cnc welding used for sale

table length: 2400 mm table width: 1200 mm table height: 880 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: KUKA Model: KR 5 ARC Year: 2014 Condition: Used Stock number: 9467 Control system: KUKA KR C4 Maximum arm reach: 1412 mm Number of axles: 6 pieces Maximum load capacity: 5 kg Machine weight: 127 kg The offer includes: Smart Pad Control Panel FRONIUS TransPuls Synergic 4000 water-cooled welding power unit Steel robot base Steel Fence Complete electrical installation

Siegmund Schweißtisch 16er Maße: 2000 x 1000mm Lochung 16mm Plasmanitriert Auf Rollen Inkl. Zubehör

Large basket welding machine, Fabr. Züblin = Machine data of the automatic welding machine: - Range of inner reinforcement diameter 1,465-4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view Basket production is also possible with this system

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 300 mm bore: 28 mm weight: 1670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With asortment tube holders, no power cord Auction-ID: A1-48959-162

incl. two welding robots from the manufacturer CLOOS with different welding equipment two QIROX control units one CLOOS QR-CTU-50-09 pipe welding device Load: 5000 N Torque: 1000 Nm Tipping torque: 2400 Nm Dimensional moment of inertia: 150 kg/m² Power: 2.8 kW Load: 10,000 N Four CLOOS welding machines Type: GLC 603 with two tandem burning systems on the left and a single torch on the left and two tandem torches on the right and a single torch on the right In addition, two welding fume extraction systems from the manufacturer STAUFFER, type: DB-50 2 R with a turning system, type: CLOOS QR-CTU-50-09 in portal design Portal length: approx. 14,000 mm Welding torch holder with connection flange, tandem torch ZMW-640 A-31, robot welding torch for tandem welding incl. torch cleaning unit CMR 6 T SR Robot peripherals: workpiece positioning with vertical rotational movement, vertical stroke Loa ...

De Nederman MCP Air Purification Tower (APT) is een continue filteroplossing die is ontworpen om medewerkers te beschermen tegen gevaren in de lucht in productieomgevingen. Als standalone of aanvullende oplossing vangt de APT-stof en dampen in de lucht af, filtert u deze en blaast schone lucht in effectieve luchtstroompatronen om schone lucht te behouden. Omdat de APT geen bovenleiding nodig heeft, biedt hij een handige en economische oplossing voor veel toepassingen met las- en lastige stof, waarbij afzuiging bij de bron met afzuigarmen van lokale afzuigkappen mogelijk niet praktisch of niet voldoende is om aan de regels te voldoen.

With various accessories and qualification package Auction-ID: A1-49790-1273

Device for welding plastic tubes with a diameter of 63 to 160 mm consisting of: 1 weld tube positioning device 1 machine for machining the tubes before welding (to remove the oxidized film on the surface) machining of the 2 sides simultaneously 1 Teflon disc for heating tubes before welding.

With various accessories and qualification package Auction-ID: A1-49818-1273

An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement.

Welding Table Type: Welding table Finish: Anti-corrosion paint or powder-coated finish Flatness: ≤ 0.2 mm/m Hole diameter: Ø 14 mm – 22 mm (depending on model) Standard spacing: Square grid (e.g. 100 mm x 100 mm) or rectangular pattern Maximum evenly distributed load: approx. 1,500 kg – 3,000 kg or higher Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-44

table length: 1000 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 400 kg Special item - Material thickness varies, can only be clamped with bolts 280536 or 280532. Not compatible with quick-release bolts Features: - 4 legs - Standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panels made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Holes arranged in a diagonal grid on the surface - Corners, edges, and holes are rounded - Side panel height: 200 mm - Holes in the side panel arranged in a diagonal grid - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 1100 Kg swivelling range: 360 Grad turning speeds: U/min connected load frequency: 400 V weight: 3,5 t Dimensions (LxWxH): 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 1100 Kg swivelling range: 360 Grad turning speeds: U/min connected load frequency: 400 V weight: 3,5 t Dimensions (LxWxH): 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: CLOOS Model No.: Welding robot Year: 2017 Condition: Used Stock number: 9507

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 100013501700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, ...

