137,345 used machines on RESALE, but how to find them? Machine Search
CNC vertical machining center Type: SV 1150 Manufacturer: Akira-Seiki Year: 2011 Control: Mitsubishi M700 Hours: 18427 X: 1150 mm Y: 640 mm Z: 750 mm Table size: 1300 x 600 mm Spindle speed: 10,000 rpm Spindle taper: SK40 Tool magazine: 36 positions Tool and work probe Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment.
Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !
turning diameter: 376 mm turning length: 760 mm control: FANUC I-Series Plus greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 4000 U/min spindle drive motor: 22 / 15 kW spindle nose: ASA A2-8 spindle bore: 81 mm bar material dia.: 76 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 12 St. travel -x axis: 260 (72 + 188 ) mm travel -z axis: 830 mm travel -y axis: 105 (+/- 52,5) mm diameter of quill: 100 mm quill stroke: 100 mm tailstock taper MT: MT 5 total power requirement: 41,98 kVA weight of the machine ca.: 6,1 t dimensions of the machine ca.: 4,0 x 2,5 x 2,2 m CNC control FFANUC I-Series Plus - chip conveyor - driventools 5000U/min, 7,5kW - C-axis - hydraulic unit - tailstock - coolant 7 bar - bar loader interface Capto C3 straight chair: 2 Capto C3 90° chair: 1 ER20 Capto chuck: 10 ER ...
Inv. Num. : 9085 Type: KMX XL 32 Producer: Manurhin Created: 2003 Parameters: Maximum turning length: 330 mm Max. turning diameter: 33 mm Length: 3850 mm Width: 2000 mm Height: 2100 mm Weight: 6000 kg
Inv. Num. : 9089 Type: CT 40/1000 Producer: Gildemeister Created: 1991 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 225 mm Spindle diameter: 56 mm Weight: 3200 kg Equipment: Chip conveyor Tailstock Spare parts Shovel Powered tools
Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.
serial number: 10970000633 control: 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control: 67 10.221.661 x-travel: 600 mm y-travel: 700 mm z-travel: 550 mm spindle: SK40 - neu - 380 Std. : spindle speed:: 12.000 U/min automatic swivel milling head: tool change unit: 30 Plätze : Infrarot-Taster : : : : 600 L : : : : 40 bar : mode of operation: 3 + 4 : : MillPlus IT flushing gun: mit Pumpe : Durchmesser 630 mm T-slots: 9 T-Nuten 14 H7 / 63 mm capacity: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 2300mm/800mm/600mm, table dimensions X/Y: 1400mm/750mm, rotary table dimensions X/Y: 800mm/630mm, spindle speed: 12000rpm, tool positions: 30, tool holder: SK40, coolant pressure: 20bar, feed rate: 30m/min, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6200mm/3700mm/3600mm, weight: approx. 16000kg, control: Heidenhain iTNC 530, control hours: 63330h, machine hours: 61892h, operating hours: 28295h. Including internal coolant supply, 3D measuring probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.
AJAN SHP 130 plasma cutting machine was built in 2021 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine is used for precise cutting of a wide range of materials with a maximum thickness of 20 mm. The machining process is performed fully automatically, according to a pre-programmed cutting path. The plasma torch is powered by a powerful plasma source of the highest energy efficiency. The AJAN SHP 130 is distinguished by a stable work table with a length of 3000 mm and a width of 1500 mm and an integrated fume extraction system. This system effectively removes any contamination generated during machining, providing a high level of safety and comfort when using the machine. All necessary cutting parameters are programmed in the advanced CNC controller with menu in Polish. The operator also has at his disposal CAD/CAM software with an automatic nesting function, whic ...
CNC Shearing Machine manufactured in 2022. This Durma SBT 4006 features a cutting length of 4,100 mm and a cutting capacity of 6 mm thickness. It is equipped with a DURMA DT-7 CNC control system for precise operation. If you are looking to get high-quality shearing capabilities, consider the Durma SBT 4006 machine we have for sale. Contact us for further details.
MIKRON VCP 800W Duro CNC vertical machining center was built in 2004 in Switzerland by Mikron Comp-Tec AG. The machine is designed for precise machining of steel, aluminium and the production of moulds and tools. The machining process is performed by means of a reliable spindle and precision cutting tools. The spindle, driven by a powerful motor, rotates at a maximum speed of as much as 20000 rpm, ensuring rapid machining while maintaining high efficiency at the same time. Inside the fully illuminated workspace, there is also a large work table with T-slots for easy workpiece and tooling mounting. All this is complemented by an advanced HEIDENHAIN iTNC 530 CNC control with an intuitive interface and an access to many advanced functions. The MIKRON VCP CNC machining center weighs 9120 kg. The MIKRON VCP 800W Duro is offered with an extensive range of equipment, including, among others, ...
