135,571 used machines on RESALE, but how to find them? Machine Search
pressure: 20.0 t chamfer lenght: 850 mm distance between columns: 850 mm back stop - adjustable: 375 + 400 mm stroke of upper beam: 196 mm dayligth: 470 mm ajustment speed: 200 mm/sec table height: ca. 900 mm total power requirement: 5.0 kW weight of the machine ca.: 2500 kg New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - https://www.youtube.com/watch?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of di ...
pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm table width: 120 mm table height: 900 mm column arm: 320 mm return speed: 100 mm/sec working feed: 10 mm/sec control: Cybelec DNC 70 quantity of oil: ca. 250 l total power requirement: 11 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille) Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 120 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 90.0 mm oil volume: 230 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 10500 kg range L-W-H: 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAU ...
pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1900 mm y-travel: 800 mm z-travel: 800 mm Control: control: 426 Heidenhain : dismantled: total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Heidenhain TNC 355 x-travel: 1.000 mm y-travel: 400 mm z-travel: 450 mm surface area: 1.300 x 400 mm feed range: 1 - 6.000 mm/min number of spindle speeds: 60 - 3.600 U/min vertikal number of spindle speeds: 30 - 1.800 U/min horizonta spindle taper: SK50 vertical and horizontal milling possible: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a WALTER 5-axis CNC tool grinding machine for the production and resharpening of rotationally symmetrical cutting tools such as drills, milling cutters, reamers and special tools. Travels X/Y/Z: 400mm/250mm/580mm, C-axis swivel range: +/-200°, A axis: 360°, rapid traverse X/Y/Z: max. 15m/min, linear axis resolution: 0.0001mm, center height range: 130mm-165mm, max. workpiece diameter: 190mm, workpiece mounting: ISO 50, spindle motor power: 4.4kW, grinding spindle speed: 6000rpm, spindle diameter: 70mm, max. grinding wheel diameter: 200mm, control: WALTER HMC 400. Overall dimensions X/Y/Z: approx. 1420mm/2010mm/2150mm, weight: approx. 3100kg. An on-site inspection is possible.
grinding diameter: 350 mm grinding length: 1000 mm centre height: 180 mm Control: Fanuc 180-T grinding wheel diameter: 450 mm grinding wheel width: 80 (100) mm power capacity - grinding motor: 7,5 kW table speed -stepless-: 10 m/min grinding spindle head - swivable: +5 / -180 ° turning speed range - workpiece spindle: 10 - 800 U/min grinding head swivelling: 0 - 15 ° workpiece weight max.: 120 kg taper in tailstock-quill: MK 4 tailstock quill stroke: 35 mm dressing device: voltage: 400 V total power requirement: 18 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,75 x 2,25 x 1,80 m band filter unit: 1,75 x 1,20 x 0,80 m - Serial No.6769 - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 6200 mm y-travel: 1500 mm z-travel: 508 mm Control: Mazatrol type: M 32 workpiece height: 708 mm Tool changer: 60 spindle taper ISO: 50 table surface area: 6200x750 mm total power requirement: kW weight of the machine ca.: t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain turning speeds: 3150 U/min table surface area: 700x350 mm Table load: 400 kg spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solutio ...
working length: 8000 mm working width: 3500 mm Power: 300 A Plasma source: Nertajet type: HP 300 CNC burner heads: 1 1 head Plasma 1 head Autogan The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 10000 mm y-travel: 1100 mm z-travel: 1700 mm Control: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mm chip conveyor: universal head: table height over floor: 800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The machine has been completely overhauled. Capto C6 milling chuck Double prism lathe chuck The machine has many optional accessories that can be purchased separately. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms ...
used
x-travel: 800 mm y-travel: 650 mm z-travel: 550 mm control: Heidenhain Millplus tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serial Number: 71201389 with angle table 900 x +640 25-station tool changer magazine Coolant treatment Interior lighting The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad ...
Mikron UME 600 - Vertical Machining Center Mount: SK40 X/Y/Z: 600 / 500 / 450 mm - Heidenhain TNC 407 CNC control - SARA UC1 SD3 Air Purifier - Coolant device - Chip conveyors - Year of construction 1997 Technical data - Spindle holder: SK40 - X-axis travel: 600 mm - Y-axis travel: 500 mm - Travel Z-axis: 450 mm - Feed range: 0 - 10000 mm/min - Spindle speed: 5 - 5000 rpm - Quill stroke: 90 mm - Table size: 900 × 530 mm - Spindle power: 6 kW - Total power requirement: 9 kW - Operating voltage: 400 V - Space requirement with control & extraction WxHxD: 3500 x 3000 x 3500 mm - Dimensions without control & extraction WxHxD: 2400 x 2100 x 2700 mm - Total weight: approx. 3400 kg
A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.
A Unisign CNC 5-axis large-format portal milling machine is available. Portal clearance height: 1200mm, tool stations: 35/53, tool interface: SK50, travel X/Y/Z: 10000mm/2000mm/800mm, table dimensions X/Y: 11750mm/1670mm, max. table load: 2500kp/m², max. table-to-spindle nose distance: 1200mm, main spindle power: 26kW, spindle speed: 6000rpm, feed rate: 24m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 14000mm/5800mm/4000mm, weight: approx. 45t, control: Siemens Sinumerik 840C. Including automatic angular milling head coupling and decoupling, spindle orientation system, rigid tapping, through-spindle coolant, workpiece probing system and two-station pendulum operation. Documentation available. An on-site inspection is possible.
Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspec ...
high-speed CNC machining center Type: HSC 300/3 Manufacturer: Exeron Year: 2019 Control: Heidenhain iTNC 640 Spindle hours: 9500 X: 525 mm Y: 340 mm Z: 355 mm Max spindle speed: 42000 rpm Max table load: 500 kg Clamping table size: 400 x 470 mm HVC140 HSK-E40 milling spindle – S1/S6 40% milling power: 10 kW/13 kW. Ceramic ball bearings with minimal oil and air lubrication. Tool magazine with 16 positions for HSK-E40 tools, with a diameter of up to 16 mm and a maximum length of 75 mm. Blum laser tool measurement, located on the left side, including a tool damage control system. Rotating tools with a diameter of 0.2 to 16 mm are measured directly in the machine working area. The minimum tool length is 45 mm. Graphite extraction system including preparation of the machine for extraction. Air flow rate approx. 1,400 m³/h. Motor power 2.2 kW, noise level approx. 73 dB(A) ...
Basic machine data Used 3-axis CNC tool milling machine from DECKEL Make: DECKEL Type: FP3-50 Year of Make: 1995 Condition: Very good – machine comes from test facility Control: Name: DIALOG 112 Handwheel Travel: x-axis: 500 mm // y-axis: 400 mm // z-axis: 500 mm Technical data: • Spindle: 0-5000 rpm • Table: 800 mm x 480 mm • SK40 interface • Quill • Cabin • Ideal for training Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible.
A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible.
Manufacturer: MAHO Model: MH 600 E Year: 1989 Condition: Used Stock number: 9361 Work table length: 740 mm Work table width: 440 mm Maximum table load (even): 250 kg Maximum vertical spindle speed: 4000 1/min X-axis travel: 600 mm Y-axis travel: 450 mm Travel Z axis: 450 mm Cone: ISO 40 Machine height: 2000 mm Machine length: 3200 mm Machine width: 2500 mm Machine weight: 3800 kg
A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: ap ...
PRIMINER DELTA CENTER V6L CNC vertical machining center was built in 2017 in China by PRIMINER MACHINE TOOLS DONGGUAN CO., LTD. PRIMINER DELTA CENTER V6L CNC vertical machining center was built in 2017 in China by PRIMINER MACHINE TOOLS DONGGUAN CO., LTD. The machine has been regularly serviced and maintained. Throughout its service life, the following work has been carried out: – spindle reconditioning 12.2023 – regular replacement and topping up of oil and coolant in accordance with the manufacturer’s recommendations (tool magazine, spindle cooling system) – inspection of individual components – cleaning of filters – levelling of the machine – inspection of the machine’s geometry – inspection of clearances and their adjustment on gearboxes – calibration of measuring probes – creation of a backup copy of the control syste The machine is designed for mac ...
A Primacon CNC high-precision vertical machining center for machining small workpieces in the medical sector is available. Axis travels X/Y/Z: 240mm/240mm/240mm, table dimensions X/Y: 350mm/300mm, max. table load: 60kg, spindle speed: 40000rpm, tool holder: HSK-25, feed rate: 12m/min, rapid traverse: 12m/min, positioning accuracy: +/-0.001mm, repeatability: +/-0.0005mm. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/2200mm, weight: approx. 1000kg, control: Heidenhain. The spindle is occasionally not clamped correctly during the tool change process. The ventilation hose of the Z-axis rubs against the A-axis block. Documentation available. An on-site inspection is possible.
A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible.
Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.
X-axis travel: 700 mm, Y-axis travel: 550 mm, Z-axis travel: 500 mm, spindle speed: 25 to 4200 rpm, three speed ranges, feed rate: 1 to 5000 mm/min, rapid traverse in X, Y and Z: 10 m/min, vertical quill travel: 95 mm, clamping table dimensions: 1000 x 500 mm, spindle motor power: 12 kW, connected load: 18 kW, control system: Heidenhain TNC 355, length: 4260 mm, width: 4400 mm, height: 2300 mm, weight: 3.5 t, operating hours: 31,248 h. The machine is equipped with an SK40 tool spindle in accordance with DIN 2079, a swivelling spindle head, a spindle head that can be swung away for machining with the horizontal spindle, an outboard support for horizontal machining, direct measuring systems, a coolant system with a 100 litre reservoir, approximately 38 tool holders, most of which are fitted with tools, a table with tool holders, a workbench with cabinet, various hand tools, various clampin ...
: neu : 2025 : 080091 : prompt, Zwischenverkauf v : Türkei : 51120 € : 966.17 € : 1 : 60 to : 2550 mm : Y1 / Y2 und X Achse : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 120 mm/s : 9 mm/s : 70 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table interm ...
Offered for sale is a WaldrichSiegen CNC portal milling machine for horizontal and vertical milling as well as drilling of large workpieces. Table travel: 14000mm, crossrail saddle travel: 4500mm, crossrail travel: 4000mm, quill travel: 450mm, positioning accuracy of table/crossrail saddle/crossrail/quill: 0.05mm, distance between columns: 4545mm, distance from table to spindle: 4000mm, table size/clamping surface X/Y: 14000mm/4350mm, main spindle motor power: 125kW, main spindle tool interface: ISO SK60, max. table load: 200t, max. point load: 10000kg, control: Siemens 840D, measuring systems: Heidenhain, axis drives: Siemens/Dornhoff. Including an angle-adjustable universal milling head, angle milling heads with installation heights of 800mm/850mm/1400mm, a 1400mm work spindle extension, adapter plates for the work spindle with 400mm/220mm and chip conveyors on the left/right below flo ...
Traub TNX 65Year of manuf. : 2011 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Ejector:Hydraulic with flushToolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier II (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier III (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 ...
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 252800 € : 600 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3100 mm : 410 mm : 700 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 280 l : 5750 mm : 2500 mm : 4000 mm : 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transp ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 69320 € : 1310.15 € : 100 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 900 mm : 104 mm : 11 kW : 4200 mm : 1670 mm : 2850 mm : 8500 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC CONTROLLED CROWNING TABLE ...
Key data: 45 t, 2000 mm
Manufacturer: Gasparini Model No.: PBS 045 Year: 2000 Condition: Used Stock number: 9391 Compressive force: 45 t Maximum bending length: 2000 mm Machine weight: 3450 kg
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 202100 € : 3869.08 € : 320 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 1100 mm : 154 mm : 160 l : 7500 mm : 1910 mm : 3350 mm : 29000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and ...
Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. ...
Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...
A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 57920 € : 1094.69 € : 60 to : 2050 mm : 3 (Y1, Y2, X) : 265 mm : 1700 mm : 450 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 110 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 7.5 kW : 3200 mm : 1550 mm : 2850 mm : 5600 kg : 650 mm 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double l ...
: neu : ca. 4-6 Monate ab Auftrag : Türkei : 231900 € : 400 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 630 mm : hydraulisch : 150 mm/s : 9 mm/s : 150 mm/s : 750 mm : 160 l : 7500 mm : 2110 mm : 3810 mm : 34600 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DX ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 159300 € : 3010.77 € : 320 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 5300 mm : 1910 mm : 3230 mm : 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 100920 € : 1907.39 € : 220 to : 4050 mm : Y1 / Y2 / X Achse : 265 mm : 3600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 5250 mm : 1770 mm : 3000 mm : 14750 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...
x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: 83,2 t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Work ...
pressure: 80.0 t chamfer lenght: 2550 mm distance between columns: 2130 mm column arm: 420 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec stroke: 200 mm dayligth: 470 mm table width: 60.0 mm table height: 910 mm Number of working hours: ca. 37.102 h total power requirement: 9.0 KW weight of the machine ca.: 5750 kg range L-W-H: 3100 x 2180 x 2540 mm good / well-maintained condition () - Inspected condition - Machine video - https://www.youtube.com/watch?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools ...
pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm ajustment speed: 90.0 mm/sec working feed: 10.0 mm/sec return speed: 75.0 mm/sec stroke: 140 mm dayligth: 375 mm column arm: 250 mm table width: 90.0 mm work height max.: ca. 950 mm Number of working hours: 14.100 h total power requirement: 13.5 kW weight: 8500 kg range L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library - CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled g ...
pressure: 80.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 250 mm table width: 85.0 / 135 mm stroke: ca. 390 mm dayligth: ca. 585 mm ajustment speed: 180 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec work height max.: 1050 mm Number of working hours: 32.495 h oil volume: 200 l operating pressure: 320 bar total power requirement: 11.6 KW weight of the machine ca.: 7300 kg range L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake MADE IN GERMANY () - CYBELEC CNC control ...
pressure: 50.0 t chamfer lenght: 1275 mm distance between columns: 1040 mm column arm: 250 mm ram stroke speed: 225 mm/sec work speed: 0 - 9.8 mm/sec return speed: 160 mm/sec work stroke: 215 mm dayligth: 512 mm table height: 800 mm back stop - adjustable: 600 mm control: DELEM DM 51 operating pressure: max. 300 bar oil volume: 150 ltr. voltage: 400 V engine output: 6.0 kW Weight: 4300 kg range L-W-H: 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=5L8L2AYv0PU ------------------------------------------------------- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • W ...
sheet width: 3050 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm : 8.00 mm down holder: 10 Stück cutting angle: 0°40 - 2°20 Grad : 3340 mm work height max.: 860 mm : 575 mm Control: GP 37W2 : 13 - 33 0: max. 315 bar oil volume: 100 ltr. total power requirement: 6.0 kW weight of the machine ca.: 6030 + 1850 kg In good condition () current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left (GP 37W2) Machine control including information display Main display with 4 control panels Control/operation of all functions Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle ad ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 € : 1366.47 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...
maximum number of results exceeded
please refine your search