Industrial MIG/MAG welding machine manufactured by Omicron Svářecí Stroje s.r.o., type OMI 2550 LS, mounted on a wheeled chassis. Visible specifications: Manufacturer: Omicron Svářecí Stroje s.r.o. Model/type: OMI 2550 LS Welding process: MIG/MAG Welding range: 30 A / 15.5 V – 250 A / 26.5 V Maximum output: 250 A Duty cycle at 40°C: 250 A at 35%; 210 A at 60%; 180 A at 100% Supply: 3 × 400 V, 50 Hz Open-circuit voltage: 28 V Protection: IP21S Operational condition has not been tested or verified. Auction-ID: A7-50083-37

Heavy-duty RÖWAC CH 500 industrial welding power source with separate wire-feed unit, MIG/MAG welding torch, connection cables and hoses, mounted together on a mobile steel trolley. Specifications: Manufacturer: RÖWAC Model: CH 500 Type: Industrial MIG/MAG welding machine Welding current range: approx. 60–500 A Maximum welding current: 500 A Duty cycle: 60% at 500 A / 100% at 390 A (as indicated on rating plate) Open-circuit voltage: 80 V Input supply: 3-phase, 400 V, 50 Hz Input current: 32 A Input power: approx. 23 kVA Cooling: forced air CE marked Equipment visible / included: RÖWAC CH 500 welding power source Separate wire-feed unit with wire spool mechanism MIG/MAG welding torch Welding and connection cables Cooling/gas hoses Industrial 3-phase power connection Mobile heavy-duty steel trolley Auction-ID: A7-50083-21

DALEX PMS 10-4 & COHLINE Water Chiller DALEX, type PMS 10-4 powerful and robust industrial spot welding machine in a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition: Extremely low mileage: The built-in DALEX MPS 100 digital control system shows an original odometer reading of only 13,282 cycles! For an industrial machine of this caliber, this is as good as new and guarantees minimal wear and tear. High electrode force: This model offers a powerful contact pressure of up to 690 daN for perfect spot welds even on thicker sheets. Including cooling: Thanks to the powerful COHLINE cooling unit (5.8 kW), the machine is immediately ready for permanent industrial shift operation without overheating. Flexibility & Safety: Equipped with a key switch for easy choice between control by footswitch or the two-hand safety console. Technical  ...

Used industrial Formica ForMIG 189 MIG/MAG welding machine According to the manufacturer plate, the machine has a welding output range of approximately 25 A / 16 V to 150 A / 22 V, with a maximum output of 180 A. Rated output is 130 A at 60% duty cycle and 100 A at 100% duty cycle. Electrical supply: 400 V, 50 Hz. Wire-feed speed approximately 1–14 m/min. Protection class IP21. Operational condition has not been verified; offered in its current condition as pictured Mobile workshop configuration with wheeled chassis, control panel, welding connections, cables/hoses and industrial power plug as pictured. Auction-ID: A7-50083-25

current capacity: 25 kVA number of controlled axis: 6 workpiece weight: 10 kg weight of the machine ca.: 1550 kg Year of construction 2020 demonstration machine, as new Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Duty cycle at max.current 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy-duty RÖWAC CH 500 industrial welding power source with separate wire-feed unit, MIG/MAG welding torch, connection cables and hoses, mounted together on a mobile steel trolley. Specifications: Manufacturer: RÖWAC Model: CH 500 Type: Industrial MIG/MAG welding machine Welding current range: approx. 60–500 A Maximum welding current: 500 A Duty cycle: 60% at 500 A / 100% at 390 A (as indicated on rating plate) Open-circuit voltage: 80 V Input supply: 3-phase, 400 V, 50 Hz Input current: 32 A Input power: approx. 23 kVA Cooling: forced air CE marked Equipment visible: RÖWAC CH 500 welding power source Separate electronic wire-feed unit Integrated wire spool holder and feed mechanism Welding/connection cable package Industrial 3-phase power plug Cooling/gas hoses and connections Gas-cylinder holder Heavy-duty mobile steel trolley Auction-ID: A7-50083-22

