cnc welding used for sale

Amperage range maximum: 270 A Amperage range minimum: 210 A (1) TIG / (2) MIG: 1   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id    5402 MAKE         Fronius TYPE           TransPulse Synergic 2700 YOP              2015 SPECIFICATIONS Rated power   60 %        270 Amp Rater power 100 %          210 Amp Imput     16 A Tension         400 V Number off programs       100 DIMENSIONS Length       625 mm Width         290 mm Height         475 mm

floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4600 mm floor-plate width: 1620 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand welding pipes production line Inlet sheet dimensions: max. 8 x 12 m x 600 mm Outlet pipe dimensions: Dia.: 610 - 2500 mm (could be enlarged) Wall thickness: 40 - 600 mm Length: 12.0 m

Cell with welding robot (MIG) Motoman YR-MA01400-A00 Cell with welding robot (MIG) Yaskawa - Year of construction: 2010 - 6-schsen robot Motoman YR-MA01400-A00, - Source: Motoweld EL350 III - Positioner Yaskawa 2 pcs.. - Dimensions of the cell: 3300 mm x 3000 mm x 2400 mm - Control Motoman DX 100 - Weight: 2.5 t

Cell with welding laser E-TECH TRUMPF TLF4000 Year of construction: 2005 Laser: TLF 4000 Rok produkcji: 2005 Laser: TLF 4000 Receiving robot : Yaskawa Motoman NX100

Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.

Used but fully functional. Cooling unit for water cooling also available. Manufacturer: Dalex Type: SL 16-2G Year of construction: not apparent Length of electrode arms: 600mm Foot switch Equipment: • Electrode arms L = 600mm • Substructure / elevation 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

ARO Reversible Ergoline Type X Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: RESISTANCE welding gunARO/IQR YOC 2014, manual; incl. IQR Harvys turning control unit Additional production formats

ARO Reversible Ergoline kVA 55 Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: Resistance welding gun ARO/IQR, PSZ25, YOC 2014, manual; incl. IQR Harvys turning control unit

ARO Turn Ergoline Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: Resistance welding gunARO/IQR manual; incl. IQR Harvys turning control unit

ARO Reversible Ergoline Type X Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you.Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: Resistance welding gun ARO/IQR, YOC 2014, manual; incl. IQR Harvys turning control unit

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 354 KW Plant No. 126.411 Connection voltage 3 x 400 Volt Setting range 25 – 350 amps Duty cycle 40 % ED at 350 amps 60% ED at 280 amps 100% ED at 250 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,000 x 400 x 1,000 mm Weight 65 kg Age 12 months Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of welder gloves with gausty 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 1 piece i ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 454 DW Series No. 109.129 Connection voltage 3 x 400 Volt Setting range 20 – 450 amps Duty cycle 50 % ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,100 x 490 x 1,200 mm Weight 140 kg Special accessories Rotary connection on the DV case, filter attachment Control panel in the DV box, wheels on the DV case, Control panel cover flap Age 5 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable ...

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Outside diameter maximum: 0 mm Wall Thickness: 0 mm Pipe length maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Manual bending device: Tube: Diameter: 42 mm Wandstärke: 2 mm Max. bending angle: 185 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 3060 mm Width: 1025 mm Height: 1078 mm

Amperage range maximum: 0 A Amperage range minimum: 0 A Technical data Connection output: up to: 225 kVA Range: up to: 200 mm Working stroke: 0 - 80 mm Power of electrodes: up to: 3000 kp Working table surface: Length: 250 mm Width: 250 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 700 mm Width: 1900 mm Height: 2400 mm Various accessories: Watercooled Déclanchement à deux mains

Machine type MIG/MAG welding system Fabrikat Castolin Eutectic Type Derby 230 Connection voltage 3 x 400 Volt Setting range 25 – 230 amps Duty cycle 35 % ED at 230 Ampere 60% ED at 154 amps 100% ED at 120 amps Current setting 8 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 800 x 440 x 790 mm Weight 84 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 ...

Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Minipack Model Continua Year 2003 Min size 120 - 190 mm Max size 420 x 300 mm Max thickness 32 mm (but at 420 x 300 mm the max thickness is 8 mm) Production output up to 50 cycles per minute

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Used machine in good condition. Available for immediate delivery.