The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production
The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories
CNC lathe Type: Style 510 Manufacturer: Style Year: 2021 Control: STYLE 2021 Turning Edition Swing over bed: 510 mm Swing over cross slide: 300 mm Center distance: 1350 mm Bed width: 330 mm Main motor power (S6): 11 kW Spindle bore: 80 mm Max. weight between centers: 750 kg Maximum spindle speed: 2500 rpm Spindle nose: D1-8 X and Z Axes Rapid traverse: 8 m/min Feed rate range: 2 m/min Tailstock Quill diameter: 80 mm Quill travel: 160 mm Quill taper: MT5 (Morse Taper 5) Turret: 8-position Machine in very good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx. 30kg. Documentation available. An on-site inspection is possible.
x-travel: 750 mm y-travel: 210 mm z-travel: 1150 + 100 mm control: Fanuc MSX-701III Maximum turning diameter: 660 mm Max. turning length: 1498 mm Diameter over cross slide max.: 400 mm number of spindle speeds: 3000 U/min tool piece magazine with: 40 Plätzen turret: 10 Fach total power requirement: 90 kVA weight of the machine ca.: 26,6 t dimensions of the machine ca.: 5301 x 2997 x 2788 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Siemens C 200 – 4D Turning diameter: 100 mm Turning length 280 mm 8-fold revolver with applied revolver Wkzg. 6-fold revolver with applied revolver Wkzg. Spindle speed 6000 min-1 Max. bar passage 60 mm Rear drilling unit for 5 stations Chip conveyor Knoll Coolant system
Key data: 254 mm, 500 mm, 3600 1/min
Stock number: 3967 CNC LATHE Manufacturer: HYUNDAI, Type: HIT 18S Machines NO.: 34156066, Year of manufacture: 1998 Specifications: Max. circulation diameter 254 mm dia. Turning length 500 mm Main motor power 15 kw Main spindle speed range 3600 rpm Spindle bore 75 mm dia. X axis movement 180 mm Z ash movement 510 mm Tool turret 1 with 8 stations Control Siemens 840C Fabr. Controlled in X-Z axes Accessories: Hydr. Chuck main spindle mm dia Various tool holders. Chip conveyance. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg
Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.
The machine is in good technical condition, testing is possible by prior arrangement.
The machine is in good technical condition, testing possible after prior agreement. Swing diameter over bed: 630 mm, max. turning diameter: 350 mm, max. turning length: 870 mm, spindle passage 52 mm.
Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg
This 4-axis Felder Format4 H100 CNC processing center was manufactured in 2025. It features a spacious table size of 3100 x 2100 mm and includes a 16-position linear tool changer, 12 vertical drilling spindles, and a groove saw. If you are looking to get high-quality CNC machining capabilities, consider the Felder Format4 H100 machine we have for sale. Contact us for further details.
This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual 0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details.
CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 In 2026 control replacement for Heidenhain TNC 530 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Spindle diameter: 130 mm Spindle taper: ISO 50 Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines
DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)
A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible.
Oxy-fuel cnc cutting machine. Prestine condition.
A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible.
turning diameter: 430 mm turning length: 1500 mm control: OSP P300 turning diameter over bed: 670 mm turning dia. over face-slide: 480 mm Workingspindle:: power capacity - main spindel: 30/22 kW turning speed range - main spindle: 0 - 3000 U/min max. bar capacity: 95 mm spindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 30 m/min travel -x axis: 270 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 25 m/min C-Axis: 0,001 ° Rapids C - Axes: 200 min -1 rapid traverse: 12 m/min travel -y axis: 120 mm total power requirement: 29 kVA weight of the machine ca.: 8,6 t dimensions of the machine ca.: 4,3 x 2,25 m CCNC turning and milling center equipped with: - CNC control OKUMA OSP P300 - 12-fold Tool Revolver for driven tools - Tailstock - Chip conveyor - self-centering Chuck 315 mm Autoblock - 2 motorized radial modules - 2 axia ...
CNC punching machine manufactured in 2001. This Salvagnini S4-40 features a maximum sheet size of 4064 x 1524 mm and can process materials up to 5 mm thick, including mild steel and aluminum. It includes a versatile H-type punching head with multiple stations for efficient operation. If you are looking to get high-quality punching capabilities, consider the Salvagnini S4-40 machine we have for sale. Contact us for further details.
turning diameter: 256 mm turning length: 530 mm control: Fanuc 31i-A turning diameter over bed: 550 mm turning diameter over cross slideways: 350 mm main spindle:: max. turning speeds: 6000 min/-1 Drive power - main spindle: 11 kW max. torque: Nm max. rod diameter: 45 mm spindle head: A2-5 chucking diameter: mm tool turret:: shaft height for square tool: 25 mm Drill shank diameter: 50 mm travel:: x-axis: 210 mm z-axis: 560 mm feeds:: rapid traverse: x 20 / z 24 m/min total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 m Technical Specifications: - Manufactured in 2017 but not put into operation until 2021 - Fanuc 31i mod A CNC control - Y-axis - 20 bar tool cooling - Fedek bar loader - Chip conveyor - 12-station tool turret - 10 rotating tools The data for this ad was created with ModulMWS - the software solution o ...