Used industrial Omicron Svářecí Stroje OMI 305 semi-automatic MIG/MAG welding machine on integrated wheeled chassis. According to the identification plate, the machine operates from a 3 × 400 V, 50 Hz supply and provides a welding range of approximately 25 A / 15.25 V to 250 A / 26.5 V. Rated output is 250 A at 30% duty cycle, 240 A at 60%, and 200 A at 100%. Protection class: IP21. The machine features adjustable welding controls, integrated wire-feed system and main power switch. Supplied with MIG/MAG welding torch, connection cables/hoses and 400 V industrial power plug, as pictured. Operational condition has not been verified; offered in its current condition as pictured Auction-ID: A7-50083-24

Lincoln Electric Invertec STT MIG/MAG Welding System with LINC FEED 30 Wire Feeder Used industrial Lincoln Electric welding system consisting of an Invertec STT power source and LINC FEED 30 wire feeder, mounted together on a mobile steel trolley. Rated welding output is up to 225 A at 60% duty cycle and 200 A at 100% duty cycle. Suitable for 3-phase electrical supply, with the plate specifying 200/220/380/415/440 V, 50 Hz. The lot includes the LINC FEED 30 wire feeding unit, welding torch, wire-spool housing, interconnection hoses/cables, power cables and wheeled transport frame as pictured. Operation has not been verified; offered in its current condition Auction-ID: A7-50083-23

Used, functional. Hours: 1004 Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-22

Auction-ID: A1-49968-439

Used, functional. Hours: 3039 Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-21

Used, untested. Fronius TT200 & Fronius FK7. Welding torch included. Including ground clamp. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-16

Used, untested. Fronius TT200 & Fronius FK7. Welding torch included. Including ground clamp. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-17

Used, functional. Hours: 2910 Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-24

Used, untested. Fronius TT200 & Fronius FK7. Welding torch included. Including ground clamp. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-15

Auction-ID: A1-49968-440

Used, untested. Fronius TT330 & Fronius FK7. Welding torch included. Including ground clamp. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-18

Used, untested. Fronius TT300 & Fronius FK 71. Welding torch included. Including ground clamp. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-19

Used, functional. Hours: 10315 Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-23

Used, functional. Hours: 1619 Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-20

length: 1050 mm height: 1450 mm weight of the machine ca.: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mm height: 650 mm total power requirement: 3,7 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 800 x 330 x 650 mm Technical Specifications Continuously adjustable range [A] 35â270 Duty cycle (DC) at Imax. (10 min) [%] 30 (40) Welding current at 100% duty cycle [A] 160 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included accessories: - Hose set - Pressure regulator - Ground cable - Basket coil adapter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 900 mm weight of the machine ca.: 95 kg dimensions of the machine ca.: 900 x 450 x 850 mm Technical Specifications Continuously adjustable range [A] 35â250 Duty cycle (DC) at Imax. (10 min) [%] 40 Welding current at 100% duty cycle [A] 170 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included: - Hose set - Pressure regulator - Ground cable - Spool adapter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-50208-65

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low sparking formation, high duty cycle Auction-ID: A7-50065-286

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-50208-255

Input Voltage: 230V~50Hz Welding Current Range: 20-330A No-load Voltage: 60V Maximum Current Draw: 55A Effective Current Draw: 45A Duty Cycle: 40% 330A, 100% 202A Electrode Size: 1.6-4.0mm Auction-ID: A7-50066-192

Voltage 220V, inverter, output current 60 A max, never used Overall dimensions: 500 x 200 x 200 mm Weight: 2 kg Auction-ID: A7-50208-294

The inverter welding machine is used for MIG/MAG welding. The welding machine uses a high-power IGBT to transmit frequencies from 50/60 Hz to 20 kHz. The advantages of the welding machine include, among others, energy savings and the possibility of automatic correction of voltage pulsations, low sparking formation, high duty cycle Auction-ID: A7-50066-286