Specifications: - Welding current 600 A 45% ED 520 A 60% ED - 400 A 100% ED - Welding current adjustable - in 2 coarse stages and 10 fine steps from 50 A to 600 A - Digital Volt + Ampere display - 4 roller wire feed infinitely adjustable - Control M 100 for : - Two-stroke – four-stroke regulation - Interval welding - Spot welding - Stepless creep speed and wire backburn time - Intermediate package to the separate wire feed case approx. 4 lfm - Hose package approx. 4 lfm - Ground cable - Pressure reducer - Connection 400 V - Space requirement approx. W 650 x H 850 / 1250 x D 1100 mm - Weight approx. 280 kg

Make Kallfass Model Universa 400 NT Year 2000 Working width 400 mm x unlimted Min. Product length 100 mm Product length Unlimted Passage height 200 mm Capacity up to 60 cycles per minute

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

Technical data Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1800 mm

Amperage range maximum: 0 A Amperage range minimum: 0 A Table Length:        1.220mm Table Width:         1.220mm Table load on 50 mm: 5.000Kg Table load on 200 mm:4.545Kg Table load on 400 mm:3.500Kg Table load on 600 mm:2.900Kg Table load on 1000 mm:1.850Kg Rotation table:      360000° Length:              2.000 mm  Width:               1.600 mm  Height:              1.800 mm  Weight:              2.000 kg 

Amperage range maximum: 0 A Amperage range minimum: 0 A Table  Ø:            1.500mm Table load on 50 mm: 5.000Kg Table load on 200 mm:3.000Kg Table load on 400 mm:1.000Kg Table load on 1000 mm:500Kg Rotation table:      0,06 - 1,65 ° Length:              2.300 mm  Width:               1.500 mm  Height:              2.000 mm  Weight:              2.500 kg 

Amperage range maximum: 0 A Amperage range minimum: 0 A Load capacity per section:7.5 + 7.5 = 15 T Vessel range Minimum:    500Ø Vessel range Maximum:    4000Ø Variable rotation:       0,1 - 2000 mm Rpm No of wheels per section:2 Length:                  3.000 mm  Width:                   1.000 mm  Height:                  500 mm  Weight:                  2.000 kg 

Workpiece weight: 0 kg Table diameter: 800 mm Table  Ø:            600 + 800 mm Table load on 200 mm:650Kg Table load on 400 mm:200Kg Table load on 1000 mm:100Kg Rotation table:      0,076 - 1,5 ° Length:              1.200 mm  Width:               800 mm  Height:              800 mm  Weight:              500 kg 

Workpiece weight: 0 kg Table diameter: 0 mm MACH - ID 6224 Type: SEAMER SM2-2000 YOP: 1990 Rated power 60 %500 Amp Rater power 100 %400 Amp Clamping width 1600 mm Minimum product ca 180 mm Maximum product ca 960 mm ESAB Feeder A6 ESAB A10 – MED 44 ESAB LAH 500 Power supply Length3.000 mm Width1.600 mm Height2.200 mm

Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free  ...

Wave soldering machine make ATF type 20-33Year 1995, make -No: 0352330795Fluxer (spray fluxer)Compressed air consumption approx. 80 l / min depending on the setting.process width: 330 mmFluxer (foam fluxer)Compressed air consumption approx. 60 l / min depending on the setting.Process width: 330 mmMax. Flux capacity: 4.0 lMax. Foam height: 12 mmpreheatingRadiator per machine: 8Power consumption: 4.0 / 7.9 kWTemperature range Ambient temperature: -300 ° CTemperature sensor: Type J Fe-CuNisolder potPump motor: 24 V DC 1.3 AMax. Soldering temperature: 30 ° CHeating elements: 9 x 500 WHeating time approx: 2.0 hoursTemperature sensor: Type J Fe-CuNiLot quantity: 220 kgconveyor beltMax. PCB size: 335 x 420 mmDrive motor: 24 V DC 1.5 ABelt speed: 0 - 2.5 m / min.adjustable transport angle: 5 - 9 °Max. Process height: 120 mmSpecification machineDimensions approx: 1600 x 1000 x 1360 mmExtractio ...

Butt welding machine make IDEAL type AS 8Masch. -No: 127353 built in 1969Welding range in mild steel up to: 800 mm2Welding power: 40/80 kVAWelding range in aluminum: 160 mm2Max. Punching force: 25 kNRated power of the transformer: 40 kVAConnected load of the transformer: 60 kVASupply cable: 25 mm2Fuse: 125Apermissible welding frequency St. at 25/70% of the welding area: 320/120 p.h.Cooling water requirement: 150 l / hWeight approx. 1500 kgDimensions: 2000 x 1000 x 1300 mmused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Burn-butt welding machine make MÜLLER type OM-HASTU I 15/30Machine -No: 1630, built in 1982Transformer power, lasting: 15 kVATransformer power, intermittent: 30 kVAConnected load: 30 kVAOperating voltage / frequency: 380 V / 50 HzMains fuse: 80 Atr.Welding current control: 6 stagesMax. Compression pressure: 1200 daNCooling water consumption: approx. 2 l / minOperating voltage: 380 V, 50 HzExternal dimensions H x L x W: 880 x 1000 x 460 mmWeight without clamping device approx: 390 kgWith- miter clamping device and electrode jaws- separate hydraulic unit:used, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

Butt welding machine make IDEAL type AS 8Masch. -No: 1711.92 1977Welding area in unalloyed steel: 40 - 800 mm2Welding range in aluminum: 160 mm2Max. Punching force: 25 kNRated power of the transformer: 40 kVAConnected load of the transformer: 60 kVASupply cable: 25 mm2Protection: 80 Apermissible welding frequency St. at 25/70% of the welding area: 320/120 p.h.Cooling water requirement: 150 l / hWeight approx: 1500 kgDimensions: 1800 x 1500 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spot welding machine make DALEX type PMS 11/50 SMachine -No: 9641217 Year of construction 1964Rated power at 50% ED: 50 kVAConnected load: 80 kVAsec. Short circuit power: 23 KAElectrode holding force: 170-510 Kp.Operating current: 9.3 KAProjection: 360 mmDimensions: 1100 x 400 x 1500 mmWeight approx .: 418 kgWith- Electrode arm below- Bump welding table 100 x 100 above- water cooled versionWITHOUT control!used, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Foot-operated spot welding machine make DALEX type SF 25/71Mash. -No: 7798556-4Rated power: 25 kVAConnected load: 80.5 kVARated primary voltage: 380VOperating current at 50% ED: 4.4 kASecondary short-circuit current: 22.4 kAOpen circuit voltage: 1.8 - 5.2 V in 8 stepsProjection: 715 mmElectrode force: 17 - 278 daNfor sheets up to: 3 + 3 mmWelding time limit for current time: 3 - 100Space required: 450 x 1150 x 1250 mmWith- Actuation via foot lever- Welding current control in 8 stagesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Stud welding machine make HBS type Rotamat 800Machine -No: 511433 Year 2004Welding machine for welding hollow cylindrical fasteners with magnetically moved arcWelding range: M 4 - M 12Welding material: unalloyed, low-alloyed and high-alloyed steelWelding sequence: up to 20 pcs. / Min.Welding time: 5 - 990 msWelding current: 300/400/550/800 AConnected load: 380 V / 50 HzWeight approx: 48 kgOutside dimensions approx: 490 x 320 x 250 mmWith- Gas connection- Ground cable- Welding gun PMH 70 (with lift ignition)- Welding pistol A 12Performance nuts: from M 6 to M 12Welding of threaded sleeves and bushings made of steel and stainless steel possiblevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

Spot welding machine make ARO type PSM 150Machine -No: 1021 Year 1986Rated power at 50% ED 15 kVAArm distance 190 mmProjection 150 mmElectrode holding force 95 - 318 daNOpen circuit voltage 6 steps 2.1 - 4.22 VShort-circuit current max. 29.5 kAMaximum welding power 100 kVAPrimary voltage 380 V / 50 HzWith- MIG-O-MAT- Control Aro T1000C, -No: 2062335 Code ZT488662- extended special electrodes 250 mm projection- Separate control cabinet with 6 power levels- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatically operated table top welding machine make DALEX type F 82-1Year 1972Rated power 50% ED: 10 kVAContinuous power: 7.0 kVAMaximum short circuit power: 42.2 kVAMaximum welding power: 33.7 kVAConnected load: 25.3 kVANumber of control levels: 10Working stroke stepless: 40 mmElectrode force: 5 - 90 kPArm distance min./max.: 118 mmPerformance sheet steel: 2.5 + 2.5 mmPerformance brass: 1.5 + 1.5 mmPower aluminum: 1,2 + 1,2 mmPerformance round bar: 8.0 + 8.0 mmWeight approx.: 110 kgOutside dimensions approx.: 1010 x 690 x 1120 mmWith- Asynchronous four-time control unit ZG 1-2used, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regard ...

DC and AC systems for TIG welding and electrode weldingDALEX type TGKW 85 SMachine -No: 365509 Year 1980Welding power: 6 - 360 A.Continuous operation 100% ED: 360 AOpen circuit voltage: 42 VElectrode welding power: 1.0 - 8.0 mmContinuous power: 23 kVAContinuous current: 60 APower factor: 0.72Connected load: 4 x 16 mm2 CUMains fuse: 63AWeight approx: 445 kgDimensions: 1000 x 720 x 1500 mmWith- No-load voltage reduction 42 V- Control TIG 3.1- Stairs Welding current election- water cooling- TIG torch with hose packagelittle used, from an operational resolutionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: by bank transfer net or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are available for your queries every day.Best regardsM. WaldeckWAHO Machine Tools

TIG welding machine make MERKLE type TIG 253 WMachine -No: 20822Power range for DC and AC: 5 - 250 A.HSB 60% ED at: 250 ADB 100% ED at: 200 AElectrode welding operation: 1 - 5 mmOpen circuit voltage: 85 / 62VMain switch: DC / OFF / ACMode switch: TIG / electrodeSwitch: 2 clock / 4 clockPotentiometer :: Welding current, current reduction: Gas post-flow time, shaft exhaust: Equal balanceLED indicator: power ON, welding ON, faultIgnition: HF ignitionWeight approx: 198 kgOutside dimensions approx: 1005 x 510 x 775 cmWith- Hose package with burner- Gas connection with pressure gaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Comb. Inverter welding machine make REHMANN type TC 164Machine -No: 39912669 TIG / MMA / CUT CE markingPower range for welding: 10 - 160 AED at 160 A: 60%ED at 130 A: 100%Power range when disconnecting: 10 - 40 AED at 40 A: 60%ED at 30 A: 100%Power connection: 220 V / 50 HzWith- Plasma burner and hose package- TIG torch and hose package- Ground cable- Welding protection screen- Gas hose connection with pressure gaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TIG welding machine make MIGATRONIC type inverter LDH 160 HMachine -No: 92040574 Year 1992Performance data: 5 - 160 Aat 160 A: 60% EDat 135 A: 100% EDOpen circuit voltage: 70VElectrode size: 1.6 - 3.25 mmWeight approx: 18 kgCurrent connection: 380 V / 50 HzOutside dimensions approx: 470 x 170 x 260 mmWith- stepless current reduction- solid gas stream- Continuous gas aftercurrent- 2 + 4 clock operation- Anti-adhesive automatic- static arc stabilization-Liftig- Security reset- Remote Controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Portable welding transformer make VARIAMP type VC 180Machine -No: OC170491 Year 1991Technical specifications:Power range at 220 V: 60 - 130 APower range at 380 V: 60 - 180 A.ED at 220 V / 80 A: 50%ED at 220 V / 120 A: 35%ED at 380 V / 180 A: 35%Working voltage: 20 - 26 VOpen circuit voltage: 48VWeight approx: 32 kgExternal dimensions approx: 340x200x300 mmWith- Ground cable with screw clamp- Electrode holder with earth cable- Plug-in cable for 220 + 380Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

AC - DC - TIG welding machine, make CASTOLIN - EUTECTICType Castowig 200 GW, machine -No: 3704, year of construction 1990DC and AC versionTechnical specifications:Power range: 5 - 250 A60% ED at: 250 A100% ED at: 200 A.Degree of protection: IP 21Cooling method: FInsulation class: FExternal dimensions: 1100 x 530 x 800 mmWith- water-cooled version- TIG hose package with torch- Earth cable with clamps- manometer- Mobile version- TIG and stick electrode weldingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine type TIG inverter welding system gas-cooled DC system Eurotronic brand Type Porty TIG 1601 DC (i)-2 Connection voltage 1 x 230 Volt Setting range 3 - 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 400 x 240 x 360 mm Weight 10 kg Age approx. 15 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 17, 8 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Listen-Werk-Price ex stoc ...