CNC lathe Type: T1 Manufacturer: DMG MORI Year: 2023 Control: Siemens Sinumerik One + JobShop and ShopTurn Swing over bed: 550 mm Swing over support: 320 mm Max. turning diameter: 300 mm Diameter of clamping chucks – main spindle: 210 mm X: 232.5 mm Z: 410 mm Rapid traverse X/Z axes: 30/36 m/min Spindle nose: A2-6 Inner diam. of front bearing: 120 mm Spindle bore: 73 mm Max. diam. of machined bar: 65 mm Max. spindle speed: 4500 rpm Turret VDI: 12 positions Number of driven tool stations: 12 Max. speed: 5500 rpm Hydraulic tailstock Automatic tailstock travel range: 410 mm Tailstock sleeve taper: MK 4 Chip conveyor Machine weight: 3400 kg In very good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
centre height: 400 mm centre distance: 3.000 mm max. swing over bed: 810 mm max. swing over facing slide: 510 mm max. swing-dia. in gap: 850 mm control: WEILER max. workpiece weight: 3.800 kg spindle diameter in front bearing: 150 mm spindle bore: 106 mm faceplate diameter: 630 mm worktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mm spindle turning speed - stepless: 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - ...
CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32
CNC - Bearbeitungszentrum Fabrikat: COMEC Typ: MD TOP XL Die ideale Lösung für CNC - Bearbeitungen an schmalen, komplizierten Werkstücken COMEC macht´s Ihnen einfach Kopfkonfigurationen individuell konfigurierbar für: - Sägen mit 360 Grad - Achse - Fräsaggregate für horizontale und vertikale Bearbeitungen - Bohrköpfe mit einzeln abrufbaren Spindeln vertikal und horizontal - Mehrspindelreihenbohrköpfe einzeln abrufbar auch horizontal - Horizontalfräsaggregat mit 360 Grad C - Achse Speziell entwickelter Spanntisch, verfährt in X - Richtung automatisch programmgesteuert Individuelle Ausstattung möglich, zum Beispiel: Grundrahmen Schwerer Grundmaschinenständer, Elektroverschweißt. Maximale Werkstückgrößen: X-Achse 3350 mm (oder 1500 + 1500 mm in zwei Arbeitsfeldern) Y-Achse 200 mm Z-Achse 180 mm Verfahrbarer Aggregateträger 3 ...
x-travel: 6500 mm y-travel: 1500 mm z-travel: 2000 mm control: HEIDENHAIN iTNC 530 HSCI total power requirement: kW weight of the machine ca.: 58 t dimensions of the machine ca.: 14,5x7 m The ANAYAK HVM-65 traveling column milling machine stands for high rigidity, precision and machining performance. Equipped with a Heidenhain iTNC530 HSCI control, this CNC milling machine is ideally suited for demanding heavy-duty machining applications. The proven traveling column design with a fixed distance between column and spindle axis ensures consistent accuracy across the entire working range. The cross movement is performed by the column, eliminating the need for a contoured foundation. The orthogonal milling head with 28/42 kW power output reaches speeds of up to 6,000 rpm and features a precise 0.02° x 0.02° indexing resolution. The rigid auxiliary table offers a large clamping surface of 7 ...
CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...
turning diameter: 100 mm turning length: 75 mm control: FANUC Oi-TF total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm
CNC boring- routering machine Brand: Vitap Type: K3 New machine Throughfeed process from the bottom and automatic panel return to the operator. Develop a new individual class: - With this machine you can do grooves and drill processings as well as different milling works, from simple edge milling to the milling of forms and letters. - There are no limits for your creativity Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position or just via click on the virtual workpiece Vitap Bar Nesting - efficient and time saving - This patent ...
CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular
Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t
New CNC Maschine Brand: Comec type: MD JAMB CNC machining center for complete machining of a wide range of door frames. 3 machining supports for cutting to length on miters, milling for corner connectors and door lock panels. A complete door frame element with decorative cladding and rebate cladding is machined in one set-up. A complete frame can thus be machined in approx. 2.5 - 3 min. Machining equipment can be individually adapted to the customers requirements.
CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch Pro With surface copying function with floating bell GX1 or GX2 or GX4 Max. drive speed 18,000 R.P.M Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 20 Nm Tool interface: modular for ER 25, ER 32, saw flange, shrink- fit chuck
maximum number of results exceeded
please refine your search
