cnc vertical lathe used for sale

Diameter approx 2250mm, total height approx 5400mm. Auction-ID: A1-50393-99

Equipped with 400Volt agitator at the bottom, diameter approximately 1400mm, total height approximately 4100mm. Auction-ID: A1-50393-95

Air receiver capacity: 200 lt, Air intake capacity: 400 lt/min, Motor power: 2,2 kW / 3 HP, Voltage: 400 VAC / 3 phases, Working pressure: 8 bar, Air compressor pump: B3700. Auction-ID: A1-50595-9

Capacity 65,000L, Equipped with snuff valve, bottom outlet and sight glass on 8 legs Auction-ID: A1-50393-64

Vertical packaging machine (VFFS) with servo drives and Videojet printer, This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film., The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own tempe ...

Key data: 635 mm, 510 mm, 460 mm

Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Engine No.: 1537000170A Year of Make: 2009 Control: Siemens 810D Shopmill Axles: 3 Travels X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 places SK 40 Speed: 20-8,000 rpm Drive power: 13/9 kW (40/100%ED) - Direct displacement measurement system X,Y,Z - Sealing air for measuring systems - Coolant blowing air switching - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.

The machine is in good technical condition; it can be tested by prior arrangement.

Ilapak vertical bag fill-, form-, and seal machine, model: Vegatronix 2000/400, diameter filling pipe: 170 mm, vertical seal length: 400 mm, horizontal seal length: 400 mm, mesh bag width: 600 mm, plastic belt, belt width: 300 mm, elevating height: 700 mm, total dimensions: 3900 mm x 1640 mm x 1870 mm.

Equipped with side-mounted motor with agitator, cooling coil, snuff valve, bottom outlet and sight glass on 8 legs Auction-ID: A1-50393-62

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-53

Diameter approx 2250mm, total height approx 5400mm. Auction-ID: A1-50393-98

Diameter approx 3100mm, total height approx 4750mm, equipped with agitator Auction-ID: A1-50393-79

Can be dismantled by the customer up to extraction. Wooden chest of drawers containing milling heads not included. Auction-ID: A1-50226-5

Equipped with: has a table of 1350 × 320 mm, a longitudinal travel of 700 mm, a transverse travel of 240/260 mm, a vertical travel of 370 mm, 18 spindle speeds of 31.5–1600 rpm, a main motor of 7.5 kW, a number 3 spindle cone, a spindle bore of 29 mm, a swivel range of ±45°, a maximum workpiece weight of 250 kg Auction-ID: A1-47365-10

Equipped with liquid-heated/cooled jacket on the lower part of the tank, diameter approximately 3550mm, total height approximately 5500mm. Auction-ID: A1-50393-76

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-59

Capacity 65,000L, Equipped with snuff valve, bottom outlet and sight glass on 8 legs Auction-ID: A1-50393-63

Equipped with cooling coil, snuff hole, agitator and sight glass, Including 1x cooling installation (decommissioned), diameter per tank approximately 3300x total height approximately 6000mm Auction-ID: A1-50393-85

Equipped with 400Volt agitator at the bottom, diameter approximately 1400mm, total height approximately 4100mm. Auction-ID: A1-50393-94

Capacity 12,500L, equipped with bottom outlet and sight glass on 5 legs Auction-ID: A1-50393-67

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-57

Diameter approx. 1650mm, total height approx. 4800mm. Auction-ID: A1-50393-75

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-54

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-50711-30

Diameter approx. 2600mm, total height approx. 5550mm., without piping. Auction-ID: A1-50393-77

Capacity 12,500L, equipped with bottom outlet and sight glass on 5 legs Auction-ID: A1-50393-66

Diameter approx. 1700mm, total height approx. 3150mm. Equipped with agitator. Auction-ID: A1-50393-96

New Anthracite Double-Leaf Vertical Slat Gate A modern and durable double-leaf gate manufactured from high-quality steel profiles, finished in an elegant anthracite color. The vertical slat (comb-style) design ensures both aesthetic appeal and structural strength, making it suitable for residential and commercial applications. Specification: Gate type: double-leaf, vertical slat (comb-style) Leaf construction: steel profiles 60 mm ×40 mm Posts: 100×100 mm, height 2 200 mm Finish: anthracite (powder-coated) Included: 2 × gate leaves 2 × steel posts 4 × adjustable hinges 1 × gate stop Packaging: The gate is securely packed on a wooden pallet and prepared for safe transport. Auction-ID: A1-50711-51

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-55

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-58

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-56

Equipped with side-mounted motor with agitator, cooling coil, snuff valve, bottom outlet and sight glass on 8 legs Auction-ID: A1-50393-61

Dimensions per piece approximately 1600x2100x4900mm, without piping Auction-ID: A1-50393-97

Suitable for empty boxes up to approximately 40x30cm. With control cabinet, without upper roller conveyor between standing columns, otherwise complete, with supply belt. Consists of two lifts (seen in photos) and frame 6000 mm height 1000mm width 1000mm length Auction-ID: A1-47393-359

Diameter approx. 2600mm, total height approx. 5550mm., without piping. Auction-ID: A1-50393-78

Diameter approx. 1650mm, total height approx. 4800mm. Auction-ID: A1-50393-74

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-52

UVA Packaging Newton 400 Vertical Packaging Machine – 2003 Industrial automatic vertical form, fill and seal machine (VFFS), suitable for packaging products in foil bags. Specifications: Brand: UVA Packaging Model: Newton 400 Year of construction: 2003 Machine number: 2003 511 Connection: 400 V, 3-phase, 50/60 Hz Power: 15 kVA Compressed air consumption: 600 Nl/min Control: Siemens MP 377 12\" touchscreen Production capacity: up to approximately 120 bags/min Bag width: approx. 100–400 mm Maximum bag length: approx. 600 mm Maximum film width: approx. 840 mm Maximum film roll diameter: approx. 700 mm Version: Equipped with automatic film feed, product feed via upper hopper, sealing mechanism, output belt, control cabinet, pneumatic components and transparent safety guard. CE marked, produced in the Netherlands. Capacities and pack sizes are indicative based on the mod ...

x-travel:800 mm y-travel:410 mm z-travel:510 mm control:Fanuc 10 MA rapid travel x/y/z:20/20/15 mm/min table surface area:1100 x 450 mm tool taper:BT 40 tool magazin::30 BT 40 max. tool length:250 mm max. tool weight:8 kg power requirement:7,5/5,5 kW turning speed range:6000 1/min weight of the machine ca.:6,3 t Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup"

x-travel:1100 mm y-travel:600 mm z-travel:510 mm control:Heidenhain iTNC 530 table-size:1050 x 600 mm table load:500 kg spindle taper:SK 40 turning speeds:10000 1/min power capacity at 100 % load:9 kW rapid travel x/y/z:24 m/min feed:24 m/min Tool changer:40 SK 40 dimensions of the machine ca.:4,3 x 2,6 x 2,25 m weight of the machine ca.:8,8 t POS mill 1100 vertical machining center in very good condition from 2009 Options: - parts measuring M&H receiver without probe - external hand wheel Heidenhain HR 410 - Air supply through spindle - air gun - paperfilter system with coolant through spindle 40 bar -

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

x-travel:800 mm y-travel:400 mm z-travel:350 mm total power requirement:44 kW weight of the machine ca.:8,8 t dimensions of the machine ca.:6,1 x 4,1 x 3,3 m tool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St. rotary table diameter:1340 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine

max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

turning diameter:1000 mm swing diameter:1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed range I: 5 - 350 rpm. Speed range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis