cnc turret punch used for sale

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Stamping dimension: see photo with dimensions -Socket: Ø 40 mm -Dimensions: 370/270/H275 mm -Weight: 67 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaws -Quantity: 27x punch clips as shown in the pictures -Price for: all 27 pieces -Manufacturer: CEWE JOKA Raskin -various types -Transport dimensions: 590/640/H470 mm -Weight: 190 kg

Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.

4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA -Quantity: 2 pieces -Price per piece -Dimension: 237/35/H140 mm -Weight: 3.9kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Beading tool, punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool with: bending function -Admission bolts: 50 mm -Dimensions: 495/495/H430 mm -Weight: 282 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 column punching tool -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg

Punching machine, pneumatic punching machine, punching device, hole punching machine -Insert tool -for small stamping jobs -Control: pneumatic -Dimensions: 610/660/H1200 mm -Weight: 75 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -4 pillars: punching tool -Take bolt: 40 mm -Dimensions: 340/300/H235 mm -Weight: 72 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Take bolt: 40 mm -Dimensions: 255/205/H210 mm -Weight: 25 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm -Weight: 132 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1998 -Type: 270164-1

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm -Weight: 94 kg

max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaw -Ironing material: Aluminum -Punch dimensions: see photo with dimensions -Quantity: 2 pieces -Price: per piece -Dimensions: 240/145/H210 mm -Weight: 22.5 kg/pc.

Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg