 mm - tape supplying Uniwood material in the set - dimensions: 2100 mm x 130 x 210 mm - weight: 600 kg
used
MS UBS-6-90 circular sawmill - German production - high efficiency - DTR - year of production 2007 - possibility of installing 6 shields - daily capacity up to 200 m3 max. log diameter 390 mm cutting width from 80 to 250 mm width of the additional board from 18 to 80 mm disc diameter 1000 mm electric disc spacing engine power 2 x 90 kW feed speed continuously adjustable 5-30 m / min 4 kW feed motor power length of the feeding table 8000 mm feed table with chain turners dimensions of the cross feeding table 4500 x 7000 mm length of the receiving table 5600 mm dimensions of the corrugated receiving table 4000 x 4000 mm reception of sawdust with vibrorine two lasers total length 18.5 m weight of the sawmill 9.8 tons
used
Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225 - rotating head 360 - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5 x 2.4 x 2.4 m weight 12000 kg
used
Walter WDPP-410 edger The WDPP-410 flashing machine is widely used in many sawmill plants. The design of the machine and the principles of its operation allow for quick recovery of purchase costs and limiting raw material losses to a minimum. Reliable operation and safe operation of the saw translate into a high efficiency rate. – Polish production – DTR, CE min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/m ...
used
FILTERING SUBSTATION FOR WOOD DUST AND SAWDUST FRIULANA VENTILATION - USED - NO. 72 Cotton cloth filter bags with dimensions: FI 200mm - H 2000 mm - Maximum filter FILTERING capacity 13,000 m3/hour - Material: galvanized sheet metal It is equipped with: - Screw conveyor for material extraction - with variable speed drive and gearbox - Rotary valve - 1 fan with 15 kW motor - 1 fan for transporting the material from the filter to the silo (or other storage) - Electro-vibration system for cleaning the filter bags - Electrical control cabinet - Dimensions: 2400 x 2900 x H 5600
used
Copy lathe model AHDK 125 with copying device Year 89
used
SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm
used
Chipper WEIMA WLK 6 S Crusher from the German company WEIMA – after technical inspection – year of production 2008 –documentation – NEW KNIVES TECHNICAL PARAMETERS: infeed dimensions 800 x 2100 mm rotor diameter 315 mm rotor length 800 mm rotor speed 90 rpm V-rotor main motor 37 kW number of knives 42 pieces rotatable cutting blades 40 mm x 40 mm sieve fi 12 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 275 mm diameter of the spigot fi 200 mm dimensions of the machine (length/width/height): 250 / 180 / 170 cm weight 1700 kg
used
Chopper/shredder/shredder to crush by Carpentry waste, carpentry waste, pallets and wood waste of many kinds. Propulsion: 15 kW Insertion dimensions: 800 x 1000 mm Workshop tested in good condition
used
Crushing machine for shredding joinery and joinery waste, as well as Wood waste of many kinds Insertion dimensions: 600 x 800 mm Propulsion: 18.5 kW Photo shows the machine as returned by customer
used
Wood chipper, sawmill edgings LINDNER type T 400/140-2 – after technical inspection - very good condition – for technological chips TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm main engine power 33 kW motor power from feed 2 x 1.5 kW number of knives 2 pieces sieve with dimensions of 60 mm x 90 mm feed shafts in very good condition feeder feed motor power 1.5 kW feeder length 4200 mm transport dimensions (length/width/height) 430 / 240 / 150 cm weight approx. 2000 kg
used
Description: Cabinets each with 7 pull-out drawers, , Contents: Clamping material, mounting material for temperature control units Approx. Onsite Dimension. (l x w x h): 2,000 x 540 x 850 mm, weight approx.: 300 kg
used
main motor: 0.75 kW, cutting width: 1,000 mm, Approx. Onsite Dimension. (l x w x h): 1,200 x 620 x 1,600 mm, weight approx.: 100 kg
used
vibratory feeder diameter range 6-20mm total screw length 60-350 mm output pieces/min 2 - 8
used
Lot Composed of various machinery for the processing of plastic and wooden components for eyewear. n.1 Ventilation System with extractor and filters: Used for the extraction of fumes generated by the combustion of PVC materials in ovens. n.1 Cielle CNC machine: Used for milling and cutting wooden components for glasses. Brand Cielle Model ALFA 61X6, Year 2011, S/N 24/11 WEIGHT 250kg VOLT 220/240 POWER 1800W n.1 Double action oven: Used for firing PVC material (Working temperatures up to about 300 degrees Celsius, 4 pieces. n.1 Green Box Chiller for closed-loop cooling of machinery. n.1 Press and Dehumidifier (5 pieces) : o Press: Used to cut labels that were then printed on the fabric. o Dehumidifier: Used to dehumidify TPU material into granules. o 1 Laser : Used for laser cutting organic material, also used for cutting fabric (textile). Can also be used for engraving. o n ...
used
Mixer sales stand/container wood, 6 cut-outs, approx. 60x110h cm, without fittings
used
Desk wood décor dark, approx. 160b cm, traces of use
used
Dining table wood approx. 180x80 cm, base metal anthracite
used
Side table wood décor white approx. 60x120 cm, traces of use
used
Coffee table wood décor dark approx. 110x60x40h cm, table top movable
used
Sample shelf for fronts wood décor grey NOBILIA, filled with various barrels, total dimensions approx. 300x210h cm, front manufacturer NOBILIA
used
Description: 7hp 212cc electric start 4 inch shredding capacity dual v-belt drive blade length 150 mm twin blade drum system building kit Approx. Onsite Dimension. (l x w x h): 880 x 565 x 830 mm, weight approx.: 88 kg
used
Description: Composed of: N°2 wooden office furniture of size: 700 x 450 x 950 A computer, monitor, keyboard and miscellaneous contents. Approx. Onsite Dimension. (l x w x h): 1,400 x 450 x 950 mm, weight approx.: 120 kg
used
Description: With content. Approx. Onsite Dimension. (l x w x h): 840 x 430 x 950 mm, weight approx.: 30 kg
used
Description: With content. Approx. Onsite Dimension. (l x w x h): 840 x 430 x 950 mm, weight approx.: 30 kg
used
Description: With content. Approx. Onsite Dimension. (l x w x h): 840 x 430 x 950 mm, weight approx.: 30 kg
used
Wall unit NOBILIA wood décor/grey, total width approx. 2,760 cm, 3 display case parts with glass shelves each approx. 45 cm, body slate grey, back plate and side parts oak Havana NB dismantled, completeness not known, purchased for exhibition 03/22, EK ? 1.100,- net
used
Assembly table aluminium/wood, approx. 100x203x100t cm, luminaire, cable duct
used
Description: Type: probably ATPK140/1331 Machine number: 10 Spindle speed range: 1000 - 5500 rpm Center distance: approx. 1300 mm Center distance on the smaller bed: approx. 1000 mm Center height (large bed): approx. 260 mm Center height (small bed): approx. 115 mm With accessories as shown in the pictures With hydraulic feed for chisel Approx. Onsite Dimension. (l x w x h): 3,200 x 800 x 1,450 mm, weight approx.: 2,000 kg
used
Description: Machine number: 44 Speed range: 1500/3000 rpm Center width: approx. 900 mm Center height: approx. 200 mm With accessories as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,830 x 720 x 1,600 mm, weight approx.: 500 kg
used
Description: Rotational speed: 56 - 2250 rpm Turning length: 1600 mm Center height above bed: 400 mm Turning diameter over bed: 800 mm Center height above support: 300 mm Turning diameter above support: 600 mm The machine is equipped with a tailstock and a four-jaw chuck (diameter: 200 mm) Also a digital display from the manufacturer ANILAM Incl. lot face plates suitable for the machine Approx. Onsite Dimension. (l x w x h): 3,000 x 1,300 x 1,800 mm, weight approx.: 1,500 kg
used
Description: Contents consisting of turning tools, glass lifter, grinding pins weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 700 x 900 mm
used
Description: With attached vice Jaw width: 125 mm Attention: the articles on the workbench are not included in the scope of delivery weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,300 x 1,000 mm
used
Description: Contents consisting of measuring equipment such as 3 calipers, various try squares, a digital caliper, woodturning tool, various hand tools, twist drills, reamers weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 750 x 900 mm
used
Description: Content consisting of reamers, twist drills, hammers, a hand drill, angle, calipers, various woodturning tools, files, a digital caliper weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 700 x 1,900 mm
used
Description: Contents consisting of cutting dies, taps, calipers, lot turning tools, files weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 700 x 1,900 mm
used
Description: Contents consisting of a vice (jaw width: approx. 150 mm), one lot reamers, twist drills, hand plane, calipers, try square, lot woodturning tools weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 700 x 1,900 mm